Instrukcja obsługi Honeywell Voyager 1400g

Honeywell czytnik kodów kreskowych Voyager 1400g

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Honeywell Voyager 1400g (216 stron) w kategorii czytnik kodów kreskowych. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/216

™

Voyager™ 1400g Series

Area-Imaging Scanner

User’s Guide

Disclaimer

Honeywell International Inc. (“HII”) reserves the right to make changes in speci-

fications and other information contained in this document without prior notice,

and the reader should in all cases consult HII to determine whether any such

changes have been made. The information in this publication does not repre-

sent a commitment on the part of HII.

HII shall not be liable for technical or editorial errors or omissions contained

herein; nor for incidental or consequential damages resulting from the furnish-

ing, performance, or use of this material. HII disclaims all responsibility for the

selection and use of software and/or hardware to achieve intended results.

This document contains proprietary information that is protected by copyright.

All rights are reserved. No part of this document may be photocopied, repro-

duced, or translated into another language without the prior written consent of

HII.

Web Address: www.honeywellaidc.com

Microsoft® Windows® is a trademark or registered trademark of Microsoft Cor-

poration.

Other product names or marks mentioned in this document may be trademarks

or registered trademarks of other companies and are the property of their

respective owners.

Product Agency Compliance

USA

FCC Part 15 Subpart B Class B

This device complies with part 15 of the FCC Rules. Operation is subject to

the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including

interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a

Class B digital device pursuant to part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interference

in a residential installation. This equipment generates, uses, and can radi-

ate radio frequency energy and, if not installed and used in accordance

with the instructions, may cause harmful interference to radio communica-

tions. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning the equip-

ment off and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

• Consult the dealer or an experienced radio or television technician for

help.

If necessary, the user should consult the dealer or an experienced radio/

television technician for additional suggestions. The user may find the fol-

lowing booklet helpful: “Something About Interference.” This is available at

FCC local regional offices. Honeywell is not responsible for any radio or

television interference caused by unauthorized modifications of this equip-

ment or the substitution or attachment of connecting cables and equipment

other than those specified by Honeywell. The correction is the responsibil-

ity of the user.

Use only shielded data cables with this system. This unit has been tested

with cables less than 3 meters. Cables greater than 3 meters may not meet

class B performance.

Caution: Any changes or modifications made to this equipment not

expressly approved by Honeywell may void the FCC authorization to oper-

ate this equipment.

Specyfikacje produktu

Marka:	Honeywell
Kategoria:	czytnik kodów kreskowych
Model:	Voyager 1400g
Kolor produktu:	Czarny
Wysokość produktu:	43 mm
Szerokość produktu:	66 mm
Głębokość produktu:	180 mm
Waga produktu:	119 g
Długość kabla:	1.5 m
Technologia łączności:	Przewodowa
Zakres temperatur (eksploatacja):	0 - 40 °C
Zakres wilgotności względnej:	0 - 95 %
Kod zharmonizowanego systemu (HS):	84716070
Pobór mocy w trybie czuwania:	0.45 W
Napięcie:	4 - 5.5 V
Zakres temperatur (przechowywanie):	-40 - 60 °C
Model:	Ręczny czytnik kodów kreskowych
Stopień ochrony IP:	IP42
Typ skanera:	1D/2D
Zużycie energii:	400 mA
Standardowe interfejsy:	USB
Poziomy światła (bezpośrednie światło słoneczne):	0 - 100000 lx
Odczyt pod kątem nachylenia:	0 - 60 °
Obsługa kodów kreskowych typu Matrix (2D):	PDF417
Rozdzielczość czujnika optycznego:	640 px