Instrukcja obsługi Hisense HWFY1014

Hisense pralka HWFY1014

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Hisense HWFY1014 (7 stron) w kategorii pralka. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/7
3
ensure
Important: Transport bolts which are not removed can cause damage to
the appliance.
Screw off all transportation bolts for approx. 30mm with wrench following the
direction of arrow shown (not fully screw it off).
Push four transportation bolts on horizontal direction inward and loose
transportation bolt.
30
2. Remove transport bolts
Double sided tape
Right-angle impression
Before installing the noise-reduction bottom
plate, align and paste the acoustic absorption
wool with and along the right-angle impression
on bottom plate (this procedure is unnecessary
for some of the models without acoustic
absorption wool).
Remove surface paper on
double sided tape at four sides
of the bottom plate.
Incline the machine to an angle of 40° and let
the side with right-angle notch face towards
front of the washing machine, as shown in the
figure. Insert the side with oblique-angle notch
between two foot screws at back of the
washing machine completely in place. Then,
install the bottom plate and ensure that it
contacts with bottom of the washing machine
closely.
Press the double sided tape
on four sides manually to
secure the noise-reduction
palte to the machine body
firmly.
B:
If the water inlet hose is not already installed, it must be screwed to the
appliance.The blue marked hose is only for cold water. Depending on the model,
the hot water hose marked with red should also be connected, for models having
dual inlets.
5 Connect the water supply inlet hose.
Pump
6


Specyfikacje produktu

Marka: Hisense
Kategoria: pralka
Model: HWFY1014

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Hisense HWFY1014, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje pralka Hisense

Instrukcje pralka

Najnowsze instrukcje dla pralka