Instrukcja obsługi Hikvision DS-2CE16C2T-IT3(12MM)

Hikvision Kamera monitorująca DS-2CE16C2T-IT3(12MM)

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Hikvision DS-2CE16C2T-IT3(12MM) (4 stron) w kategorii Kamera monitorująca. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/4

TURBO HD

Bullet Camera

User Manual

Thank you for purchasing our product. If there

are any questions, or requests, please do not

hesitate to contact the dealer.

This manual applies to

This manual may contain several technical

incorrect places or printing errors, and the

content is subject to change without notice.

The updates will be added to the new version of

this manual. We will readily improve or update

the products or procedures described in the

manual.

Regulatory Information

FCC Information

FCC compliance: This equipment has been

tested and found to comply with the limits for a

digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide

reasonable protection against harmful

interference when the equipment is operated in

a commercial environment. This equipment

generates, uses, and can radiate radio

frequency energy and, if not installed and used

in accordance with the instruction manual, may

cause harmful interference to radio

communications. Operation of this equipment in

a residential area is likely to cause harmful

interference in which case the user will be

required to correct the interference at his own

expense.

0100001040420

FCC Conditions

This device complies with part 15 of the FCC

Rules. Operation is subject to the following two

conditions:

1. This device may not cause harmful

interference.

2. This device must accept any interference

received, including interference that may

cause undesired operation.

EU Conformity Statement

upon the purchase of equivalent new equipment,

or dispose of it at designated collection points.

For more information see: www.recyclethis.info.

2006/66/EC (battery directive):

This product contains a battery that

cannot be disposed of as unsorted

municipal waste in the European

Union.

See the product documentation for specific

battery information. The battery is marked with

this symbol, which may include lettering to

indicate cadmium (Cd), lead (Pb), or mercury (Hg).

For proper recycling, return the battery to your

supplier or to a designated collection point. For

more information see: www.recyclethis.info.

This series of camera adopts new generation

sensor with high sensitivity and advanced circuit

design technology It features high resolution,.

low image distortion and low noise, etc , which.

makes it suitable for surveillance system and

image processing system.

l High performance CMOS sensor and high

resolution bring high-quality image;

l Low illumination;

l OSD menu, parameters are configurable;

l Support auto white balance, auto gain control,

electronic shutter control;

SMART IR mode;

Unit transmission control;

l Advanced 3-axis design meets different

installation requirements.

1 Introduction

1.1 Product Features

1.2 Overview

UD.6L0201D1518A01

2012/19/EU (WEEE directive):

Products marked with this symbol

cannot be disposed of as unsorted

municipal waste in the European

Union. For proper recycling, return

this product to your local supplier

Please refer to the product specification for

camera parameters and functions.

This product and - if applicable - the

supplied accessories too are marked

with "CE" and comply therefore with

the applicable harmonized European

standards listed under the Low Voltage Directive

2006/95/EC, the EMC Directive 2004/108/EC,

the RoHS Directive 2011/65/EU.

1.2.1 Overview of Type I Camera

1.2.2 Overview of Type Camera

1.2.3 Overview of Type CameraIII

2 Installation

Before you start:

l Please make sure that the device in the package

is in good condition and all the assembly parts

are included.

l Make sure that all the related equipment is

power-off during the installation.

l Check the specification of the products for the

installation environment.

l Check whether the power supply is matched

with your power output to avoid damage.

l Please make sure the wall is strong enough to

withstand three times the weight of the camera

and the mounting.

l If the wall is the cement wall, you need to insert

expansion screws before you install the camera.

If the wall is the wooden wall, you can use

self-tapping screw to secure the camera.

l If the product does not function properly,

please contact your dealer or the nearest

service center. Do not disassemble the camera

for repair or maintenance by yourself.

HD Video Cable

Power Cable

Switch Cable

CVBS Cable

Mounting Base

Sun Shield

Lens

IR LED

Sun Shield

Adjustable Screw

Mounting Base

Power Cable

HD Video Cable

CVBS Cable

Switch Cable

Lens

Power Cable

Switch Cable

CVBS Cable

HD Video Cable

Sun Shield Adjustable Screw

IR LED

Steps:

1.Drill the screw holes and the cable hole in the

ceiling according to the supplied drill template.

2.Hammer the supplied plastic expansion bolt into

the screw holes.

2.1 Ceiling Mounting for Type I

Camera

Figure 2-1 Drill Template

III DS-2CE16D5T-IT5

Type Model

III

DS-2CE16C2T-IR

DS-2CE16C2T-IT1

DS-2CE16C2T-IT3

DS-2CE16C2T-IT5

DS-2CE16D5T-IR

DS-2CE16D5T-IT1

DS-2CE16D5T-IT3

720P

1080P

l All the diagrams only apply to cameras with

a 1080p resolution. The cameras with a 720p

resolution of these three types do not have

CVBS cables and switch cables.

The switch cables are designed for toggling

status of the WDR functions for 1080p cameras.

The WDR function is disabled by default, and

you can short the white and black line-ends of

the switch cable to enable the function.

All Screw Holes: for

mounting base

www.hikvision.com

DS-2CE16C2T-IRP

3 Menu Operation

Figure 3-1 Main Menu

SCENE LENS RESET

EXPOSURE WB DAY&NIGHT

BACKLIGHT NR SPECIAL ADJUST

INDOOR

OUT DOOR

INDOOR1

LOW-

LIGHT

MANUAL SHUT TER

AGC

SENS- UP

BRIG HT NESS

D-WDR

DEFOG

BLC

HSBLC

AT W

AWC- SET

INDOOR

OUT DOOR

MANUAL

COLOR

B/W

EXT

2D NR

3D NR

CAM

TITLE

D-EFFECT

MOT ION

PRIVACY

LAUGUAGE

DEFECT

VERSION

SHARPNESS

MON IT OR

LSC

VIDEO.

OUT

EXIT

SET UP

3.1 VIDEO.OUT

PAL or NTSC is selectable .

3.2 LANGUAGE

English, Japanese, CHN1, CHN2, Korean, German,

French, Italian, Spanish, Polish, etc., are selectable.

3.3SETUP

3.3.1 SCENE

You can select indoor, outdoor, indoor 1 and low

-light as the working environments.

3.3.2 LENS

The camera is equipped with a fixed lens.

3.3.3 EXPOSURE

EXPOSURE

1. SHUTTER AUTO

2. AGC OFF

3. SENS-UP ---

4. BRIGHTNESS ---|------ 40

5. DEFOG OFF

6. BACKLIGHT OFF

7. RETURN RET

Figure 3-2 Exposure

SHUTTER: AUTO,1/25, 1/50, FLK, 1/200, 1/400,

1/1k, 1/2k, 1/5k, 1/10k, 1/50k, x2, x4, x6, x8, x10,

and x15 are selectable.

: You can set the AGC value from 0 to 15.AGC

: You can set the SENS-UP to OFF or AUTO.SENS-UP

: You can set the brightness valueBRIGHTNESS

from 1 to 100.

: You can set the D-WDR to ON to improveD-WDR

the image quality or OFF to disable the function.

: You can set the defog function as ON toDEFOG

enable the function. Position, size, and the defog

gradation are configurable.

3.3.4 Backlight

Backlight Compensation (BLC):

Set the gain of BLC as High, Middle, or Low.-GAIN:

Press the up/down/left/right button to-AREA:

define the BLC position and size. Select RET or

AGAIN to go back the BLC menu or re-define the

BLC area.

Restore the BLC settings to the default.-Default:

HSBLC: Select an HSBLC area. Set the DISPLAY

status as ON. Press the up/down/left/right button

to define the area position and size. Set the HSBLC

LEVEL from 0 to 100. Select ALL DAY or Night for the

HSBLC mode. Set the BLACK MASK status as ON or

OFF.

HSBLC

1. SELECT AREA 1

2. DISPLAY ON 8

3. LEVEL ---|------ 40

4. MODE ALL DAY

5. BLACK MASK ON

6. DEFAULT 8

7. RETURN RET

Figure 3-3 HSBLC

3.3.5 White Balance (WB)

INDOOR, OUTDOOR, MANUAL, ATW (Auto-tracking

White Balance), AWC→SET are selectable.

3.3.6 Day & Night

Color, B/W, and EXT are selectable for DAY and

NIGHT switches.

3.3.7 NR

: You can set 2D NR status as ON or OFF.2D NR

: Set the Smart NR status as ON and adjust3D NR

the 3D smart NR sensitivity ranges from 0 to 100.

Set the 3D NR LEVEL ranges from 0 to 100. Set the

2D&3D NR

1. 2DNR OFF

2. 3DNR ON 8

3. RETURN RET

3D NR

1. SMART NR ON8

2. LEVEL ------|--8 0

3. START. AGC -|--------10

4. END. AGC -|--------10

5. RETURN RET

Figure 3-5 NR

Figure 3-6 3D NR

3.3.8 SPECIAL

Edit the camera title on this section.Camera Title:

D-effect:

Set the freeze function as ON or OFF.-FREEZE:

OFF, MIRROR, V-FLIP, and ROTATE are-MIRROR:

selectable for mirror.

Define the zoom area by configuring-D-ZOOM:

the position from PAN & TILT.

The D-Zoom area, sensitivity-SMART D-ZOOM:

and time are configurable.

Set the NEG IMAGE as ON or OFF.-NEG.IMAGE:

SPECIAL

1. CAM TITLE ON 8

2. D-DFFECT 8

3. MOTION OFF

4. PRIVACY OFF

5. LANGUAGE ENG 8

6. DEFECT 8

7. VERSION 130722

8. RETURN RET

Figure 3-7 Special

MOTION

1. SELECT AREA 1

2. DISPLAY ON8

3. SENSIT IVITY ----|---- 30

4. MOTION VIEW ON

5. DEFAULT 8

6. RETURN RET

Figure 3-8 Motion Detection

Motion: Select a MOTION area. Set the DISPLAY

status as ON or OFF. Press the up/down/left/right

button to define the position and size of the area.

Set the SENSITIVITY from 0 to 60. Set the MOTION

VIEW status as ON or OFF.

Privacy: Select a PRIVACY area. Set the DISPLAY

status as INV, MOSAIC, COLOR or OFF. Press the

up/down/left/right button to define the position

and size of the area.

Defect: LIVE DPC, STATIC DPC and Black DPC are

adjustable in this section.

: You can check the software version of theVersion

device.

PRIVACY

1. SELECT AREA 1

2. DISPLAY MOSAIC 8

3. COLOR 10

4. TRANS. 1

5. DEFAULT 8

6. RETURN RET

ADJUST

1. SHARPNESS --------|15

2. MONITOR LCD8

3. LSC OFF

4. VIDEO. OUT PAL

5. RETURN RET

3.3.9 ADJUST

: Adjust the sharpness from 0 to 15.Sharpness

: Monitor CRT, and Monitor LCD areMonitor

selectable.

: Set the LSC status as ON or OFF.LSC

3.3.10 RESET

Reset all the settings to the default.

3.3.11 EXIT

Press OK to exit the menu.

START. AGC level as the threshold to enable AGC,

and set the END. AGC level as the threshold to

disable AGC.

Figure 3-9 Privacy Mask Figure 3-10 Adjust

3.Route the cables to the cable hole and connect

the corresponding power cable and video cable.

4.Fix the camera to the ceiling with the supplied

screws.

Figure 2-2 Fix the Camera to the Ceiling

5.Adjust the surveillance angle.

1).Loosen No.3 adjusting screw to adjust the

panning position 0 ~ 360 .( ° °)

.2).Tighten No.3 adjusting screw

3).Loosen the No.2 adjusting screw to adjust the

tilting position 0 ~ 90( ° °) .

4).Tighten No.2 adjusting screw.

5).Loosen No.1 adjusting screw to adjust the

azimuth angle of the image 0 ~ 360( ° °) .

.6).Tighten No.1 adjusting screw

Figure 2-3 3-axis Adjustment

Steps:

1.Drill the screw holes and the cable hole in the

ceiling according to the supplied drill template.

2.Hammer the supplied plastic expansion bolt into

the screw holes.

2.2 Wall Mounting for Type /IIIII

Camera

Figure 2-4 Drill Template

Ceiling Mounting

No.2 Screw Hole

for Mounting

Base

No.1 Screw Hole

for Bracket

Figure 2-5 Fix the Camera to the Wall

Figure 2-6 3-axis Adjustment

90°

360°

5. Adjust the surveillance angle.

1). Loosen No.3 adjusting screw to adjust the pan

position (0 ~ 360 ).° °

2).Tighten No.3 adjusting screw.

3). Loosen No.2 adjusting screw to adjust the

tilting position(0 ~ 90 ).° °

4).Tighten No.2 adjusting screw.

5). Loosen No.1 adjusting screw to adjust the

rotation position 0 ~ 360 .( ° °)

6).Tighten No.1 adjusting screw.

3.Route the cables to the cable hole and connect

the corresponding power cable and video cable.

4.Fix the camera to the ceiling with the supplied

screws.

Adjusting Screw

l A coaxial camera controller (purchase separately)

is required to select the menu and adjust the

camera parameters.

Cameras with a 720p resolution of these three

types do not support menu operation.

Specyfikacje produktu

Marka:	Hikvision
Kategoria:	Kamera monitorująca
Model:	DS-2CE16C2T-IT3(12MM)

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Hikvision DS-2CE16C2T-IT3(12MM), zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Kamera monitorująca Hikvision

Hikvision DS-2TD2637-15 Instrukcja

8 Grudnia 2024

Hikvision DS-2CE56D5T-AIRZ Instrukcja

15 Października 2024

Hikvision DS-2TD2137-7/VP Instrukcja

13 Października 2024

Hikvision DS-2DE7A245IX-AE/S1 Instrukcja

13 Października 2024

Hikvision DS-2TD2166-15/V1 Instrukcja

13 Października 2024

Hikvision DS-2CD2325FWD-I Instrukcja

13 Października 2024

Hikvision DS-2CD2323G2-IU Instrukcja

12 Października 2024

Hikvision DS-2CD2326G2-IU Instrukcja

12 Października 2024

Hikvision DS-2TD6267-100C4L Instrukcja

12 Października 2024

Hikvision DS-2CD7A26G0-IZ(H)SY Instrukcja

11 Października 2024

Instrukcje Kamera monitorująca

Najnowsze instrukcje dla Kamera monitorująca

I-PRO WV-U2542LA Instrukcja

11 Grudnia 2024

I-PRO B-200-PTZ Instrukcja

11 Grudnia 2024

I-PRO WV-U2130LA Instrukcja

11 Grudnia 2024

ClearOne Unite 260 Pro Instrukcja

11 Grudnia 2024

I-PRO WV-X35402-F2LM Instrukcja

11 Grudnia 2024

Imou Cubo1 Instrukcja

11 Grudnia 2024

Foscam PD5 Instrukcja

10 Grudnia 2024

TP-Link InSight S245 Instrukcja

10 Grudnia 2024

Foscam R8M Instrukcja

10 Grudnia 2024

AViPAS AV-2000W Instrukcja

10 Grudnia 2024