Instrukcja obsługi Horizon Fitness SL4.0E HRC


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Horizon Fitness SL4.0E HRC (1 stron) w kategorii Rower treningowy. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/1
U N P A C K I N G
Unpack your elliptical trainer where you will be using
it. Place your trainer on a level flat surface. It is
recommended that you place a protective covering
on your floor. You will only need to attach the
following items. Verify that the following parts and
tools are included: FAILURE TO FOLLOW THESE
INSTRUCTIONS COULD RESULT IN INJURY!
• 1 Console
• 1 Foot Tube
• 1 Front Foot Tube
• 1 Rear Foot Tube
• 2 Upper Handlebars
• 2 Lower Handlebars
• 2 Pedal Arms
• 1 Console Mast
• 1 Console Mast Boot
• 1 Water Bottle and Holder
Par ts
NOTE: It is recommended that you apply grease
to the threads of each bolt as you assemble your
elliptieal trainer, to prevent loosening and that ALL
nuts and bolts are in place and partially threaded in
before completely tightening any ONE bolt.
LIMITED HOME USE WARRANTY
FRAME • LIFETIME
Horizon Fitness warrants the frame against defects in
workmanship and materials for the lifetime of the original
owner.
ELECTRONICS & PARTS
Horizon Fitness warrants the electronic components and all
original parts for aperiod from the date of original purchase, so
long as the device remains in the possession of the original
owner.
LABOR
Horizon Fitness shall cover the labor cost for the repair of the
device for a period from the date of the original purchase, so
long as the device remains in the possession of the original
owner.
EXCLUSIONS AND LIMITATIONS
This warranty applies only to the original owner and is not
transferable. The warranty is expressly limited to the repair or
replacement of a defective frame, electronic componet, or
defective part and is the sole remedy of the warranty.
The warranty does not cover normal wear and tear, improper
assembly or maintenance, or installation of parts or
accessories not originally intended or compatible with the
elliptical trainer as sold. The warranty does not apply to
damage or failure due to accident, abuse, corrosion,
discoloration of paint or plastic, or neglect. Horizon Fitness
shall not be responsible for incidental or consequential
damages. All returns must be pre-authorized by Horizon
Fitness. Horizon Fitness' obligation under this warranty is
limited to replacing or repairing, at Horizon Fitness' option, the
product at one of its authorized service centers. An Horizon
Fitness authorized service center must receive all products for
which a warranty claim is made. These products must be
received with all freight and other transportation charges
prepaid, accompanied by sufficient proof of purchase. Parts
and electronic components reconditioned to As New Condition
by Horizon Fitness or its vendors may sometimes be supplied
as warranty replacement parts and constitute fulfillment of
warranty terms. This warranty gives you specific legal rights,
and your rights may vary from state to state.
Please consult your local dealer for more
warrany details.
Horizon Fitness
COMMON PRODUCT QUESTIONS
ARE THE SOUNDS MY ELLIPTICAL TRAINER MAKES NORMAL?
Our elliptical trainer are some of the quietest available because they
use belt drives and friction free magnetic resistance. We use the
highest grade bearings and belts to minimize noise. However,
because the resistance system itself is so quiet, you will occasionally
hear other slight mechanical noise. Unlike older, louder technologies,
there are no fans, friction belts, or alternator noises to mask these
sounds on our elliptical trainer. These mechanical noises, which may
or may not be intermittent, are normal and are caused by the transfer
of significant amounts of energy to a rapidly spinning flywheel. All
bearings, belts and other rotating parts will generate some noise
which will transmit through the casing and frame. It is also normal for
these sounds to change slightly during a workout and over time
because of thermal expansion of the parts.
WHY IS THE ELLIPTICAL TRAINER I HAD DELIVERED LOUDER
THAN THE ONE AT THE STORE?
All fitness products seem quieter in a large store showroom because
there is generally more background noise than in your home. Also,
there will be less reverberation on a carpeted concrete floor than on
a wood overlay floor. Sometimes a heavy rubber mat will help reduce
reverberation through the floor. If a fitness product is placed close to
a wall, there will be more reflected noise.
HOW LONG WILL THE DRIVE BELT LAST?
The computer modeling we have done indicated virtually thousands
of maintenance free hours. Belts are now commonly used in far more
demanding applications such as motorcycle drives.
CAN I MOVE THE ELLIPTICAL TRAINER EAISER ONCE IT IS
ASSEMBLED?
Your Horizon Fitness elliptical trainer has a pair of transport wheels
built into the front foot. It is easy to move your elliptical trainer by
rolling it on the front transport wheels.
It is important that you place your Horizon Fitness elliptical trainer in
a comfortable and inviting room. Your elliptical trainer is designed to
use minimal floor space. Many people will place their elliptical trainer
facing the TV or a picture window. If at all possible, avoid putting your
elliptical trainer in a unfinished basement. To make exercise a
desirable daily activity for you, the elliptical trainer should be in a
attractive setting.
Assembly Guide
ASSEMBLY GUIDE
Important Safety Instruction
Save These Instructions
S L 3 . 0 E S L 4 . 0 E H R C
WHAT KIND OF ROUTINE MAINTENANCE IS REQUIRED?
We use sealed bearings throughout our elliptical trainer so lubrication
is not needed. The most important maintenance step is to simply
wipe your perspiration off the trainer after each use.
HOW DO I CLEAN MY HORIZON FITNESS ELLIPTICAL TRAINER?
Clean with soap and water cleaners only. Never use solvents on
plastic parts. Cleanliness of your Horizon Fitness elliptical trainer and
its operating environment will keep maintenance problems and
service calls to a minimum. For this reason. Horizon Fitness
recommends that the following preventive maintenance schedule be
followed.
AFTER EACH USE (DAILY)
Turn off the elliptical trainer with the on/off switch, and unplug the
power cord from the wall outlet.
STEP 2
STEP 4
STEP 3
STEP 9
STEP 1
SL3.0E SL4.0E HRC
A) M10x55mm bolt
quantity: 4
B) 18mm spring washer
quantity: 4
C) 20mm flat washer
quantity: 4
D) M5x12mm bolt
quantity: 4
quantity: 4
F) 17mm arc washerE) M8x15mm bolt
quantity: 4
K) M5 L) M4
quantity: 12
I) M4x10mm bolt J) 10mm bolt
quantity: 4
quantity: 2
H) 4x10mm boltG) M3x22L bolt
quantity: 8
STEP 5
STEP 6
STEP 7
STEP 8
M) 15#17#
HARDWARE
C
B
A
C
B
A
MKFE
K
J
LK
G
K
I I
H
KD
I
K
G
I
CONSOLE
UPPER HANDLE BAR
CONSOLE MAST
WATER BOTTLE
& HOLDER
CONSOLE MAST
BOOT
PEDAL ARM
LOWER
HANDLE BAR
FRONT FOOT
TUBE
REAR FOOT
TUBE


Specyfikacje produktu

Marka: Horizon Fitness
Kategoria: Rower treningowy
Model: SL4.0E HRC

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Horizon Fitness SL4.0E HRC, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Rower treningowy Horizon Fitness

Instrukcje Rower treningowy

Najnowsze instrukcje dla Rower treningowy

Body Sculpture

Body Sculpture BMG-4700C Instrukcja

15 Października 2024
Tacx

Tacx Bushido Smart T2780 Instrukcja

10 Października 2024
Christopeit

Christopeit ET 3.1 Instrukcja

9 Października 2024
Christopeit

Christopeit HT 2.2 Instrukcja

8 Października 2024
Assault Bike

Assault Bike Elite Instrukcja

8 Października 2024
Assault Bike

Assault Bike Pro X Instrukcja

8 Października 2024
Christopeit

Christopeit S-Bike Instrukcja

7 Października 2024
Body Sculpture

Body Sculpture BE-6115 Instrukcja

7 Października 2024
SportsArt

SportsArt TR12 Instrukcja

6 Października 2024