Instrukcja obsługi Honeywell HY254E4

Honeywell Wentylator HY254E4

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Honeywell HY254E4 (21 stron) w kategorii Wentylator. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/21
1
IMPORTANT SAFETY
INSTRUCTIONS
READ AND SAVE THESE SAFETY
INSTRUCTIONS BEFORE USING
THIS FAN
When using electrical appliances,
basic precautions should always
be followed to reduce the risk of
fire, electric shock, and injury to
persons, including the following:
FOR US MODELS ONLY – This product
employs overload protection (fuse). A blown
fuse indicates an overload or short-circuit
situation. If the fuse blows, unplug the product
from the outlet. Replace the fuse as per the
user servicing instructions (follow product
marking for proper fuse rating) and check
the product. If the replacement fuse blows,
a short-circuit may be present and the
product should be discarded or returned to an
authorized service facility for examination and/
or repair.
1. Use this fan only as described in this
manual. Other use not recommended as
it may cause fire, electric shock or injury
to persons.
2. This product is intended for household
use ONLY and not for commercial,
industrial or outdoor use.
3. To protect against electric shock, do not
place fan in window, immerse unit, plug
or cord in water or spray with liquids.
4. This appliance has a polarized plug
(one blade is wider than the other). To
reduce the risk of shock, this plug is
intended to fit only one way in a polarized
outlet. If the plug does not fit fully in the
outlet, reverse the plug. If it still does
not fit, contact a qualified electrician.
DO NOT attempt to defeat this safety
feature.
5. Close supervision is necessary when any
appliance is used by or near children.
6. Turn the fan and unplug the fan from OFF
the outlet when not in use, when moving
the fan from one location to another and
before cleaning.
7. To disconnect the fan, first turn the unit
OFF, grip the plug and pull it from the wall
outlet. Never pull the plug by the cord.
8. Do not operate the fan in the presence of
explosive and/or flammable fumes.
9. Do not place the fan or any parts near
an open flame, cooking or other heating
appliance.
10. Do not operate the fan with a
damaged cord or plug or if the product
malfunctions, is dropped
or damaged in any manner
(see warranty).
11. Avoid contact with moving fan parts.
12. The use of attachments not
recommended by the manufacturer may
be hazardous.
13. Place the fan on a dry level surface.
14. Do not hang or mount fan on a wall
or ceiling.
15. Do not operate if the fan housing is
damaged.
QUIETSET®
WHOLE ROOM TOWER FAN
HY-254 Series
HY-280 Series
Owner’s Manual
The Honeywell Trademark is used by Kaz USA, Inc. under license from Honeywell International Inc.
Honeywell International Inc. makes no representation or warranties with respect to this product.
2
16. A loose fit between the AC outlet
(receptacle) and plug may cause
overheating and a distortion of the plug.
Contact a qualified electrician to replace
loose or worn outlet.
17. Do not operate any fan with a damaged
cord or plug. Discard any damaged fan,
return the fan to the retailer where the
fan was purchased, or request a return
authorization to return to Kaz USA, Inc. for
examination and/or repair.
18. Do not run fan cord under carpeting. Do
not cover cord with throw rugs, runners,
or similar coverings. Do not route cord
under furniture or appliances. Arrange
cord away from traffic areas and where it
will not be tripped over.
WARNING: To Reduce The Risk of Fire or
Electric Shock, Do Not Use This Fan With
Any Solid-State Speed Control Device,
other than the one supplied.
USER SERVICING INSTRUCTIONS
• Grasp plug and remove from the receptacle or other outlet device.
Do not unplug by pulling on cord.
• If your fan loses power and you suspect that the fuse on your fan
has blown, you should first remove the spare fuse holder attached
to the cord plug (Fig. 1). Remove the spare fuse from the plastic
spare fuse holder, and set the spare fuse aside (Fig. 2).
• You can gain access to the blown fuse by sliding open the door
found on the side of the plug. Slide the door outward until the
blown fuse is fully visible (Fig. 3).
• Carefully remove the blown fuse and snap the replacement fuse
into place. Risk of fire. Replace fuse only with 2.5 Amp, 125 volt
fuse (provided with product). Fully close the fuse door by sliding
back into place. Discard the blown fuse. The plug should now be
ready for normal use.
• Risk of fire. Do not replace attached plug. Contains a safety device
(fuse) that should not be removed. Discard product if the attached
plug is damaged.
• If you need further information on how or when to replace the
fuse in the safety plug, please contact Kaz Consumer Relations
Department by visiting our website at www.kaz.com or calling
1-800-477-0457.
Thank you for your purchase.
This fan features a fused safety plug which is designed to cut off electric current to the fan if an
electrical fault occurs. Please see below for more information on how to properly use your fan and
replace the safety plug fuse, if needed.
FUSED SAFETY PLUG - FOR US ONLY
Fig. 1
Fig. 2
Fig. 3
5
On/Off
To turn fan on, press the Power button ( )
located on the left side of the control panel.
Current room temperature will be displayed
whenever fan is on.
Speed Control
The fan will automatically start on “Sleep” speed
when initially turned on. To adjust
the speed up or down, press the Fan Speed
button ( ) repeatedly to increase level.
Oscillation
To activate the Oscillation feature, press the
Oscillation button ( ) once.
Press the again to turn the Oscillation button
Oscillation feature off.
Timer
Choose from 1, 2, 4, or 8 hour settings by performing the following function:
• 1 hour: Press the (Timer button ) once.
• 2 hours: Press the twice.Timer button
• 4 hours: Press the a third time.Timer button
• 8 hours: Press the a fourth time.Timer button
Press the a fifth time to turn the Timer feature off. Timer button
HY-280 SERIES FAN OPERATION
On/Off
Press the (Power button ) once to turn the fan on. Press the
Power button a second time to turn the fan off.
Speed Control
The fan will automatically start on “Sleep” speed when initially
turned on. To adjust the speed up or down, press the Fan
Speed button () repeatedly to increase level
Oscillation
To activate the Oscillation feature, press the Oscillation button
( ) once.
Press the again to turn the Oscillation Oscillation button
feature off.
Remote Control Storage
When it is not in use, the remote control may be stored in the
recessed area located behind the controls (Fig. 10).
HY-254 SERIES REMOTE CONTROL OPERATION
Fig. 10
®
Model HY-280

Specyfikacje produktu

Marka: Honeywell
Kategoria: Wentylator
Model: HY254E4

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Honeywell HY254E4, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Wentylator Honeywell

Honeywell

Honeywell 53006 Instrukcja

10 Marca 2025
Honeywell

Honeywell TurboForce HF710 Instrukcja

27 Lutego 2025
Honeywell

Honeywell Febreze Freshness HY-204 Instrukcja

29 Grudnia 2024
Honeywell

Honeywell HT-900E Instrukcja

9 Października 2024
Honeywell

Honeywell CL40 Instrukcja

1 Października 2024
Honeywell

Honeywell Sunset Key 10288 Instrukcja

29 Września 2024
Honeywell

Honeywell Wicker Park 10268 Instrukcja

29 Września 2024
Honeywell

Honeywell Elston 10290 Instrukcja

29 Września 2024
Honeywell

Honeywell Eastover 10214 Instrukcja

29 Września 2024
Honeywell

Honeywell Tech Force HT-9700 Instrukcja

29 Września 2024

Instrukcje Wentylator

Najnowsze instrukcje dla Wentylator

Bimar

Bimar VTR2 Instrukcja

24 Marca 2025
Sharkoon

Sharkoon SHARK Mirror PWM RGB Instrukcja

22 Marca 2025
Unold

Unold Breezy Bowl 86679 Instrukcja

20 Marca 2025
Lasko

Lasko Motion-Air C27100 Instrukcja

18 Marca 2025
Lasko

Lasko Decor Colors B20401 Instrukcja

18 Marca 2025
Lasko

Lasko Air Flexor 3637 Instrukcja

18 Marca 2025
Lasko

Lasko H20685 Instrukcja

18 Marca 2025
Lasko

Lasko Max Performance 2265QM Instrukcja

18 Marca 2025
Toshiba

Toshiba F-TSA20GMY Instrukcja

18 Marca 2025
Cecotec

Cecotec EnergySilence Aero 3050 Instrukcja

12 Marca 2025