Instrukcja obsługi Home Easy HE-304

Home Easy Niesklasyfikowane HE-304

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Home Easy HE-304 (4 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/4
L N N
Ceiling Receiver Module: HE-304
Input: 230V ~ 50Hz
Max Load: 1000W 
(Resistive Load)
Frequency: 433.92MHz
Up to Six remote control units can be paired with each receiver module.
To program a receiver module, press and hold the "Learn" button for 3
seconds. The LED will start to flash, now press the selected "ON" button
on the remote control, the LED will stop flashing.
The units are now paired together place your selected electrical product
into the receiver socket, you can test this by pressing the selected
"ON/OFF" button.
To delete a remote control that has been paired with a HE-304 receiver
module, simply press the "Learn" button. The LED will start to blink; press the
"Off" button on the remote control, the LED will blink twice to confirm that the
remote control has been removed from the receiver sockets memory.
Warning: Never Exceed the Product Specification
C H Byron
34, Sherwood Rd
Aston Fields
Bromsgrove
B60 3DR
433MHz
R&TTE
APPROVED
CH Byron Electrical United Kingdom. www.chbyron.com
A
B
DK
FIN
F
D
GR
LT
IRL
I
L
NL
P
E
S
UK
BG
CZ
EST
H
IS
LV
M
N
SK
SLO
CH
PL
RO
0560
Tel: 0845 2301231
Fax: 01527 557701
Web: www.chbyron.com
E-mail:
support@chbyron.com
HE-304 1000W
Ceiling Module
V1.0
The HomeEasy automation range allows you to individually tailor your lighting
ambience, mood scenes and electrical products in your home or business at
the touch of a button. The system operates by sending wire free signals from
the remote control to the receiver units.
30 Metre Range
Remote On/Off setting
Max Load: 1000W Resistive load
INSTALLATION WARNINGS:
BEFORE COMMENCING INSTALLATION
ISOLATE YOUR MAINS ELECTRIC SUPPLY
Read the instructions care fully before starting the installation process and keep
them for future reference. If you are in any doubt on the installation process,
consult a qualified electrician.
This product should be installed in accordance with the relevant sections of
the building
regulations code, and the current edition of the IEE Wiring Regulations
(BS 7671:Requirements for electrical installations) and appropriate statutory
regulations.
As of1 April 2004, new installations in the UK should be wired using the EU
harmonised colours for the supply conductors:
New colours:
BROWN = Live  BLUE = Neutral Earth = Yellow/Green
Old colours:
RED = Live BLACK = Neutral
Electrical installations in bathrooms, kitchens, gardens, floor and heating systems,
swimming pools, saunas and extra-low voltage lighting are classed as special
installations and must be certified by an approved competent electrical contractor
conforming to Part P, requirements of BS 7671:2001 and appropriate statutory
regulations.
Do not install ceiling receivers on lighting circuits used to supply other
products such as extractor fans and shaver socket outlets.
Do not exceed the Maximum Power Rating of 300W, Incandescent lighting
only
The following lighting types will NOT work with the HE-304 Ceiling Modules:
G23, Metal Halide High Pressure sodium,
CLF, Linear/Compact Fluorescents,
SLE-PRO, PLE-C Pro,
Single Ended High Pressure Lamps
 
The HE-304 Ceiling Modules are compatible with the following lighting types:
G9, Strip & Architectural,  PAR30,
PAR36, SES (Candle/Round, PAR38,
PAR20, GLS BC, GLS ES,
GU10, SBC (Candle/Round), K1/9/11/12,
G4, G6.35, MR16,
  MR11
Product Compatability:
Product Specification:
Pairing/Deleting the Remote Control Socket:
Deleting Remote Control:
Ceiling Module Reset:
To delete all the remote control units from the memory of the receiver
module, hold the "Learn" button for more than 6 seconds, the LED will start to
blink continuously. Press the learn button again, the LED will blink twice to
confirm the deletion of all remote controls from the receiver memory.
Contact Details: HelpLine - 0845 2301231
HOME
easy
LNN
Fused: 5A
Indoor Use Only
Learn Button:
Learn LED:
Changing Fuse:
The HE-304 is fuse protected, to change a fuse:
1. Isolate the mains power supply from the ceiling module
2. Using a small screw driver, remove the fuse holder and replce the fuse with a
new 5A fuse.
3. Replace the fuse holder and reconnect the mains supply
Wiring Diagram: Low Voltage
When installing HE-304 Ceiling Modules in a existing lighting circuit,
conventional light switches should be disconnected and terminated as part of
the installation.
If your lighting circuits using ceiling roses, it is recommended that the current
wiring connections should be re-terminated using a suitable junction box.
Any existing switches currently controlling the light fitting should be
disconnected and suitably terminated.
The HomeEasy Ceiling Module is designed to be connected to the existing
permanently live lighting circuit between a convenient junction box and the
light fitting.
Any existing switches currently controlling the light fitting should be
disconnected and appropriately terminated.
Lighting circuits supplying Ceiling Receivers should always be protected by a 5
Amp rewire-able fuse or equivalent Miniature Circuit Breaker (MCB) located
within the Consumer Unit. Under no circumstances should any protection
devices with higher ratings be used.
** Ceiling Modules, are not designed to be used with loop-in/loop-out wiring, a
suitable junction box needs to be used if its necessary to connect the supply to
further fittings, the unit is designed for permanent installation.
The HE-304 Ceiling Modules are designed to be mounted inside a suitable
enclosed housing, which are dry and adequately ventilated (indoor use).
For outdoor use a suitable IP56 enclosure must be used. The ceiling receiver
module is designed to be maintenance free, but where possible access should
be available when needed.
Instalation Notes:
* All Earth conductors must be suitably sleeved with Green/Yellow
* Ensure that all bare conductor
ends are fully inserted into each
terminal, that all terminal
Standard Ceiling Rose Standard Ceiling Rose
240V Mains Ring
** Ceiling Module
Earth
Connection to
Standard Light Connection to
Standard Light
Sutiable Junction Box
Earth Sleaving Must Be Used
Neutral
Live
Earth
Wiring Diagram: Standard Installation
WARNING: Before installing the HomeEasy Ceiling Modules, isolate the circuit at the fuse/MCB board.
Connect the supply Live and Neutral conductors to the HomeEasy Receiver terminals marked L and N SUPPLY.
Connect the cable from the light fitting to theHomeEasy Receiver terminals marked L(Load) and N(Neutral).
For earth continuity the supply and load Earth conductors must be terminated externally using a sutiably insulated terminal block.
Standard Ceiling Standard Ceiling
240V Mains Ring
** Ceiling Module
Earth Connection
Connection to
Low Voltage Light Fitting
Sutiable Junction Box
Earth Sleaving Must Be Used
Neutral
Live
Earth
Manufacturer
Specified
Transformer
Manufacturer
Specified
Transformer
* All Earth conductors must be suitably sleeved with Green/Yellow
If in any doubt consult a qualified Electrician
L N N
L N N Neutral
Neutral
Load Live
Live
L N N
L N N Neutral
Neutral
Load Live
Live
Connection to
Low Voltage Light Fitting

Specyfikacje produktu

Marka: Home Easy
Kategoria: Niesklasyfikowane
Model: HE-304

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Home Easy HE-304, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Niesklasyfikowane Home Easy

Home Easy

Home Easy HE-220 Instrukcja

23 Sierpnia 2024
Home Easy

Home Easy HE-304 Instrukcja

19 Sierpnia 2024
Home Easy

Home Easy HE-420 Instrukcja

14 Sierpnia 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Black Diamond

Black Diamond BD1121530000ALL1 Instrukcja

15 Października 2024
Husqvarna

Husqvarna K 970 SmartGuard Instrukcja

15 Października 2024
Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024