Instrukcja obsługi Honeywell Performance HD251H

Honeywell Kamera monitorująca Performance HD251H

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Honeywell Performance HD251H (2 stron) w kategorii Kamera monitorująca. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/2

800-19022 - - D 08/2014

Performance Series

HD251H Super High Resolution VFAI

Rugged Indoor/Outdoor Minidome Camera

Quick Installation Guide

800-19022– Rev D– 08/2014

FCC Compliance Statement

Information to the user: This equipment has been tested and found to comply with the

limits for a Class A digital device. Pursuant to part 15 of the FCC Rules, these limits are

designed to provide reasonable protection against harmful interference when the

equipment is operated in a commercial environment. This equipment generates, uses and

can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. Operation of this

equipment in a residential area is likely to cause harmful interference in which case the user

will be required to correct the interference at his own expense.

CAUTION Changes or modifications not expressly approved by

the party responsible for compliance could void the user’s authority to

operate the equipment.

Canadian Compliance Statement

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la Classe A est conforme à la norme NMB-003 du Canada.

Warranty and Service

Subject to the terms and conditions listed on the Product warranty, during the warranty

period Honeywell will repair or replace, at its sole option, free of charge, any defective

product returned prepaid.

In the event you have a problem with any Honeywell product, please call Customer Service

at 1.800.323.4576 (North America only) for assistance or to request a Return Merchandise

Authorization (RMA) number.

Be sure to have the model number, serial number, and the nature of the problem available

for the technical service representative.

Prior authorization must be obtained for all returns, exchanges, or credits. Items shipped

to Honeywell without a clearly identified Return Merchandise Authorization (RMA)

number may be refused.

Note The manufacturer is not responsible for any damage caused by improper use of

the product or failure to follow instructions for the product.

CAUTION THIS SYMBOL INDICATES THAT

DANGEROUS VOL TAGE

CONSTITUTING A RISK OF

ELECTRIC SHOCK IS PRESENT

WITHIN THE UNIT.

CAUTION:TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVETHE COVER.

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

THI S SYMBOL INDICATES THAT

IMPORTANT OPERATING AND•

MAINTENANCE INSTRUCTIONS

ACCOMPANY THIS UNIT.

RISK OF ELECTRIC

SHOCK

DO NOT OPEN

1. Important Safety Instructions

BEFORE OPERATING OR INSTALLING THE UNIT, READ AND FOLLOW ALL

INSTRUCTIONS.

AFTER INSTALLATION, retain the safety and operating instructions for future

reference.

1. HEED WARNINGS - Adhere to all warnings on the unit and in the operating

instructions.

2. INSTALLATION

• Install in accordance with the manufacturer’s instructions.

• Installation and servicing should be performed only by qualified and

experienced technicians to conform to all local codes and to maintain your

warranty.

• Any wall or ceiling mounting of the product should follow the manufacturer’s

instructions and use a mounting kit approved or recommended by the

manufacturer.

3. POWER SOURCES - This product should be operated

only from the

type of power

source indicated on the marking label. If you are not sure of the type of power

supplied to your facility, consult your product dealer or local power company.

WARNING

This device is configured for 12 V DC or 24 V AC

operation; do NOT connect to higher voltage. Use only with

NRTL-approved class 2 power supplies.

4. HEAT

- Situate away from items that produc

e heat or are heat sources such as

radiators, heat registers, stoves, or other products (including amplifiers).

5. MOUNTING SYSTEM - Use only with a mounting system recommended by the

manufacturer, or sold with the product.

6. ATTACHMENTS - Do not use attachments not recommended by the product

manufacturer as they may result in the risk of fire, electric shock, or injury to persons.

7. ACCESSORIES - Only use accessories specified by the manufacturer.

8. CLEANING

- Do not use liquid cleaners or ae

rosol cleaners. Use a damp cloth for

cleaning.

9. SERVICING - Do not attempt to service this unit yourself as opening or removing

covers may expose you to dangerous voltage or other hazards. Refer all servicing to

qualified service personnel.

10. REPLACEMENT PARTS - When replacement parts are required, be sure the service

technician has used replacement parts specified by the manufacturer or have the

same characteristics as the original part. Unauthorized substitutions may result in

fire, electric shock or other hazards.

2. Precautions

Precautions for use

• Read and keep these instructions.

• This camera should be installed by qualified personnel only.

• There are no user-serviceable parts inside. Do not dissemble this camera other than

to make the initial adjustments.

• Do not touch the camera lens, dome, or bezel (front glass plate).

• Do not drop the camera or subject it to physical shock.

• Do not use a strong or abrasive detergent when cleaning the camera.

• Use a UL-approved regulated 12 V DC or 24 V AC power supply.

• Use an appropriate low voltage power cable to prevent fire or electrical shock.

• Please ensure that your installation area can support the weight of the camera.

Operating Conditions

• Avoid aiming the camera towards an extreme light source (for example, light fixtures)

to prevent damaging the CCD. Do not view direct sunlight with the camera.

• Avoid operating or storing the unit in the following locations:

• Extremely humid, dusty, hot/cold environments; extreme temperature

conditions where the operating temperature is outside the recommended

range of 14°F to 122°F (–10°C to 50°C). Be especially careful to provide

ventilation when operating under high temperatures.

• Close to sources of powerful radio or TV transmitters.

• Near a cooling or heating device.

• Close to fluorescent lamps or objects reflecting light.

• Under unstable light sources (may cause flickering).

3. Package Includes

• HD251H camera

• Configuration Guide

• Quick Install Guide (this document)

• Hardware Installation kit (including screws and an Allen key)

• Local Video Output and power cables

4. Cable Connections

Key Features

• 1/3ʺ Sony 960H CCD

• 700 TV lines

• Day/night

• 2.8 – 12 mm DC VFAI lens

• 8 Privacy Zones

• Mirror function

• User-friendly design for easy access

and adjustment of camera settings

• Vandal-proof and weather-resistant

housing: IP66 rating

• 3-D axis gimbal

• Local Video Out port for setup and

configuration

• Backlight compensation

• 12 V DC / 24 V AC power supply

• Quick and easy setup with 6 presets

2 | HD251H Rugged Indoor/Outdoor Fixed Minidome Quick Install Guide

www.honeywell.com/security

+1 800 323 4576 (North America only)

https://www.honeywellsystems.com/ss/techsupp/index.html

means without written permission from Honeywell. The information in this publication is believed to be accurate

in all respects. However, Honeywell cannot assume responsibility for any consequences resulting from the use

thereof. The information contained herein is subject to change without notice. Revisions or new editions to this

publication may be issued to incorporate such changes.

Document 800-19022 – Rev D – 08/2014

5. Camera Installation

1. Remove the dome from the

housing base by loosening

the captured screws on the

dome.

2. Connect the yellow video

output connector to the

video input port on your

monitor/DVR. Connect the

red power connector to

your 12 V DC power

source. Feed the cables

into the hole in the

mounting surface (such as

a ceiling, see graphic).

3. Install the housing base

onto the mounting surface

using the three mounting

screws provided.

4. Connect the local video

output cable to the video

output connector on the

camera board, located

behind the lens and gimbal.

Connect the other end of

the video connector to the

monitor you will use while

setting up the camera.

Note The video output

connector on the

camera board is

located next to the OSD

menu controls that you

can use to make

configuration changes.

5. While monitoring the

camera picture on the monitor, adjust the camera position (orientation), zoom and

focus settings (as described in the Camera Positioning, Zoom and Focus Adjustment

section).

6. Using the connected monitor, make camera configuration changes through the OSD

menus (see the Configuration Guide included with your camera for more

information).

7. Re-install the dome cover to the housing base by aligning the captured screws to the

screw holes, and then tightening the screws.

Video and

power cable

(see the Cable

Connections

diagram).

Dome

cover

2nd video

output

connector

Mounting

surface

Housing

base

Mounting

screws

Captured

screws

6. Camera Positioning, Zoom and Focus Adjustment

1. With the dome removed, you can see that the lens is surrounded by a protective

shroud (see the image below).

2. Use two hands to draw back the shroud from the lens by placing both thumbs on the

upper front section of the shroud with your fingers bracing the back side of the lens

and pushing your thumbs towards your fingers (see the image below).

3. Position the camera lens and gimbal so that the camera is viewing the required video

scene. Use the connected monitor to check that the field of view is oriented correctly

as you make the adjustments. You can pan the entire camera board and gimbal

(360°, labeled A in graphic above). Tilt the camera lens up and down (90°, labeled B),

and/or rotate the lens (360°, C).

4. Use the three points of

adjustment (A, B, and C) to

position the camera

correctly.

5. Use the two levers located

on the lens to adjust zoom

and focus, as needed (see

the image for zoom and

focus lever locations).

6. When the camera is

correctly positioned,

zoomed and focused, push

the shroud back together

with the lens.

When you push the shroud back together with the lens, this will change the tilt angle that you

have set for the lens (adjustment labeled B). When the shroud and lens are snapped back

together, tilt both pieces back to the desired lens position.

Place thumbs

here to push

back shroud

Place fingers behind

the lens to brace it

when pushing back

the shroud

Camera

shroud

and lens

Focus

adjustment

Zoom

adjustment

8. Specifications

Video Standard NTSC

Scanning System 2:1 interlace

Image Sensor 1/3ʺ Sony 960H CCD

Number of Pixels (H × V) 1020 × 508

Minimum Illumination 0.1 lux @ F1.4, 30 IRE (color)

Horizontal Resolution 700 TVL

Video Output 1.0 Vp-p, composite @ 75 ohms

Sync System Internal

S/N Ratio 52 dB (AGC off, weight on)

Auto Gain Control Off/Low/Mid/High

Automatic Electronic Shutter 1/60 – 1/100,000 s

White Balance ATW/AWB/AWC/Manual

BLC/HSBLC Off/On

Day/Night Color/BW/Auto/Ext

Lens Type 2.8 – 12 mm DC VFAI

Angle of View H: 99.8°–25.0° V: 72.5°– 18.7°

Sense-Up Auto (×2 to ×256)

Mirror Function Off/Mirror/V-Flip/Rotate

Motion Detection Off/On (4 programmable zones)

Privacy Masking Off/On (8 programmable zones)

D-WDR Off/Indoor/Outdoor (level adjustable)

Sharpness Off/On (level adjustable)

Input Voltage 12 V DC / 24 V AC

Input Range 12 V DC ±10% / 24 V DC ±10%

Power Consumption 4 W (max.)

Dimensions (W × H) 5.9 × 3.9 in. (150 × 100 mm)

Weight 1.83 lb (0.83 kg)

Construction Housing: Die-cast aluminum

Dome: Polycarbonate

Temperature Operating: 14°F to 122°F (–10°C to 50°C)

Storage: –4°F to 140°F (–20°C to 60°C)

Relative Humidity 0% to 95%, non-condensing

Rating IP66

Specyfikacje produktu

Marka:	Honeywell
Kategoria:	Kamera monitorująca
Model:	Performance HD251H

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Honeywell Performance HD251H, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Kamera monitorująca Honeywell

Honeywell HD3C Instrukcja

23 Września 2024

Honeywell Equip HCD5WIH Instrukcja

19 Września 2024

Honeywell HDZ30A Instrukcja

14 Września 2024

Honeywell Performance HD31H Instrukcja

13 Września 2024

Honeywell HD50 Instrukcja

11 Września 2024

Honeywell Equip HDZ30 Instrukcja

10 Września 2024

Honeywell Performance HBW8PR2 Instrukcja

10 Września 2024

Honeywell HDZ36AEX Instrukcja

10 Września 2024

Honeywell HCS544 Instrukcja

7 Września 2024

Honeywell RCHC4100WF1002 Instrukcja

31 Sierpnia 2024

Instrukcje Kamera monitorująca

Najnowsze instrukcje dla Kamera monitorująca

Trebs CCD-401C Instrukcja

15 Października 2024

Hikvision DS-2CE56D5T-AIRZ Instrukcja

15 Października 2024

D-Link DCS-7510 Instrukcja

15 Października 2024

Ubiquiti Networks UniFi Video UVC-G3-AF Instrukcja

14 Października 2024

Hikvision DS-2TD2137-7/VP Instrukcja

13 Października 2024

Alecto DVC-215IP Instrukcja

13 Października 2024

Hikvision DS-2DE7A245IX-AE/S1 Instrukcja

13 Października 2024

Hikvision DS-2TD2166-15/V1 Instrukcja

13 Października 2024

Hikvision DS-2CD2325FWD-I Instrukcja

13 Października 2024

Hikvision DS-2CD2323G2-IU Instrukcja

12 Października 2024