Instrukcja obsługi Honeywell 5805
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Honeywell 5805 (8 stron) w kategorii Kluis. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/8
Models 5805 / 5806
STEEL SECURITY SAFE
Read this manual carefully and never store it inside the safe!
1
Models 5805 / 5806
Steel Security Safe with Digital Lock
PACKAGE CONTENTS
1 – Steel Security Safe
1 – Operation Manual
2 – Override Access Keys
4 – “AA” Batteries
1 – Mounting Kit w/ Bolts
ATTENTION
DO NOT RETURN SAFE TO STORE!
For missing parts or difficulty operating your safe, please contact our Consumer Assistance
Department by telephone.
Store will not accept returned products without prior authorization. You must first contact our
consumer assistance department.
US/Canada 1- - - 877 354 5457 (Toll Free)
Mexico 01- - - 800 288 2872 After English voice recording stops you must then enter 800- -860 1677
to complete your call. (Toll Free)
Australia 0011 800 5325 7000 - - - (Toll Free)
Germany/New Zealand 00 800 5325 7000 - - - (Toll Free)
Other Countries XX*- - - 310 323 5722
- XX* Dial U.S. Country Code first (Toll Charges Apply)
PRODUCT OVERVIEW
A - LED Display panel
B - Safe Cabinet
C - Safe Door
D - Override Key Lock / Removable Cover
E Electronic Digital Keypad-
F - Safe Serial Number
G - -Bottom Panel Pre drilled Mounting Holes
H - -Rear Panel Pre drilled Mounting Holes
2
SETUP & OPERATION
STEP 1 . INSTALL BATTERIES
1. Use the override key to unlock and open the safe.
2. Pull the drawer forward and using a Phillips head screw driver,
remove battery cover located on the inside front panel.
3. Insert (4) “AA” batteries making sure they are installed properly with
regards to (+ - ) polarity. (See Diagram).
4. Replace the battery cover and small screw.
5. Do not close the drawer before testing the digital lock.
IMPORTANT NOTE: The batteries provided with the safe are for use during initial programming
and set-up only. They are not for long term use and should be replaced with (4) long lasting
Alkaline or Lithium batteries.
STEP 2 – - . TEST DIGITAL LOCK FACTORY DEFAULT CODE (159 LOCK)
LOCK SAFE
1. With the drawer open, enter the factory preset pass code: 1-5-9 and press the “LOCK” key.
2. The locking bolts should extend upwards into the locked position and the LED
will display “CLOSED”.
U NLOCK SAFE
1. Enter your new (3-6) digit personal pass code and press the “LOCK” key.
2. The motorized lock will retract the locking bolts into the unlock position and the LED read out
will display “OPENED”
3. Pull the drawer open using the recessed handle .located under the digital keypad
STEP 3 . LOCK and UNLOCK SAFE WITH NEW PASS CODE
LOCK SAFE
1. With the safe unlocked, close the drawer.
2. Enter a new personal pass code of your choice (3-6 digits) and press
the “LOCK” key.
3. The motorized lock will extend the locking bolts into the locked
position.
4. The LED will display “CLOSED” for 3 seconds followed by a read out
of the personal code just entered.
5. Make sure you keep a mental or written record of your new code.
UNLOCK SAFE
1. 6) digit personal Enter your new (3- pass code and press the “LOCK”
key.
2. The motorized lock will retract the locking bolts into the unlock
position and the LED read out will display “OPENED”
3. Pull the drawer open using the recessed handle located under the
digital keypad.
NOTE: The lock design allows for a new user code each time that the safe is locked
PRIVACY MODE
Normal operation will display your pass code on the LED Display as you enter it into the safe. If you
would like to keep your personal code private, press the “CLEAR” button prior to entering your
code. This will prevent the code from being displayed and must be repeated every time you enter
your code if you want to keep it private.
KEYPAD ALERT TONE
To verify entry of the pass code into memory using the keypad, a “Beep” will be heard after each
entry. This feature may be turned off by pressing the “CLEAR” button twice and reactivated by
repeating the process.
Specyfikacje produktu
| Marka: | Honeywell |
| Kategoria: | Kluis |
| Model: | 5805 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Honeywell 5805, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Kluis Honeywell
29 Września 2024
29 Września 2024
29 Września 2024
29 Września 2024
29 Września 2024
29 Września 2024
29 Września 2024
29 Września 2024
29 Września 2024
29 Września 2024
Instrukcje Kluis
- Kluis Thule
- Kluis Perel
- Kluis Juwel
- Kluis Master Lock
- Kluis Kidde
- Kluis First Alert
- Kluis Olympia
- Kluis Hama
- Kluis Yale
- Kluis SereneLife
- Kluis Workzone
- Kluis Avanti
- Kluis Burg Wächter
- Kluis Guzzanti
- Kluis Toolland
- Kluis Salvus
- Kluis Steren
- Kluis Royal Sovereign
- Kluis Phoenix
- Kluis Topcraft
- Kluis Varo
- Kluis CAWI
- Kluis Rottner
- Kluis Sentry
- Kluis Filex
- Kluis Kreator
- Kluis Handson
- Kluis Royal Safe
- Kluis Jewel
- Kluis Sistec
- Kluis SMC
- Kluis FireKing
- Kluis Rottner Tresor
- Kluis Olymp
- Kluis Protector
- Kluis Homak Security
- Kluis Technomax
Najnowsze instrukcje dla Kluis
27 Września 2024
27 Września 2024
26 Września 2024
26 Września 2024
26 Września 2024
26 Września 2024
24 Września 2024
23 Września 2024
22 Września 2024
22 Września 2024