Instrukcja obs艂ugi Hisense RR130DAGS

Hisense lod贸wka RR130DAGS

Przeczytaj poni偶ej 馃摉 instrukcj臋 obs艂ugi w j臋zyku polskim dla Hisense RR130DAGS (18 stron) w kategorii lod贸wka. Ta instrukcja by艂a pomocna dla 16 os贸b i zosta艂a oceniona przez 2 u偶ytkownik贸w na 艣rednio 4.5 gwiazdek

Strona 1/18
1
NOTE: This figure is only a sketch of the refrigerator, the actual
product may differ from it.
WARNING :
Keep ventilation openings, in the applianceenclosure or in the built-in
structure, clear of obstruction.
Do not use mechanical devices or other means toaccelerate the
defrosting process.
Do not use electrical appliances inside the food storage compartments
of the appliance.
1
2
3
4
5
6
7
8
9
10
Ice Cube Tray
Freezer Compartment
Drip Tray
Removable shelve
Glass panel
Crisper
Levelling Legs
Bottle Racks
Temperature Control Knob
Recessed Handle
11
1
2
3
4
5
6
7
8
9
10
11
12
Light
12
2
Well Ventilating
Power Supply
Power Line Cord
There is need of good ventilation around the refrigerator for easy dissipation of heat, high
efficiency of refrigeration and low power consumption.
For this purpose, sufficient clear space should be needed around the refrigerator, its back
is at least 100mm away from the wall, its sides at least have a space of 200mm separately
and the height from over its top is not less than 300mm.
A clear space should be left to open its doors to 160 .
The refrigerator is only applied with power supply of single phase alternating current
(See the rating label) .
If fluctuation of voltage in the district user is of so large that the voltage exceeds the scope,
for safety sake, be sure to apply A.C. automatic voltage regulator to the refrigerator.
The refrigerator must employ a special power socket instead of common one other electric
appliances. Its plug must match the socket with ground wire.
The cord should be neither lengthened nor folded into coil during operation. Moreover,
it is forbidden that cord is kept close onto the compressor at the back of the refrigerator,
the surface temperature of which is quite high when operating. Touching with it would
deactivate the insulation or cause leakage for electricity.
Extension cord is not recommended to use.
WARNING:
If the power cord is damaged ,it must be replaced by the manufacturer or its service
agent or a similarly qualified person in order to avoid a hazard.
The appliance must be positioned so that the plug is accessible.
Protection from Moisture
Avoiding placing the refrigerator in a place where heavy moisture is present so as to
minimize possibility of rusty for its metal parts. Still more, the refrigerator is forbidden to
be directly sprayed by water, otherwise, poor insulation and current leakage would occur.
Protection from Heat
The refrigerator should be far away from any heat source or direct sunshine.
Fixing Stable
Floor on which refrigerator will be placed must be flat and solid. It should not be laid on
any soft material such as foam plastic, etc. If the refrigerator is not on the same level,
adjust the screws suitably. The refrigerator should not be placed near anything which
may echo.


Specyfikacje produktu

Marka: Hisense
Kategoria: lod贸wka
Model: RR130DAGS

Potrzebujesz pomocy?

Je艣li potrzebujesz pomocy z Hisense RR130DAGS, zadaj pytanie poni偶ej, a inni u偶ytkownicy Ci odpowiedz膮




Instrukcje lod贸wka Hisense

Instrukcje lod贸wka

Najnowsze instrukcje dla lod贸wka