Instrukcja obsługi Hikvision DS-2CE76H0T-ITMFS

Hikvision Kamera monitorująca DS-2CE76H0T-ITMFS

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Hikvision DS-2CE76H0T-ITMFS (13 stron) w kategorii Kamera monitorująca. Ta instrukcja była pomocna dla 10 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/13
H0T Series Audio Turret Camera
User Manual
User Manual
Thank you for purchasing our product. If there are any
questions, or requests, do not hesitate to contact the
dealer.
This manual applies to the models below:
Type
Model
Type I
DS- -2CE78H0T IT3FS
Type II
DS- -2CE76H0T ITPFS
Type III
DS- -2CE76H0T ITMFS
This manual may contain several technical mistakes or
prinng errors, and the content is subject to change
without notice. The updates will be added to the new
version of this manual. We will readily improve or
update the products or procedures described in the
manual.
0107001090428
Regulatory Informaon
FCC Informaon
Please take attenon that changes or modicaon not
expressly approved by the party responsible for
compliance could void the users authority to operate
the equipment.
FCC compliance: This equipment has been tested and
found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protecon
against harmful interference when the equipment is
operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the
instrucon manual, may cause harmful interference to
radio communicaons. Operaon of this equipment in a
residenal area is likely to cause harmful interference in
which case the user will be required to correct the
interference at his own expense.
FCC Condions
This device complies with part 15 of the FCC Rules.
Operaon is subject to the following two condions:
1. This device may not cause harmful interference.
2. This device must accept any interference received,
including interference that may cause undesired
operaon.
EU Conformity Statement
This product and if applicable the - -
supplied accessories too are marked with
"CE" and comply therefore with the
applicable harmonized European
standards listed under the Low Voltage Direcve
20 /35/EU, the EMC Direcve 201 30/EU,14 4/ the RoHS
Direcve 2011/65/EU.
20 2/1 19/EU (WEEE directive): Products
marked with this symbol cannot be
disposed of as unsorted municipal waste in
the European Union. For proper recycling,
return this product to your local supplier
upon the purchase of equivalent new
equipment, or dispose of it at designated collecon
points. For more informaon see: www.recyclethis.info.
2006/66/EC (baery direcve): This product contains a
battery that cannot be disposed of as
unsorted municipal waste in the European
Union. See the product documentaon for
specic baery informaon. The baery is
marked with this symbol, which may
include leering to indicate cadmium (Cd), lead (Pb), or
mercury (Hg). For proper recycling, return the baery
to your supplier or to a designated collecon point. For
more informaon, see: www.recyclethis.info.
Industry Canada ICES 003 Compliance-
This device meets the CAN ICES 3 (A)/NMB 3(A) - -
standards requirements.
Warning
This is a class A product. In a domesc environment this
product may cause radio interference in which case the
user may be required to take adequate measures.
Safety Instrucon
These instrucons are intended to ensure that user can
use the product correctly to avoid danger or property
loss.
The precauon measure is divided into “Warnings” and
“Cauons”.
Warnings: Serious injury or death may occur if any of
the warnings are neglected.
Cauons: Injury or equipment damage may occur if any
of the cauons are neglected.
Warnings
In the use of the device, you must be in strict
compliance with the electrical safety regulaons of
the naon and region.
Input voltage should meet both the SELV (Safety Extra
Low Voltage) and the Limited Power Source with 12
VDC according to the IEC60950 1 standard. Refer to -
technical specicaons for detailed informaon.
Do not connect mulple devices to one power
adapter to avoid over heang or a re hazard caused -
by overload.
Make sure that the plug is rmly connected to the
power socket.
Make sure that the device is rmly fixed if wall
mounng or ceiling mounng is adopted.
If smoke, odor or noise rise from the device, turn off
the power at once and unplug the power cord, and
then contact the service center.
Never attempt to disassemble the camera by
unprofessional personal.
Cauons
Do not drop the camera or subject it to physical
shock.
Do not touch senor modules with ngers.
Do not place the camera in extremely hot, cold (the
operang temperature shall be °C to 60°C), dusty -40
or damp locaons, and do not expose it to high
electromagnetic radiation.
If cleaning is necessary, use clean cloth with a bit of
ethanol and wipe it gently.
Do not aim the camera at the sun or extra bright
places.
The sensor may be burned out by a laser beam, so
when any laser equipment is in using, make sure that
the surface of sensor will not be exposed to the laser
beam.
Do not expose the device to high electromagnec
radiaon or extremely hot, cold, dusty or damp
environment.
To avoid heat accumulation, good ventilaon is
required for the operang environment.
Warnings Follow
these safeguards to
prevent serious injury
or death.
Cauons Follow these
precauons to prevent
potenal injury or
material damage.


Specyfikacje produktu

Marka: Hikvision
Kategoria: Kamera monitorująca
Model: DS-2CE76H0T-ITMFS
Kolor produktu: Czarny
Typ produktu: Router biurkowy
Rodzaj zasilania: DC
Częstotliwość wejściowa AC: 50/60 Hz
Napięcie wejściowe AC: 100 - 240 V
Wysokość produktu: 150 mm
Szerokość produktu: 210 mm
Głębokość produktu: 30.75 mm
Waga produktu: 277.4 g
Podręcznik użytkownika: Tak
Port USB: Tak
Gniazdko wyjścia DC: Tak
Zasilacz sieciowy: Tak
Standardy komunikacyjne: IEEE 802.11ac,IEEE 802.11b,IEEE 802.11g,IEEE 802.11n,IEEE 802.1p,IEEE 802.3,IEEE 802.3az,IEEE 802.3u,IEEE 802.3x
Prędkość transferu danych przez Ethernet LAN: 10,100,1000 Mbit/s
Ilość portów Ethernet LAN (RJ-45): 4
Napięcie operacyjne: 12 V
Zakres temperatur (eksploatacja): 0 - 45 °C
Zakres wilgotności względnej: 10 - 95 %
Zarządzanie przez stronę www: Tak
Standardy Wi- Fi: 802.11b,802.11g,Wi-Fi 4 (802.11n),Wi-Fi 5 (802.11ac)
Generacja sieci mobilnej: 4G
Kod zharmonizowanego systemu (HS): 85176990
Liczba portów USB 2.0: 1
Przewodowa sieć LAN: Tak
Szyfrowanie / bezpieczeństwo: WPA,WPA2
Podstawowy standard Wi-Fi: Wi-Fi 5 (802.11ac)
Typ interfejsu Ethernet LAN: Gigabit Ethernet
Zakres temperatur (przechowywanie): -20 - 70 °C
Prąd wyjściowy: 5 A
Technologia okablowania: 10/100/1000Base-T(X)
Obsługa jakość serwisu (QoS): Tak
Ilość anten: 2
WLAN wskaźnik przesyłu danych (max): 866 Mbit/s
Konstrukcja anteny: Zewnętrzny
Przycisk reset: Tak
Ethernet WAN: Tak
DSL WAN: Tak
Gniazdo karty SIM: Nie
Połączenie USB 3G/4G: Nie
Częstotliwość Wi-Fi: Dual-band (2.4 GHz/5 GHz)
WLAN wskaźnik przesyłu danych (pierwsze pasmo): 300 Mbit/s
WLAN wskaźnik przesyłu danych (drugie pasmo): 300 Mbit/s
3G: Nie
4G: Nie
ADSL: Tak
ADSL2: Tak
ADSL2 +: Tak
VDSL2: Tak
Modem wewnętrzny: Tak
liczba portów RJ-11: 1
Gniazdo/gniazda karty pamięci: Nie
Przycisk WPS: Tak
Firewall: Tak
Aktualizacje oprogramowania urządzenia: Tak
Liczba dołączonych produktów: 1 szt.
Certyfikat Digital Living Network Alliance (DLNA): Tak

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Hikvision DS-2CE76H0T-ITMFS, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Kamera monitorująca Hikvision

Instrukcje Kamera monitorująca

Najnowsze instrukcje dla Kamera monitorująca