Instrukcja obsługi Honda CBR650R (2019)
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Honda CBR650R (2019) (318 stron) w kategorii Silnik. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/318
Contents
Motorcycle Safety P. 2
Operation Guide P. 16
Maintenance P. 59
Troubleshooting P. 104
Information P. 125
Specifications P. 148
Index P. 152
2019 CBR650R/RA31MKNC00 MOM 16938 (1811)
Welcome
Congratulations on your purchase of a new
Honda motorcycle. Your selection of a
Honda makes you part of a worldwide family
of satisfied customers who appreciate
Honda's reputation for building quality into
every product.
To ensure your safety and riding pleasure:
●Read this owner's manual carefully.
●Follow all recommendations and
procedures contained in this manual.
●Pay close attention to safety messages
contained in this manual and on the
motorcycle.
To protect your investment, we urge you to
take responsibility for keeping your
motorcycle well serviced and maintained.
Also, observe the break-in guidelines, and
always perform the pre-ride inspection and
other periodic checks in this manual.
When service is required, remember that
your Honda dealer knows your motorcycle
best. If you have the required mechanical
“know-how” and tools, you can purchase an
official Honda Service Manual to help you
perform many maintenance and repair tasks.
2P. 142
Read the warranty information thoroughly so
that you understand the warranty coverage
and that you are aware of your rights and
responsibilities. P. 1432
You may also want to visit our website at
www.powersports.honda.com.
Canada
www.honda.ca.
Happy riding!
A Few Words About Safety
Your safety, and the safety of others, is very
important. Operating this motorcycle safely is
an important responsibility.
To help you make informed decisions about
safety, we have provided operating
procedures and other information on safety
labels and in this manual. This information
alerts you to potential hazards that could
hurt you or others.
Of course, it is not practical or possible to
warn you about all hazards associated with
operating or maintaining a motorcycle. You
must use your own good judgment.
You will find important safety information in a
variety of forms, including:
●Safety labels on the motorcycle
●
Safety Messages preceded by a safety alert
symbol and one of three signal words:
DANGER, WARNING, or CAUTION.
These signal words mean:
3DANGER
You WILL be KILLED or SERIOUSLY
HURT if you don’t follow instructions.
3WARNING
You CAN be KILLED or SERIOUSLY
HURT if you don’t follow instructions.
3CAUTION
You CAN be HURT if you don’t follow
instructions.
Other important information is
provided under the following titles:
NOTICE Information to help you avoid
damage to your motorcycle,
other property, or the
environment.
Safety Guidelines.................................................P. 3
Safety Labels.........................................................P. 6
Safety Precautions............................................... P. 8
Riding Precautions ..............................................P. 9
Accessories & Modifications........................... P. 14
Loading ................................................................P. 15
This section contains important information for safe riding of your motorcycle.
Please read this section carefully.
Motorcycle Safety
Safety Guidelines
Follow these guidelines to enhance your safety:
●Perform all routine and regular inspections
specified in this manual.
●Stop the engine and keep sparks and flame
away before filling the fuel tank.
●Do not run the engine in enclosed or partly
enclosed areas. Carbon monoxide in
exhaust gases is toxic and can kill you.
Always Wear a Helmet
It's a proven fact: helmets and protective
apparel significantly reduce the number and
severity of head and other injuries. So always
wear an approved motorcycle helmet and
protective apparel. P. 82
Before Riding
Make sure that you are physically fit, mentally
focused and free of alcohol and drugs. Check
that you and your passenger are both wearing
an approved motorcycle helmet and protective
apparel. Instruct your passenger on holding
onto the seat strap or your waist, leaning with
you in turns, and keeping their feet on the
footpegs, even when the motorcycle is stopped.
Take Time to Learn & Practice
Even if you have ridden other motorcycles,
practice riding in a safe area to become familiar
with how this motorcycle works and handles,
and to become accustomed to the motorcycle's
size and weight.
We recommend that all riders take a certified
course approved by the Motorcycle Safety
Foundation (MSF). New riders should start with
the basic course, and even experienced riders
will find the advanced course beneficial.
For information about the MSF training course
nearest you, call the national toll-free number:
(800) 446-9227.
USA
Other riding tips can be found in the You
and Your Motorcycle Riding Tips booklet that
came with your motorcycle.
Safety Guidelines
Motorcycle Safety
3
Continued
Ride Defensively
Always pay attention to other vehicles around
you, and do not assume that other drivers see
you. Be prepared to stop quickly or perform an
evasive maneuver.
Make Yourself Easy to See
Make yourself more visible, especially at night,
by wearing bright reflective clothing, positioning
yourself so other drivers can see you, signaling
before turning or changing lanes, and using
your horn when necessary.
Ride within Your Limits
Never ride beyond your personal abilities or
faster than conditions warrant. Fatigue and
inattention can impair your ability to use good
judgment and ride safely.
Don't Drink and Ride
Alcohol and riding don't mix. Even one alcoholic
drink can reduce your ability to respond to
changing conditions, and your reaction time
gets worse with every additional drink. Don't
drink and ride, and don't let your friends drink
and ride either.
Keep Your Honda in Safe Condition
It's important to keep your motorcycle properly
maintained and in safe riding condition.
Inspect your motorcycle before every ride and
perform all recommended maintenance. Never
exceed load limits ( P. 15), and do not modify2
your motorcycle or install accessories that
would make your motorcycle unsafe ( P. 14).2
If You are Involved in a Crash
Personal safety is your first priority. If you or
anyone else has been injured, take time to
assess the severity of the injuries and whether it
is safe to continue riding. Call for emergency
assistance if needed. Also follow applicable laws
and regulations if another person or vehicle is
involved in the crash.
Safety Guidelines
Motorcycle Safety
4
If you decide to continue riding, first turn the
ignition switch to the OFF position, and evaluate
the condition of your motorcycle. Inspect for
fluid leaks, check the tightness of critical nuts
and bolts, and check the handlebars , control
levers, brakes, and wheels. Ride slowly and
cautiously.
Your motorcycle may have suffered damage
that is not immediately apparent. Have your
motorcycle thoroughly checked at a qualified
service facility as soon as possible.
Carbon Monoxide Hazard
Exhaust contains poisonous carbon monoxide, a
colorless, odorless gas. Breathing carbon
monoxide can cause loss of consciousness and
may lead to death.
If you run the engine in confined or even partly
enclosed area, the air you breathe could
contain a dangerous amount of carbon
monoxide.
Never run your motorcycle inside a garage or
other enclosure.
3WARNING
Running the engine of your motorcycle
while in an enclosed or even partially
enclosed area can cause a rapid build-
up of toxic carbon monoxide gas.
Breathing this colorless, odorless gas
can quickly cause unconsciousness and
lead to death.
Only run your motorcycle's engine
when it is located in a well ventilated
area outdoors.
Safety Guidelines
Motorcycle Safety
5
Safety Labels
Safety and information labels on your
motorcycle provide important safety
information and may warn you of potential
hazards that could cause serious injury. Read
these labels carefully and don't remove them.
If a label comes off or becomes hard to read,
contact your dealer for a replacement.
Safety Labels
Motorcycle Safety
6
Safety Labels
Motorcycle Safety
7
Safety Precautions
●Ride cautiously and keep your hands on the
handlebars and feet on the footpegs.
●Keep passenger's hands onto the seat strap
or your waist, passenger's feet on the
footpegs while riding.
●Always consider the safety of your
passenger, as well as other drivers and
riders.
Protective Apparel
Make sure that you and any passenger are
wearing an approved motorcycle helmet, eye
protection, and high-visibility protective
clothing. Ride defensively in response to
weather and road conditions.
#
Helmet
Should be safety-standard certified, high-
visibility, and correct size for your head
●Must fit comfortably but securely, with the
chin strap fastened.
●Face shield with unobstructed field of vision
or other approved eye protection
USA
Look for a DOT (Department of
Transportation) certification label on any helmet
you buy.
3WARNING
Not wearing a helmet increases the
chance of serious injury or death in a
crash.
Make sure that you and any passenger
always wear an approved helmet and
protective apparel.
Safety Precautions
Motorcycle Safety
8
#
Gloves
Full-finger leather gloves with high abrasion
resistance
#
Boots or Riding Shoes
Sturdy boots with non-slip soles and ankle
protection
#
Jacket and Pants
Protective, highly visible, long-sleeved jacket
and durable long pants for riding (or a
protective suit)
Riding Precautions
Break-in Period
During the first 300 miles (500 km) of running,
follow these guidelines to ensure your
motorcycle's future reliability and performance.
●Avoid full-throttle starts and rapid
acceleration.
●Avoid hard braking and rapid down-shifts.
●Ride conservatively.
Brakes
Observe the following guidelines:
●Avoid excessively hard braking and
downshifting.
uSudden braking can reduce the
motorcycle's stability.
uWhere possible, reduce speed before
turning; otherwise you risk sliding out.
Riding Precautions
Motorcycle Safety
9
Continued
●Exercise caution on low traction surfaces.
uThe tires slip more easily on such
surfaces and braking distances are
longer.
●Avoid continuous braking.
uRepeated braking, such as when
descending long, steep slopes can
seriously overheat the brakes, reducing
their effectiveness. Use engine braking
with intermittent use of the brakes to
reduce speed.
●For full braking effectiveness, operate both
the front and rear brakes together.
#
Anti-lock Brake System (ABS)
CBR650RA only
This model is equipped with an Anti-lock Brake
System (ABS) designed to help prevent the
brakes from locking up during hard braking.
●ABS does not reduce braking distance. In
certain circumstances, ABS may result in a
longer stopping distance.
●ABS does not function at speeds below 6
mph (10 km/h).
●The brake lever and pedal may recoil slightly
when applying the brakes. This is normal.
●Always use the recommended front/rear
tires and sprockets to ensure correct ABS
operation.
Riding Precautions
Motorcycle Safety
10
#
Engine Braking
Engine braking helps slow your motorcycle
down when you release the throttle. For further
slowing action, downshift to a lower gear. Use
engine braking with intermittent use of the
brakes to reduce speed when descending long,
steep slopes.
#
Wet or Rainy Conditions
Road surfaces are slippery when wet, and wet
brakes further reduce braking efficiency.
Exercise extra caution when braking in wet
conditions.
If the brakes get wet, apply the brakes while
riding at low speed to help them dry.
Parking
●Park on a firm, level surface.
●If you must park on a slight incline or loose
surface, park so that the motorcycle cannot
move or fall over.
●Make sure that high-temperature parts
cannot come into contact with flammable
materials.
●Do not touch the engine, muffler, brakes
and other high-temperature parts until they
cool down.
●To reduce the likelihood of theft, always lock
the handlebars and remove the key when
leaving the motorcycle unattended.
Use of an anti-theft device is also
recommended.
Riding Precautions
Motorcycle Safety
11
Continued
#
Parking with the Side Stand
1.
Stop the engine.
2.
Push the side stand down.
3.
Slowly lean the motorcycle to the left until its
weight rests on the side stand.
4.
Turn the handlebars fully to the left.
uTurning the handlebars to the right
reduces stability and may cause the
motorcycle to fall.
5.
Turn the ignition switch to the LOCK
position and remove the key. P. 522
Refueling and Fuel Guidelines
Follow these guidelines to protect the engine,
fuel system and catalytic converter:
●Use only unleaded gasoline.
●Use recommended octane number. Using
lower octane gasoline will result in
decreased engine performance.
●Do not use fuels containing a high
concentration of alcohol. P. 1412
●Do not use stale or contaminated gasoline
or an oil/gasoline mixture.
●Avoid getting dirt or water in the fuel tank.
Riding Precautions
Motorcycle Safety
12
Honda selectable torque control
CBR650RA only
When the Honda selectable torque control
(Torque Control) detects rear wheel spin during
acceleration, the system will limit the amount of
torque applied to the rear wheel.
Torque Control does not work during
deceleration and will not prevent the rear wheel
from skidding due to engine braking. Do not
close the throttle suddenly, especially when
riding on slippery surfaces.
Torque Control may not compensate for rough
road conditions or rapid throttle operation.
Always consider road and weather conditions,
as well as your skills and condition, when
applying throttle.
If your motorcycle gets stuck in mud, snow or
sand, it may be easier to free it by turning off
the Torque Control temporarily.
Temporarily turning off Torque Control also
may help you maintain control and balance
when riding on off-road terrain.
Always use the recommended tires and
sprockets to ensure correct Torque Control
operation.
Riding Precautions
Motorcycle Safety
13
Accessories &
Modifications
We strongly advise that you do not add any
accessories that were not specifically designed
or approved for your motorcycle by Honda or
make modifications to your motorcycle from its
original design. Doing so can make it unsafe.
Modifying your motorcycle may also void your
warranty and make your motorcycle illegal to
operate on public roads. Before deciding to
install accessories on your motorcycle be certain
the modification is safe and legal.
3WARNING
Improper accessories or modifications
can cause a crash in which you can be
seriously hurt or killed.
Follow all instructions in this owner's
manual regarding accessories and
modifications.
Do not pull a trailer with, or attach a sidecar to,
your motorcycle. Your motorcycle was not
designed for these attachments, and their use
can seriously impair your motorcycle's handling.
Accessories & Modifications
Motorcycle Safety
14
Loading
●Carrying extra weight affects your
motorcycle's handling, braking and stability.
Always ride at a safe speed for the load you
are carrying.
●Avoid carrying an excessive load and keep
within specified load limits.
Maximum weight capacity P. 1482
●Tie all luggage securely, evenly balanced
and close to the center of the motorcycle.
●Do not place objects near the lights or the
muffler.
3WARNING
Overloading or improper loading can
cause a crash and you can be seriously
hurt or killed.
Follow all load limits and other loading
guidelines in this manual.
Loading
Motorcycle Safety
15
Parts Location
Operation Guide
16
Main fuse
(P.124)
Battery (P.80)
Front brake lever (P.102)
Throttle grip (P.100)
Coolant reserve tank
(P.87)
Rear brake fluid reservoir
(P.89)
Engine oil fill cap/dipstick
(P.83)
Brake light switch (P.91)
Front brake fluid reservoir
(P.89)
Fuse boxes
(P.123)
Rear brake pedal
Operation Guide
17
Clutch lever
(P.97)
Fuel fill cap
(P.56)
Document bag
(P.58)
Tool kit (P.57)
Rear suspension spring
preload adjuster (P.103)
Drive chain (P.93)
Side stand (P.92)
Shift lever
(P. 55)
Engine oil drain bolt
(P.85)
Rear seat (P.82)
Engine oil filter
(P.85)
Front seat (P.81)
Instruments
Operation Guide
18
Display Check
When the ignition switch is turned to the ON position, initial animation will show. If any
part of these displays does not come on when it should, have your dealer check for
problems.
SEL
button
SET
button
Operation Guide
19
Continued
Speedometer
Tachometer red zone
NOTICE
Do not operate the engine in the tachometer red zone.
Excessive engine speed can adversely affect engine life.
Tachometer
(excessive engine rpm range) To set the clock: (P.31)
Clock (12-hour or 24-hour display)
Section A display (P.21)
Section B display (P.25)
Operation Guide
20
Instruments (Continued)
When the coolant is over specified temperature, the
segment H flashes.
If the segment H flashes while riding: (P.106)
Coolant temperature gauge
Remaining fuel when only 1st (E)
segment starts flashing:
approximately 0.85 US gal (3.2 L)
Fuel gauge
If the fuel gauge indicator
flashes in a repeat pattern
or turns off: (P.110)
The gear position is shown in the
gear position indicator.
Gear position indicator
u“-” appears when the transmission
is not shifted properly.
If the coolant temperature gauge indicator
flashes: (P. 111)
When the 1st (E) segment of the fuel gauge starts flashing, the current fuel mileage, average fuel
mileage, fuel consumption, average speed or elapsed time switches to the reserve fuel consumption.
#
Section A display
You can select the following:
●Current fuel mileage
●Average fuel mileage [AVG]
●Fuel consumption
●Average speed [AVG]
●Elapsed time [TIME]
●Reserve fuel consumption [RES]
#
Changing the section A display
With the
SEL
button, you can switch the
section A display between the current fuel
mileage, average fuel mileage, fuel
consumption, average speed, elapsed time,
and reserve fuel consumption.
Operation Guide
21
Continued
When the 1st (E) segment of
the fuel gauge starts flashing
Current fuel
mileage
Average fuel
mileage
Fuel
consumption
Average
speed
Reserve fuel
consumption
Elapsed
time
#
Current fuel mileage
Displays the current instant fuel mileage.
Display range: 0.0 to 300.0 mile/gal (L/100
km or km/L)
•More than 300.0 mile/gal (L/100 km or
km/L): “300.0” is displayed.
•When your speed is less than 4 mph (6
km/h): “---.-” is displayed.
When “---.-” is displayed except for the
above-mentioned cases, go to your dealer
for service.
#
Average fuel mileage [AVG]
Displays the average fuel mileage since the
selected tripmeter was reset.
The average fuel mileage will be calculated
based on value displayed on the tripmeter (A
or B) selected.
Also, the average fuel mileage for tripmeter
A will be displayed when the odometer,
tripmeter A, numerical tachometer and
reserve tripmeter are selected.
Display range: 0.0 to 300.0 mile/gal (L/100
km or km/L)
•More than 300.0 mile/gal (L/100 km or
km/L): “300.0” is displayed.
•When the tripmeter A or B is reset: “---.-”
is displayed.
When “---.-” is displayed except for the
above-mentioned cases, go to your dealer
for service.
To reset the average fuel mileage:
(P.27)
Operation Guide
22
Instruments (Continued)
When “---” is displayed except for the above-
mentioned cases, go to your dealer for service.
To reset the average speed: (P. 27)
#
Elapsed time [TIME]
Displays the operating time since the
selected tripmeter was reset.
The elapsed time will be calculated based on
value displayed on the tripmeter (A or B)
selected.
Also, the elapsed time for tripmeter A will be
displayed when the odometer, tripmeter A,
numerical tachometer and reserve tripmeter
are selected.
Display range: 0:00 to 99:59 (hours:minutes)
●The elapsed time return to 0:00 when the
readout exceeds 99:59 .
To reset the elapsed time: (P.27)
#
Reserve fuel consumption [RES]
Displays the fuel consumption since the 1st
(E) segment of the fuel gauge starts flashing.
When the 1st (E) segment of the fuel gauge
starts flashing, the current fuel mileage,
average fuel mileage, fuel consumption,
average speed or elapsed time switches to
the reserve fuel consumption. You should
refill the tank as soon as possible.
●Flashes from “0.0” gal or L.
uWhen the amount of consumed fuel is
more than 0.42 US gal (1.6 L, 0.35 Imp
gal), the “RES” mark on the display blinks
faster.
After refueling more than the reserve
amount, the display returns to normal.
Operation Guide
24
Instruments (Continued)
When the 1st (E) segment of the fuel gauge starts flashing, the odometer, tripmeters or numerical
tachometer switches to the reserve tripmeter.
#
Section B display
You can select the following:
●Odometer [TOTAL]
●Tripmeter [TRIP A/B]
●Numerical tachometer
●Reserve tripmeter [RES]
#
Changing the section B display
With the
SET
button, you can switch the
section B display between the odometer,
tripmeter A, tripmeter B, numerical
tachometer, and reserve tripmeter.
Operation Guide
25
Continued
When the 1st (E) segment of
the fuel gauge starts flashing
Odometer Tripmeter A
Reserve
tripmeter
Numerical
tachometer
Tripmeter B
#
Odometer [TOTAL]
Total distance ridden.
When “------” is displayed, go to your dealer
for service.
#
Tripmeter [TRIP A/B]
Distance ridden since tripmeter was reset.
When “-----.-” is displayed, go to your dealer
for service.
To reset the tripmeter: (P. 27)
#
Numerical tachometer
Displays the engine revolutions per minutes
digit.
Display range: 0 to 15,000 r/min
●More than 15,000 r/min: “15,000” is
displayed.
#
Reserve tripmeter [RES]
Distance ridden since the 1st (E) segment of
the fuel gauge starts flashing.
When the 1st (E) segment of the fuel gauge
starts flashing, the odometer, tripmeters or
numerical tachometer switches to the reserve
tripmeter. You should refill the tank as soon
as possible.
When “----.-” is displayed, go to your dealer
for service.
After refueling more than the reserve
amount, the display returns to normal.
Operation Guide
26
Instruments (Continued)
#
To reset the tripmeter [TRIP A/B],
average fuel mileage [AVG], fuel
consumption, average speed [AVG]
and elapsed time
To reset the tripmeter A, average fuel mileage
A, fuel consumption A, average speed A and
and elapsed time A (these are based on
tripmeter A) together, press and hold the SET
button while tripmeter A is displayed.
When they are reset, reset display appears at
each indication. Then, the display returns to
the last selected indication.
Also, the tripmeter A, average fuel mileage,
fuel consumption, average speed and
elapsed time will be automatically reset by
refueling more than the reserve amount and
riding your motorcycle for 0.06 mile (0.1 km).
You can activate or deactivate the automatic
reset mode by refueling. (P.33)
Operation Guide
27
Continued
Tripmeter A
Fuel consumption A
Elapsed time A
Average speed A
Average fuel mileage A
Display Setting
Setting Mode A
Following items can be changed sequentially.
(P. 30)
• Time format setting
• Clock setting
• Backlight brightness adjustment
• Activating/deactivating of tripmeter A,
average fuel mileage, fuel consumption,
average speed and elapsed time
automatic reset mode
• Changing the speed and mileage unit
• Changing the fuel mileage meter unit
(only when km unit system is selected)
Setting Mode B
Following items can be changed sequentially.
(P. 35)
• Setting of REV indicator
-
RPM setting
-
Interval RPM setting
-
Brightness adjustment
• Changing of tachometer display mode
Operation Guide
29
Continued
1 Time format setting:
You can switch the time format between 12
hour format or 24 hour format.
aTurn the ignition switch to the ON position.
bPress and hold
SEL
and
SET
buttons until
the current time format start flashing.
cPress
SEL
button to select “12hr” or “24hr”.
dPress
SET
button. The time format is set,
and then the display moves to the clock
setting.
2 Clock setting:
aPress
SEL
button until the desired hour is
displayed.
uPress and hold
SEL
button to advance
the hour quickly.
bPress
SET
button. The minute digits start
flashing.
Operation Guide
31
Continued
cPress
SEL
button until the desired minute is
displayed.
uPress and hold
SEL
button to advance
the minute quickly.
dPress
SET
button. The clock is set, and then
the display moves to the backlight
brightness adjustment.
3 Backlight brightness adjustment:
You can adjust the brightness to one of five
levels.
aPress
SEL
button. The brightness level is
switched.
uYou can adjust the brightness level from
five levels.
bPress
SET
button. The backlight is set, and
then the display moves to the activating/
deactivating of tripmeter A, average fuel
mileage, fuel consumption, average speed
and elapsed time automatic reset mode.
Operation Guide
32
Instruments (Continued)
4 Activating/deactivating of tripmeter
A, average fuel mileage, fuel
consumption, average speed and
elapsed time automatic reset mode:
You can activate or deactivate the automatic
reset mode by refueling after the 1st (E)
segment of the fuel gauge starts flashing.
Initial setting is activation.
aPress
SEL
button to select “ ” (activate) or
“ ” (deactivate) in the automatic reset
mode.
bPress
SET
button. The activation/
deactivation of automatic reset mode is set,
and then the display moves to the changing
of speed and mileage unit.
5 Changing of speed and mileage unit:
aPress the
SEL
button to select either “mph”
and “mile” or “km/h” and “km” .
b
When the “km/h” for speed and “km” for
mileage are selected
Press the
SET
button. The speed and
mileage unit is set, and then the display
moves to the changing of fuel mileage
meter unit.
When the “mph” for speed and “mile” for
mileage are selected
Press
SET
button. The speed and mileage
unit is set, and then the display moves to
the ordinary display.
Operation Guide
33
Continued
6 Changing the fuel mileage meter unit:
aPress
SEL
button to select “L/100km” or
“km/L”.
bPress
SET
button. The fuel mileage meter
unit is set, and then the display moves to the
ordinary display.
Operation Guide
34
Instruments (Continued)
Setting Mode B
If the buttons are not pressed for about 30
seconds, the control is automatically switched
from the setting mode to the ordinary
display.
If the buttons are not pressed for about 30
seconds, items in the process of being set will
be discarded and only items that were set
and finalized will be applied. Only if the
ignition switch is turned to the OFF position,
items in the process of being set and those
that are finalized will be applied.
Operation Guide
35
Continued
Press and hold the
SEL
button and ignition
switch to the ON position until the initial
animation ends
Press the
SET
button
Ordinary display
Setting Mode B
Changing of tachometer display mode
Setting of REV indicator
Brightness adjustment
Interval RPM setting
RPM setting
1 Setting of REV indicator:
You can change the setting of the REV
indicator.
REV indicator blinks during setting.
aTo change the setting mode B, turn the
ignition switch to the ON position while
pressing
SEL
button until the initial
animation ends. The display moves to the
setting of "REV indicator blinking fastest
RPM". At the same time, the numerical
tachometer and the blinking bar segments
show the current settings of the "REV
indicator blinking fastest RPM".
uTachometer bar blinks only while setting
of REV indicator.
Operation Guide
36
Instruments (Continued)
SET
button
SEL
button
Tachometer REV indicator
Numerical
tachometer
bEach time
SEL
button is pressed, the "REV
indicator blinking fastest RPM" setting value
will be increased by one segment (250 r/min
(rpm)). When the "REV indicator blinking
fastest RPM" setting value exceeds 12,500
r/min (rpm), the "REV indicator blinking
fastest RPM" setting value automatically
returns to 5,000 r/min (rpm).
uPress and hold
SEL
button to advance
the "REV indicator blinking fastest RPM"
setting value quickly.
Available Setting Range
5,000 r/min (rpm) to 12,500 r/min (rpm)
Operation Guide
37
Continued
Numerical
tachometer
Tachometer
cPress
SET
button. The "REV indicator
blinking fastest RPM" is set, and then the
display moves to the setting of "REV
indicator blinking interval RPM". At the same
time, the numerical tachometer shows the
current "REV indicator blinking interval RPM"
and the blinking bar segment show the
current settings of the "REV indicator
blinking fastest RPM".
dEach time
SEL
button is pressed, the
numbers of the "REV indicator blinking
interval RPM" advances as following: 250
r/min (rpm), 500 r/min (rpm), 750 r/min
(rpm), 1,000 r/min (rpm) and 0 r/min (rpm).
Operation Guide
38
Instruments (Continued)
Tachometer
Numerical tachometer
Example: REV indicator blinking fastest
RPM: 12,500 r/min (rpm)
REV indicator blinking interval
RPM: 250 r/min (rpm)
REV indicator r/min (rpm)
Blinking 12,000 r/min (rpm)
Blinking fast 12,250 r/min (rpm)
Blinking fastest 12,500 r/min (rpm)
If the "REV indicator blinking interval RPM" is
0, the REV indicator blinks when reaching the
"REV indicator blinking fastest RPM" setting
value.
ePress
SET
button. The "REV indicator
blinking interval RPM" is set, and then the
display moves to the brightness adjustment
of the REV indicator.
The REV indicator switches from blinking
to lighting.
Operation Guide
39
Continued
fPress
SEL
button. The brightness level is
switched.
uYou can adjust the brightness level from
five levels.
gPress
SET
button. The brightness of the REV
indicator is set, and then the display moves
to the display setting of the tachometer.
2 Changing of tachometer display
mode:
You can change the display mode of the
tachometer.
aPress
SEL
button to switch the display
mode of tachometer.
bPress
SET
button. The currently selected
display mode is set, and then the display
moves to the ordinary display.
Operation Guide
40
Instruments (Continued)
Conventional display
Shows the engine RPM on the tachometer
bar segment.
Peak hold display
Shows the engine RPM on the tachometer
bar segment and peak hold segment.
Operation Guide
41
Continued
Conventional
display
Peak hold
segment
Peak hold
display
Tachometer
bar segment
The peak hold segment keeps to show the
maximum engine RPM temporarily.
Example: Engine revolutions per minutes
10,000 r/min (rpm)
Operation Guide
42
Instruments (Continued)
Conventional
display
Peak hold
segment
Peak hold
display
Tachometer
bar segment
Indicators
Operation Guide
44
If one of these indicators does not come on when it
should, have your dealer check for problems.
Right turn signal indicator Left turn signal indicator
Operation Guide
46
Indicators (Continued)
REV indicator (P. 48)
Operation Guide
47
Continued
Comes on briefly when the ignition switch is turned to the ON position with the
engine stop switch in the (Run) position.
If it comes on while engine is running: (P. 107)
PGM-FI (Programmed Fuel Injection) malfunction indicator lamp (MIL)
●Goes off when the engine starts.
●Comes on when the ignition switch is turned to the ON position.
If it comes on while engine is running: (P. 107)
Low oil pressure indicator
●Comes on briefly when the ignition switch is turned to the ON position.
●Goes off when your speed reaches approximately 6 mph (10 km/h).
ABS (Anti-lock Brake System) indicator
CBR650RA only
If it comes on while riding: (P. 108)
REV Indicator
• Comes on briefly when the ignition switch is turned to the ON position.
Initial setting
REV indicator blinking fastest RPM: 12,500 r/min (rpm)
REV indicator blinking interval RPM: 250 r/min (rpm)
REV indicator r/min (rpm)
Blinking 12,000 r/min (rpm)
Blinking fast 12,250 r/min (rpm)
Blinking fastest 12,500 r/min (rpm)
To set the shift up rev setting: (P. 36)
To set the shift width setting: (P.38)
Operation Guide
48
Indicators (Continued)
Operation Guide
49
BLANK PAGE
Switches
Operation Guide
50
Engine stop switch
Start button
uPressing the switch turns the
turn signal off.
uIn an emergency, switch to the
(Stop) position (the starter
motor will not operate) to stop
the engine.
Turn signal switch
Should normally remain in the
(Run) position.
Hazard switch
Horn button Switchable when the ignition
switch is in the ON position.
Headlight dimmer/Passing light control switch
• : High beam
• : Low beam
• : Flashes the high beam headlight.
Torque Control switch
CBR650RA only
Torque Control on/off. (P.53)
Steering Lock
Lock the steering when parking to help
prevent theft.
A U-shaped wheel lock or similar device is
also recommended.
#
Locking
aTurn the handlebars all the way to the left.
bPush the key down, and turn the ignition
switch to the LOCK position.
uJiggle the handlebars if the lock is
difficult to engage.
cRemove the key.
#
Unlocking
Insert the key, push it in, and turn the ignition
switch to the OFF position.
Operation Guide
52
Switches (Continued)
Push Turn
Ignition key
Specyfikacje produktu
| Marka: | Honda |
| Kategoria: | Silnik |
| Model: | CBR650R (2019) |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Honda CBR650R (2019), zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Silnik Honda
2 Lutego 2025
11 Stycznia 2025
8 Stycznia 2025
8 Stycznia 2025
2 Stycznia 2025
31 Grudnia 2025
31 Grudnia 2025
31 Grudnia 2025
28 Grudnia 2024
14 Grudnia 2024
Instrukcje Silnik
- Silnik Yamaha
- Silnik Triumph
- Silnik Kawasaki
- Silnik Milwaukee
- Silnik KTM
- Silnik Ducati
- Silnik BMW
- Silnik GasGas
- Silnik Suzuki
- Silnik Husqvarna
- Silnik Aprilia
- Silnik Mercedes-Benz
- Silnik Danfoss
- Silnik Texas
- Silnik ELAC
- Silnik Kettler
- Silnik Mitsubishi
- Silnik Indian
- Silnik Piaggio
- Silnik Reebok
- Silnik Juki
- Silnik Beta
- Silnik Bajaj
- Silnik Royal Enfield
- Silnik Sherco
- Silnik Hyosung
- Silnik Benelli
- Silnik Cagiva
- Silnik Metabo
- Silnik Nautilus
- Silnik Mash
- Silnik Hero
- Silnik Victory
- Silnik Emco
- Silnik Chang Jiang
- Silnik Harley Davidson
- Silnik Moto Guzzi
- Silnik Derbi
- Silnik SMC
- Silnik Ridley
- Silnik Anova
- Silnik Zero
- Silnik MV Agusta
- Silnik BodyCraft
- Silnik Mahindra
- Silnik CRRCpro
Najnowsze instrukcje dla Silnik
15 Stycznia 2025
12 Stycznia 2025
10 Stycznia 2025
3 Stycznia 2025
3 Stycznia 2025
31 Grudnia 2025
30 Grudnia 2025
30 Grudnia 2025
30 Grudnia 2025
30 Grudnia 2025