Instrukcja obsługi Honeywell RDWL311A

Honeywell dzwonek do drzwi RDWL311A

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Honeywell RDWL311A (24 stron) w kategorii dzwonek do drzwi. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/24

Home

RDWL311A2000

Installation and Operation Guide

Portable Wireless Doorbell

Preparation

Doorbell

Push

Button

Wall

Anchors

Round Head

Screws

Flat Head

Screws

Phillips Screwdriver

Standard Screwdriver

Drill and 1/4 in. (6 mm) drill bit

4 AA alkaline batteries

Doorbell Wall

Mounting Bracket

Push Button Mounting

Bracket

and Adhesive Pad

To install you will needIn the box you will find

The push button supplied with this kit is pre-programmed to operate with the doorbell.

If it is not, see “Connect a Push Button” on page 4.

CR2032

Battery

Overview

Just follow these simple steps:

1. Install batteries.

2. Set up the doorbell and your preferences.

3. Install the doorbell and the push button.

Safety

Before proceeding with the installation, please note the following safety

warnings:

• Always follow the manufacturer’s advice when using power tools and wear

suitable protective equipment (e.g. safety goggles) when drilling holes, etc.

• Before drilling holes in walls, check for hidden electricity cables and water

pipes. The use of a cable/pipe locator is advisable if in doubt.

Install Batteries

1. Open the battery cover and install 4

AA alkaline batteries.

2. Open the battery cover and install the

CR2032 battery.

Change the Tune

Press the Music button to change the doorbell tune.

Every time you press the Music button,

the tune will change. Stop pressing the

Music button when you hear the tune you

want:

Ding Dong

Westminster

Soft Alert

Smart Sax

Setup and Operation

Press the push button to test whether it is paired with the doorbell. The

doorbell will ring. If it does not, see “Connect a Push Button” on page 4.

Install Doorbell

If you are not mounting the doorbell to the wall, place

it where you want it.

1. Screw the doorbell wall mounting bracket to the

wall using the included screws and anchors (if

necessary).

Drill 1/4 inch holes for the anchors.

2. Hang the doorbell on the mounting bracket.

Installation

Choose a location that is not near a heat source or on something that moves

(like a door). For non-mounting locations, choose a place where the doorbell

will be easy to hear.

Install Push Button

1. Mount the push button bracket

in the desired location.

Use the screws

–OR–

Use the adhesive backing. If

using the adhesive backing,

clean the surface first.

2. Snap the push button onto the

mounting bracket.

–OR–

Note: If you need to remove the push button, use a small

screwdriver to release the tab.

Specyfikacje produktu

Marka:	Honeywell
Kategoria:	dzwonek do drzwi
Model:	RDWL311A
Kolor produktu:	Grey, White
Technologia łączności:	Bezprzewodowy
Rodzaj baterii:	AA
Liczba baterii:	4
Wbudowana kamera/aparat:	Nie
Wysokość dzwonka:	110 mm
Szerokość dzwonka:	69.85 mm
Głębokość dzwonka:	42.41 mm
Żywotność baterii:	24 mies.
Liczba melodii:	4
Głośność:	80 dB
Uchwyt montażowy dołączony:	Tak