Instrukcja obsługi Hikvision DS-2TX3742-35A

Hikvision Kamera monitorująca DS-2TX3742-35A

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Hikvision DS-2TX3742-35A (51 stron) w kategorii Kamera monitorująca. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/51
User Manual of Thermal Smart Linkage Tracking System
0
Thermal Smart Linkage Tracking System
User Manual
User Manual of Thermal Smart Linkage Tracking System
i
© 2021 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved.
About this Manual
The Manual includes instrucons for using and managing the Product. Pictures, charts, images and all
other informaon hereinaer are for descripon and explanation only. The informaon contained in
the Manual is subject to change, without noce, due to rmware updates or other reasons. Please
nd the latest version of this Manual at the Hikvision website ( ). hp://www.hikvision.com/
Please use this Manual with the guidance and assistance of professionals trained in supporng the
Product.
Trademarks Acknowledgement
and other Hikvision’s trademarks and logos are the properes of Hikvision in various
jurisdicons.
Other trademarks and logos menoned are the properes of their respecve owners.
LEGAL DISCLAIMER
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT
DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED “AS IS” AND “WITH ALL
FAULTS AND ERRORS”. HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR
PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE
LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING,
AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF
DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF
CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION
WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES OR LOSS.
YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT SECURITY RISKS,
AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY
LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS INFECTION,
OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL
SUPPORT IF REQUIRED.
YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY
RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU
ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS
OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY
RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR
ANY PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS
DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY
ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE,
OR IN SUPPORT OF HUMAN RIGHTS ABUSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER
PREVAILS.
User Manual of Thermal Smart Linkage Tracking System
ii
Regulatory Informaon
FCC Informaon
Please take attenon that changes or modicaon not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
FCC compliance: This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protecon against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instrucon manual, may cause harmful interference to radio
communicaons. Operaon of this equipment in a residenal area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.
FCC Condions
This device complies with part 15 of the FCC Rules. Operaon is subject to the following two
condions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired
operaon.
EU Conformity Statement
This product and - if applicable - the supplied accessories too are marked with "CE"
and comply therefore with the applicable harmonized European standards listed
under the Low Voltage Direcve 2006/95/EC, the EMC Direcve 2014/30/EU, the
RoHS Direcve 2011/65/EU.
2012/19/EU (WEEE direcve): Products marked with this symbol cannot be disposed
of as unsorted municipal waste in the European Union. For proper recycling, return
this product to your local supplier upon the purchase of equivalent new equipment,
or dispose of it at designated collecon points. For more informaon see:
www.recyclethis.info.
2006/66/EC (baery direcve): This product contains a baery that cannot be
disposed of as unsorted municipal waste in the European Union. See the product
documentaon for specic baery informaon. The baery is marked with this
symbol, which may include leering to indicate cadmium (Cd), lead (Pb), or mercury
(Hg). For proper recycling, return the baery to your supplier or to a designated collecon point. For
more informaon see: www.recyclethis.info.
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (A)/NMB-3(A) standards requirements.
이 기기는 업무용 환경에서 사용할 목적으로 적합성평가를 받은 기기로서 가정용 환경에서
사용하는 경우 전파간섭의 우려가 있습니다 .
User Manual of Thermal Smart Linkage Tracking System
iii
Symbol Convenon
The symbols that may be found in this document are dened as follows.
Symbol
Descripon
Provides addional informaon to emphasize or supplement
important points of the main text.
Indicates a potenally hazardous situaon, which if not avoided,
could result in equipment damage, data loss, performance
degradaon, or unexpected results.
Indicates a hazard with a high level of risk, which if not avoided, will
result in death or serious injury.
Safety Instrucon
These instrucons are intended to ensure that user can use the product correctly to avoid danger or
property loss.
Laws and Regulaons
● The lightning protecon and grounding design of outdoor installaon and wiring should be in
compliance with the lightning protecon requirements of the buildings and local laws and
regulaons.
● Use of the product must be in strict compliance with the local electrical safety regulaons.
Storage
● Store the device in dry, well-venlated, corrosive-gas-free, no direct sunlight, and no heang
source environment. Neglect may cause re hazard.
● To avoid heat accumulaon, good venlaon is required for a proper operang environment.
● DO NOT touch the heat dissipaon component to avoid burns.
Transportaon
● Keep the device in original or similar packaging while transporng it.
● Keep all wrappers aer unpacking them for future use. In case of any failure occurred, you need
to return the device to the factory with the original wrapper. Transportaon without the original
wrapper may result in damage on the device and the company shall not take any responsibilies.
● DO NOT drop the product or subject it to physical shock. Keep the device away from magnetic
interference.
Installaon
● When the device is mounted on wall or ceiling, the device shall be rmly xed.
● Avoid equipment installaon on vibratory surface or places subject to shock (neglect may cause
equipment damage).
Power Supply
● Make sure that the power has been disconnected before you wire, install, or disassemble the
device.
● The input voltage should conform to IEC60950-1 standard: SELV (Safety Extra Low Voltage) and
the Limited Power Source. Refer to the appropriate documentaon for detailed informaon. The
standard power supply is 12 VDC, or 24 VAC, please make sure your power supply matches with
your camera.
User Manual of Thermal Smart Linkage Tracking System
iv
● Use the power adapter provided by qualied manufacturer. Refer to the product specicaon for
detailed power requirements. It is recommended to provide independent power adapter for
each device as adapter overload may cause over-heang or a re hazard.
Baery
● DO NOT place the battery near heang or re source. Avoid direct sunlight.
● Improper use or replacement of the baery may result in explosion hazard. Replace with the
same or equivalent type only. Dispose of used baeries according to the instrucons provided by
the baery manufacturer.
● For long-term storage of the battery, make sure it is fully charged every half year to ensure the
baery quality. Otherwise, damage may occur.
System Security
● You acknowledge that the nature of Internet provides for inherent security risks, and our
company shall not take any responsibilies for abnormal operaon, privacy leakage or other
damages resulng from cyber aack, hacker aack, however, our company will provide mely
technical support if required.
● Please enforce the protecon for the personal informaon and the data security as the device
may be confronted with the network security problems when it is connected to the Internet.
Please contact us when the device might exist network security risks.
● Please understand that you have the responsibility to congure all the passwords and other
security sengs about the device, and keep your user name and password.
Maintenance
● Clean the lens with so and dry cloth or wiping paper to avoid scratching it.
● If the product does not work properly, please contact your dealer or the nearest service center.
We shall not assume any responsibility for problems caused by unauthorized repair or
maintenance.
● A few device components (e.g., electrolyc capacitor) require regular replacement. The average
lifespan varies, so periodic checking is recommended. Contact your dealer for details.
Using Environment
● DO NOT expose the device to extremely hot, cold, dusty, corrosive, saline-alkali, or damp
environments. Make sure the running environment meets the requirement of the device.
● DO NOT aim the lens the sun or any other bright light.at
● Keep the camera away from liquid while in use.
Emergency
● If smoke, odor, or noise arises from the device, immediately turn o the power, unplug the
power cable, and contact the service center.
COMPLIANCE NOTICE: The thermal series products might be subject to export controls in various countries or
regions, including without limitaon, the United States, European Union, United Kingdom and/or other member
countries of the Wassenaar Arrangement. Please consult your professional legal or compliance expert or local
government authories for any necessary export license requirements if you intend to transfer, export, re-export
the thermal series products between dierent countries.
User Manual of Thermal Smart Linkage Tracking System
2
Label Display
The on-screen label of the preset tle, azimuth/elevaon, zoom, me and speed
dome name can be displayed on the monitor. The displays of me and speed dome
name can be programmed.
Auto Flips
In manual tracking mode, when a target object goes directly beneath the speed
dome, the video will automacally flips 180 degrees in horizontal direcon to
maintain connuity of tracking. This funcon can also be realized by auto mirror
image depending on different camera models.
Privacy Mask
This funcon allows you to block or mask certain area of a scene, for prevenng the
personal privacy from recording or live viewing. A masked area will move with pan
and lt funcons and automacally adjust in size as the lens zooms telephoto and
wide.
3D Posioning
In the client soware, use the left key of mouse to click on the desired posion in the
video image and drag a rectangle area in the lower right direcon, then the speed
dome will move the posion to the center and allow the rectangle area to zoom in.
Use the le key of mouse to drag a rectangle area in the upper le direcon to move
the posion to the center and allow the rectangle area to zoom out.
Proporonal Pan/Tilt
Proporonal pan/lt automacally reduces or increases the pan and lt speeds
according to the amount of zoom. At telephoto zoom sengs, the pan and lt
speeds will be slower than at wide zoom sengs. This keeps the image from moving
too fast on the live view image when there is a large amount of zoom.
Auto Focus
The auto focus enables the camera to focus automacally to maintain clear video
images.
Day/Night Auto Switch
The speed domes deliver color images during the day. And as light diminishes at
night, the speed domes switch to night mode and deliver black and white images
with high quality.
Slow Shuer
In slow shuer mode, the shutter speed will automacally slow down in low
illuminaon condions to maintain clear video images by extending the exposure
me. The feature can be enabled or disabled.
Backlight Compensaon (BLC)
If you focus on an object against strong backlight, the object will be too dark to be
seen clearly. The BLC (Backlight Compensaon) funcon can compensate light to the
object in the front to make it clear, but this causes the over-exposure of the
background where the light is strong.
Wide Dynamic Range (WDR)
The wide dynamic range (WDR) funcon helps the camera provide clear images even
under back light circumstances. When there are both very bright and very dark areas
simultaneously in the eld of view, WDR balances the brightness level of the whole
image and provide clear images with details.
White Balance (WB)
White balance can remove the unrealisc color casts. White balance is the white
rendion funcon of the camera to adjust the color temperature according to the
environment automacally.
Patrol
A patrol is a memorized series of pre-dened preset funcon. The scanning speed
between two presets and the dwell me at the preset are programmable.
Paern
A paern is a memorized series of pan, lt, zoom, and preset funcons. By default
the focus and iris are in auto status during the paern is being memorized.
User Manual of Thermal Smart Linkage Tracking System
3
Power O Memory
The speed dome supports the power off memory capability with the predened
resume me. It allows the speed dome to resume its previous posion aer power is
restored.
Scheduled Task
A scheduled task is a precongured acon that can be performed automacally at a
specic date and me. The programmable acons include: auto scan, random scan,
patrol 1-8 ,pattern 1- preset 1-8,frame scan, panorama scan, lt scan, day, night, 4,
reboot, PT adjust, Aux Output, etc.
Park Acon
This feature allows the speed dome to start a predened acon automacally aer a
period of inacvity.
3D Digital Noise Reducon
Comparing with the general 2D digital noise reducon, the 3D digital noise reducon
funcon processes the noise between two frames besides processing the noise in
one frame. The noise will be much less and the video will be clearer.
User Manual of Thermal Smart Linkage Tracking System
4
Chapter 2 Appearance Descripon
There are two kinds of Thermal and Opcal Smart Linkage Tracking Systems: Type I
speed dome, and Type II speed dome. The appearance descripons are shown
below.
2.1 Type I Smart Linkage System Appearance
Refer to the following gures for Type I Smart Linkage Tracking Systems overview.
Figure 2-1 Type I Thermal Smart Linkage Tracking System Overview
Network
Interface
Video
Interface
Alarm In/Out
Audio In/Out
RS-485
Audio In/Out
Alarm In/Out
Power
Cable Video
Interface
Network
Interface
Power
Outlet
Figure 2-2 Type I Thermal Smart Linkage Tracking System Cables
User Manual of Thermal Smart Linkage Tracking System
7
Chapter 3 Installation
3.1 Pre-Installaon
● Make sure the device in the package is in good condion and all the assembly
parts are included.
● The standard power supply is 24V AC, please make sure your power supply
matches your camera.
● Make sure all the related equipment is power-o during the installaon.
● Check the specicaon for the installaon environment.
● Make sure that the wall is strong enough to withstand eight mes the weight
of the camera and the bracket.
For the camera that supports IR, mind the following precauons to prevent IR
reecon:
● Do NOT remove the protecve lm unl you nish the installaon. For any
dust or grease on the cover, clean them with clean so cloth and isopropyl
alcohol.
● Make sure that there is no reecve surface too close to the camera lens. The
IR light from the camera may reect back into the lens causing reecon.
● Do NOT drag the camera with its waterproof cables, or the waterproof
performance is aected.
DO NOT lift the
camera by
lifting the cables
Figure 3-1 Do NOT Li by Cables
3.1.1 Wide Range Coverage
For xed lens camera, the auto-focus funcon, and remote manual focus funcon are
not supported.
Select the proper installaon site, and proper lens focal length according to the Wide
Range Coverage list below:
User Manual of Thermal Smart Linkage Tracking System
9
Figure 3-3 Insert the Micro CardSD
3. Use the screwdriver to cover the micro card slot.SD
Speed Dome Memory Card Installation
Steps:
1. Remove the protecve scker.
Figure 3-4 Open the Memory Card Slot
2. Use the screw driver to remove the memory card slot cover on the back of the
speed dome.
Memory Card
Slot Cover
Figure 3-5 Memory Card Slot
3. Insert the Micro card into the memory card slot and make sure the chip faces SD
toward the lens. When it clicks, the card is properly installed.
User Manual of Thermal Smart Linkage Tracking System
10
MicroSD Card
Figure 3-6 Insert the Micro CardSD
4. Use the screwdriver to cover the memory card slot.
3.2 Bracket Installaon
The speed dome can be installed to a thread interface or non-thread interface
bracket. The non-thread bracket is highly recommended.
When you select a thread bracket, please install the pendent adapter (supplied)
between the bracket and speed dome. Any mismatch problems shall be taken
responsibility by the user.
The dimension of pendant adapter is G1 1
2 .
For cement wall, you need to use the expansion screw to fix the bracket.
For wooden wall, you can just use the self-tapping screw to fix the bracket.
Please make sure that the wall is strong enough to withstand at least 8 times the
weight of the dome and the bracket.
The wall must be thick enough to mount the expansion screws.
3.2.1 Wall Mounng
Steps:
1. Get the bracket and screws from the packing box.
2. Drill 4 φ12 screw holes in the wall according to the screw hole sites of the bracket,
and then insert M8 expansion screws into the screw holes.

Specyfikacje produktu

Marka: Hikvision
Kategoria: Kamera monitorująca
Model: DS-2TX3742-35A

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Hikvision DS-2TX3742-35A, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Kamera monitorująca Hikvision

Hikvision

Hikvision DS-2CE59U1T-AVPIT3ZF Instrukcja

12 Stycznia 2025
Hikvision

Hikvision IDS-2CD7526G0-IZHSY Instrukcja

12 Stycznia 2025
Hikvision

Hikvision DS-2CD2163G0-I(S) Instrukcja

12 Stycznia 2025
Hikvision

Hikvision DS-2CD2H83G1-IZS Instrukcja

12 Stycznia 2025
Hikvision

Hikvision DS-2CE16H0T-IT1E Instrukcja

11 Stycznia 2025
Hikvision

Hikvision THC-T127-PTLTS Instrukcja

7 Stycznia 2025
Hikvision

Hikvision DS-2CE16U0T-LF Instrukcja

19 Grudnia 2024
Hikvision

Hikvision DS-2CE10KF3T-LSYE Instrukcja

19 Grudnia 2024
Hikvision

Hikvision DS-2CE10KF3T-LS Instrukcja

19 Grudnia 2024
Hikvision

Hikvision DS-2CE76U0T-LMF Instrukcja

19 Grudnia 2024

Instrukcje Kamera monitorująca

Najnowsze instrukcje dla Kamera monitorująca

Technaxx

Technaxx TX-192 Instrukcja

28 Stycznia 2025
Wisenet

Wisenet XNV-8080R Instrukcja

25 Stycznia 2025
Dahua Technology

Dahua Technology Pro IPC-HDPW5442G-Z Instrukcja

15 Stycznia 2025
Toshiba

Toshiba IKS-WR7412 Instrukcja

13 Stycznia 2025
AVerMedia

AVerMedia FC1320-P Instrukcja

13 Stycznia 2025
Digitus

Digitus OptiMax DN-16037 Instrukcja

13 Stycznia 2025
Speco Technologies

Speco Technologies O5LB1 Instrukcja

12 Stycznia 2025
ZKTeco

ZKTeco AntarVis 2.0 Instrukcja

12 Stycznia 2025
Speco Technologies

Speco Technologies O2P30X Instrukcja

12 Stycznia 2025
Kguard

Kguard QRT-501 Instrukcja

11 Stycznia 2025