Instrukcja obsługi Honeywell CL25AE

Honeywell klimatyzacja CL25AE

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Honeywell CL25AE (7 stron) w kategorii klimatyzacja. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/7

CL25AE

www.honeywellaircoolers.com/products/CL25AE

www.jmatek.com

E-mail: usinfo@jmatek.com

Model:

Portable Evaporative Air Cooler

User Manual

Read and save these instructions before use

Product video:

EN 1

5) Casters

6) Ice Compartment Lid

7) Vertical Louvers

8) Water Level Indicator

9) Remote Control

10) Water Fill Door

11) Drain Plug

12) Water Tank

1) Control Panel

2) Handle

3) Horizontal Louvers

4) Power Cord & Plug

PARTS DESCRIPTION

USE & OPERATION

(1)

(9)

(3)

(2)

(4)

(12)

(7)

(8)

(6)

(5)

(11)

(10)

CONTROL PANEL

FUNCTION BUTTONS

POWER

Press the POWER button to turn the unit on. The cooler will start automatically at medium speed. After a

few seconds the speed will switch to low. To turn the unit off, press the button again.

SPEED

Press the SPEED button repeatedly to change the speed between Lo - Med - Hi - Sleep*.

The indicator light will show the selected speed:

When the SLEEP mode is selected, the fan will run on High for one hour, then Medium for the second

hour and on Low speed from the third hour onwards until you switch off the unit.

Low (Lo) Medium (Med) High (Hi) Sleep (Sleep)*

WARNING -- READ AND SAVE THE AIR COOLER SAFETY & MAINTENANCE GUIDE AND USER

MANUAL BEFORE USING THIS PRODUCT. FAILURE TO FOLLOW THESE INSTRUCTIONS MAY

DAMAGE AND/ OR IMPAIR ITS OPERATION AND VOID THE WARRANTY. IN CASE THERE IS

ANY INCONSISTENCY OR CONFLICT BETWEEN THE ENGLISH VERSION AND ANY OTHER

LANGUAGE VERSION OF THE CONTENT OF THIS MATERIAL, THE ENGLISH VERSION SHALL

PREVAIL.

POWER

Tank Empty

MODE

Fan Cool

TIMER

0.5hr 1hr 2hr 4hr

SPEED

Sleep Lo Med Hi

SWING

*Applicable for models with Sleep feature only.

EN 2

TIMER

Press the TIMER button until the desired time duration setting is selected. When the set time has

passed, the unit will automatically turn off (unit remains in Standby mode until power cord is unplugged

from electrical socket). The TIMER function allows you to program the unit for up to 7.5 hours of use.

SWING

Press the SWING button until the SWING indicator light is illuminated on the control

panel. The louvers will begin to move left to right automatically.

Vertical Air Flow - You can manually adjust the louvers to change vertical air ﬂow.

MODE

Press the MODE button to select COOL and FAN modes. Pressing the MODE button until COOL is

illuminated on the control panel activates evaporative cooling. The water pump will operate and you will

feel the cooler air after the Honeycomb Cooling Media is completely wet.

Pressing the MODE button until Fan is illuminated switches the unit to a fan only mode, without

evaporative cooling.

USE & OPERATION (CONTINUED)

REMOTE CONTROL

FUNCTION BUTTONS (CONTINUED)

ROOM COOLING AND HUMIDIFYING

LOUVER

MOVEMENT

: ON / OFF

: Low / Medium / High / Sleep*

: Controls cooling or fan option

: Controls the motion of the louvers

: Controls the Timer function for automatic off

The remote control requires AAA (2 x 1.5V) batteries for replacement.

Open the battery compartment at the back of the remote control and insert the batteries inside. Care

must be taken to insert the batteries according to the correct polarity (+ / –) markings shown inside

the battery compartment.

Always point the remote control signal transmitter towards the unit when operating. Make sure that

the signal path is not obstructed.

Remove the batteries if the unit is not going to be used for an extended period of time.

Do not drop the remote control.

Note:

POWER

SPEED

MODE

SWING

TIMER

Water Regulator

MIN

MAX

In cooling mode, Honeywell Air Coolers provide moisturized air through the

evaporation of water. There is a manual Water Regulator knob located in

the ice compartment of the unit. This allows you to adjust the amount of

water pumped over the Honeycomb Cooling Media, thus helping to control

cooling and humidiﬁcation levels.

When the Water Regulator is set to MIN, the water pump distributes a

minimal amount of water to the Honeycomb Cooling Media. This results in

less water evaporation and reduces the cooling effect.

When the Water Regulator is set to MAX, the water pump distributes the maximum amount of water to

the Honeycomb Cooling Media. This results in maximum water evaporation and the cooling performance

improves.

POWER

SP EED S WING

T IMERMODE

*Applicable for models with Sleep feature only.

Specyfikacje produktu

Marka:	Honeywell
Kategoria:	klimatyzacja
Model:	CL25AE
Kolor produktu:	Black, White
Pojemność zbiornika na wodę:	25 l
Waga produktu:	- g
Poziom hałasu:	- dB
Licznik timera (maksymalny):	8 h