Instrukcja obsługi Hikvision DS-2CE10DFT-F28

Hikvision kamera bezpieczeństwa DS-2CE10DFT-F28

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Hikvision DS-2CE10DFT-F28 (11 stron) w kategorii kamera bezpieczeństwa. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/11

TURBO HD

Full Time Color Series

Bullet Camera

User Manual

Thank you for purchasing our product. If there are any

questions, or requests, do not hesitate to contact the

dealer.

This manual applies to the models below:

Type

Model

Type I Camera

DS- - 2CE10DFT F

DS- -2CE10DFT PF

DS- - 2CE10DFT F28

DS- - 2CE10DFT PF28

Type CameraII

DS- - 2CE12DFT F

DS- - 2CE12DFT F28

This manual may contain several technical incorrect

places or prinng errors, and the content is subject to

change without noce. The updates will be added to

the new version of this manual. We will readily improve

or update the products or procedures described in the

manual.

010000109 2712

Regulatory Informaon

FCC Informaon

Please take attenon that changes or modicaon not

expressly approved by the party responsible for

compliance could void the user’s authority to operate

the equipment.

FCC compliance: This equipment has been tested and

found to comply with the limits for a Class A digital

device, pursuant to part 15 of the FCC Rules. These

limits are designed to provide reasonable protecon

against harmful interference when the equipment is

operated in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy

and, if not installed and used in accordance with the

instrucon manual, may cause harmful interference to

radio communicaons. Operaon of this equipment in a

residenal area is likely to cause harmful interference in

which case the user will be required to correct the

interference at his own expense.

FCC Condions

This device complies with part 15 of the FCC Rules.

Operaon is subject to the following two condions:

1. This device may not cause harmful interference.

2. This device must accept any interference received,

including interference that may cause undesired

operaon.

EU Conformity Statement

This product and if applicable the - -

supplied accessories too are marked with

"CE" and comply therefore with the

applicable harmonized European

standards listed under the Low Voltage Direcve

20 /35/EU, the EMC Direcve 201 30/EU, the RoHS 14 4/

Direcve 2011/65/EU.

20 2/1 19/EU (WEEE directive): Products

marked with this symbol cannot be

disposed of as unsorted municipal waste in

the European Union. For proper recycling,

return this product to your local supplier

upon the purchase of equivalent new

equipment, or dispose of it at designated collecon

points. For more informaon see: www.recyclethis.info.

2006/66/EC (baery direcve): This product contains a

battery that cannot be disposed of as

unsorted municipal waste in the European

Union. See the product documentaon for

specic baery informaon. The baery is

marked with this symbol, which may

include leering to indicate cadmium (Cd), lead (Pb), or

mercury (Hg). For proper recycling, return the baery

to your supplier or to a designated collecon point. For

more informaon, see: www.recyclethis.info.

Industry Canada ICES 003 Compliance-

This device meets the CAN ICES 3 (A)/NMB- -3(A)

standards requirements.

Warning

This is a class A product. In a domesc environment this

product may cause radio interference in which case the

user may be required to take adequate measures.

Safety Instrucon

These instrucons are intended to ensure that user can

use the product correctly to avoid danger or property

loss.

The precauon measure is divided into “Warnings” and

“Cauons”.

Warnings: Serious injury or death may occur if any of

the warnings are neglected.

Cauons: Injury or equipment damage may occur if any

of the cauons are neglected.

Warnings

 In the use of the device, you must be in strict

compliance with the electrical safety regulaons of

the naon and region.

 Input voltage should meet both the SELV (Safety Extra

Low Voltage) and the Limited Power Source with 12

VDC according to the IEC60950 1 standard. Refer to -

technical specicaons for detailed informaon.

 Do not connect mulple devices to one power

adapter to avoid over heang or a re hazard caused -

by overload.

 Make sure that the plug is rmly connected to the

power socket.

 Make sure that the device is rmly fixed if wall

mounng or ceiling mounng is adopted.

 If smoke, odor or noise rise from the device, turn o

the power at once and unplug the power cord, and

then contact the service center.

 Never attempt to disassemble the camera by

unprofessional personal.

Cauons

 Do not drop the camera or subject it to physical

shock.

 Do not touch senor modules with ngers.

 Do not place the camera in extremely hot, cold (the

operang temperature shall be °C to 60°C), dusty -40

or damp locaons, and do not expose it to high

electromagnetic radiation.

 If cleaning is necessary, use clean cloth with a bit of

ethanol and wipe it gently.

 Do not aim the camera at the sun or extra bright

places.

 The sensor may be burned out by a laser beam, so

when any laser equipment is in using, make sure that

the surface of sensor will not be exposed to the laser

beam.

 Do not expose the device to high electromagnetic

radiaon or extremely hot, cold, dusty or damp

environment.

 To avoid heat accumulation, good ventilaon is

required for the operang environment.

Warnings Follow

these safeguards to

prevent serious injury

or death.

Cauons Follow these

precauons to prevent

potenal injury or

material damage.

Specyfikacje produktu

Marka:	Hikvision
Kategoria:	kamera bezpieczeństwa
Model:	DS-2CE10DFT-F28

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Hikvision DS-2CE10DFT-F28, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje kamera bezpieczeństwa Hikvision

Hikvision DS-2CD4C36FWD Instrukcja

4 Lipca 2024

Hikvision DS-2AE7225TI-A Instrukcja

3 Lipca 2024

Hikvision DS-2AE7232TI-A Instrukcja

3 Lipca 2024

Hikvision DS-2AE4215TI-D Instrukcja

3 Lipca 2024

Hikvision DS-2CE12DFT-F28 Instrukcja

3 Lipca 2024

Hikvision DS-2AE5225TI-A Instrukcja

3 Lipca 2024

Hikvision DS-2AE4225TI-D Instrukcja

3 Lipca 2024

Hikvision DS-2AE4225T-D Instrukcja

2 Lipca 2024

Hikvision DS-2CE10DFT-F28 Instrukcja

2 Lipca 2024

Hikvision DS-2AE4225T-D3 Instrukcja

2 Lipca 2024

Instrukcje kamera bezpieczeństwa

Najnowsze instrukcje dla kamera bezpieczeństwa

TRENDnet TV-IP602WN Instrukcja

5 Października 2024

Home Protector 72268 Instrukcja

5 Października 2024

TRENDnet TV-IP302PI Instrukcja

5 Października 2024

Abus IPCB42510B Instrukcja

28 Września 2024

Vivotek FE8171V Supreme Instrukcja

28 Września 2024

Vivotek MD7530 Dome Instrukcja

28 Września 2024

Vivotek IP8362 Supreme Instrukcja

28 Września 2024

Vivotek NR8401 NVR Instrukcja

28 Września 2024

Vivotek ST2403 Software Instrukcja

28 Września 2024

Vivotek PZ8111W PTZ Instrukcja

28 Września 2024