Instrukcja obsługi Honeywell Granit 1280i

Honeywell czytnik kodów kreskowych Granit 1280i

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Honeywell Granit 1280i (164 stron) w kategorii czytnik kodów kreskowych. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/164

Granit™ 1280i

Industrial Full Range Laser Scanner

User’s Guide

Disclaimer

Honeywell International Inc. (“HII”) reserves the right to make changes in specifications and other information contained in this

document without prior notice, and the reader should in all cases consult HII to determine whether any such changes have been

made. The information in this publication does not represent a commitment on the part of HII.

HII shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages

resulting from the furnishing, performance, or use of this material.

This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this document

may be photocopied, reproduced, or translated into another language without the prior written consent of HII.

Web Address: www.honeywellaidc.com

Granit is a trademark or registered trademark of Honeywell International Inc.

Microsoft® Windows®, Windows NT®, Windows 2000, Windows ME, Windows XP, and the Windows logo are trademarks or

registered trademarks of Microsoft Corporation.

Other product names or marks mentioned in this document may be trademarks or registered trademarks of other companies

and are the property of their respective owners.

Product Agency Compliance - Granit 1280i

USA

FCC Part 15 Subpart B Class B

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the

FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential instal-

lation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accor-

dance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the inter-

ference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio or television technician for help.

If necessary, the user should consult the dealer or an experienced radio/television technician for additional suggestions.

The user may find the following booklet helpful: “Something About Interference.” This is available at FCC local regional

offices. Honeywell is not responsible for any radio or television interference caused by unauthorized modifications of this

equipment or the substitution or attachment of connecting cables and equipment other than those specified by Honeywell.

The correction is the responsibility of the user.

Use only shielded data cables with this sted with cables less than 3 meters. Cables greater system. This unit has been te

than 3 meters may not meet class B performance.

Caution: Any changes or modifications made to this equipment not expressly approved by Honeywell may void the FCC

authorization to operate this equipment.

TÜV-R Statement

TÜV R listed: UL 60950-1, Second Edition and CSA C22.2 No.60950-1-07, Second Edition.

Canada

Industry Canada ICES-003

This Class B digital apparatus complies with Canadian ICES-003. Operation is subject to the following conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may cause undesired operation.

Conformité à la règlementation canadienne

Cet appareil numérique de la Classe A est conforme à la norme NMB-003 du Canada. Son fonctionnement est assujetti

aux conditions suivantes :

1. Cet appareil ne doit pas causer de brouillage préjudiciable.

2. Cet appareil doit pouvoir accepter tout brouillage reçu, y compris le brouillage pouvant causer un fonctionnement

indésirable.

TÜV-R Statement

TÜV R listed: UL 60950-1, Second Edition and CSA C22.2 No.60950-1-07, Second Edition.

TÜV Rheinland

Specyfikacje produktu

Marka:	Honeywell
Kategoria:	czytnik kodów kreskowych
Model:	Granit 1280i
Kolor produktu:	Black, Orange
Rodzaj zasilania:	DC
Wysokość produktu:	195 mm
Szerokość produktu:	75 mm
Głębokość produktu:	133 mm
Waga produktu:	335 g
Technologia łączności:	Przewodowa
Zakres temperatur (eksploatacja):	-30 - 50 °C
Zakres wilgotności względnej:	0 - 95 %
Kod zharmonizowanego systemu (HS):	84716070
Pobór mocy w trybie czuwania:	0.75 W
Pobór mocy:	1.80 W
Zakres temperatur (przechowywanie):	-40 - 70 °C
Model:	Ręczny czytnik kodów kreskowych
Stopień ochrony IP:	IP65
Typ skanera:	1D
Standardowe interfejsy:	RS-232
Typ przetwornika obrazu:	Laser
Obsługa liniowych kodów kreskowych (1D):	Codabar, Code 11, Code 128, Code 32, Code 39, Code 93, EAN-13, EAN-8, GS1-128 (UCC/EAN-128), MSI, Plessey, Trioptic, U.P.C.
Odczyt pod kątem nachylenia:	-65 - 65 °
Obsługa kodów kreskowych typu Matrix (2D):	Nieobsługiwany
Kąt odchylenia odczytu:	-65 - 65 °
Regulowany kąt odczytu:	-10 - 10 °