Instrukcja obsługi Hikvision DS-2CD4525FWD-IZH

Hikvision Kamera monitorująca DS-2CD4525FWD-IZH

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Hikvision DS-2CD4525FWD-IZH (165 stron) w kategorii Kamera monitorująca. Ta instrukcja była pomocna dla 16 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/165

User Manual of Network Camera

User Manual

UD.6L0201D1919A01

Network Camera

User Manual of Network Camera

User Manual

Any and all information, including, among others, wordings, pictures, graphs are the

properties of Hangzhou Hikvision Digital Technology Co., Ltd. or its subsidiaries

(hereinafter referred to be “Hikvision”). This user manual (hereinafter referred to be

“the Manual”) cannot be reproduced, changed, translated, or distributed, partially or

wholly, by any means, without the prior written permission of Hikvision. Unless

otherwise stipulated, Hikvision does not make any warranties, guarantees or

representations, express or implied, regarding to the Manual.

About this Manual

This Manual is applicable to Network Camera (V5.3.0).

The Manual includes instructions for using and managing the product. Pictures, charts,

images and all other information hereinafter are for description and explanation only.

The information contained in the Manual is subject to change, without notice, due to

ﬁrmware updates or other reasons. Please ﬁnd the latest version in the company

website ( ). http://overseas.hikvision.com/en/

Please use this user manual under the guidance of professionals.

Trademarks Acknowledgement

and other Hikvision’s trademarks and logos are the properties of

Hikvision in various jurisdictions. Other trademarks and logos mentioned below are

the properties of their respective owners.

Legal Disclaimer

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE

PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND

FIRMWARE, IS PROVIDED “AS IS”, WITH ALL FAULTS AND ERRORS, AND

HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING

WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY,

User Manual of Network Camera

FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF

THIRD PARTY. IN NO EVENT WILL HIKVISION, ITS DIRECTORS, OFFICERS,

EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL,

CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING,

AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS

INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN

CONNECTION WITH THE USE OF THIS PRODUCT, EVEN IF HIKVISION HAS

BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF

PRODUCT SHALL BE WHOLLY AT YOUR OWN RISKS. HIKVISION SHALL

NOT TAKE ANY RESPONSIBILITES FOR ABNORMAL OPERATION,

PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER

ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET

SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY

TECHNICAL SUPPORT IF REQUIRED.

SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL

RELEVANT LAWS IN YOUR JURISDICTION BEFORE USING THIS PRODUCT

IN ORDER TO ENSURE THAT YOUR USE CONFORMS THE APPLICABLE

LAW. HIKVISION SHALL NOT BE LIABLE IN THE EVENT THAT THIS

PRODUCT IS USED WITH ILLEGITIMATE PURPOSES.

IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE

APPLICABLE LAW, THE LATER PREVAILS.

Regulatory Information

FCC Information

FCC compliance: This equipment has been tested and found to comply with the

limits for a digital device, pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference when the

equipment is operated in a commercial environment. This equipment generates, uses,

and can radiate radio frequency energy and, if not installed and used in accordance

User Manual of Network Camera

with the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at his

own expense.

FCC Conditions

This device complies with part 15 of the FCC Rules. Operation is subject to the

following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may

cause undesired operation.

EU Conformity Statement

This product and - if applicable - the supplied accessories too are

marked with "CE" and comply therefore with the applicable

harmonized European standards listed under the EMC Directive

2004/108/EC, the RoHS Directive 2011/65/EU.

2012/19/EU (WEEE directive): Products marked with this symbol

cannot be disposed of as unsorted municipal waste in the European

Union. For proper recycling, return this product to your local

supplier upon the purchase of equivalent new equipment, or dispose

of it at designated collection points. For more information see:

www.recyclethis.info.

2006/66/EC (battery directive): This product contains a battery that

cannot be disposed of as unsorted municipal waste in the European

Union. See the product documentation for speciﬁc battery

information. The battery is marked with this symbol, which may

include lettering to indicate cadmium (Cd), lead (Pb), or mercury

(Hg). For proper recycling, return the battery to your supplier or to a designated

collection point. For more information see: www.recyclethis.info.

Industry Canada ICES-003 Compliance

User Manual of Network Camera

This device meets the CAN ICES-3 (A)/NMB- A) standards requirements. 3(

Safety Instruction

These instructions are intended to ensure that the user can use the product correctly to

avoid danger or property loss.

The precaution measure is divided into ‘Warnings’ and ‘Cautions’:

Warnings: Serious injury or death may be caused if any of these warnings are

neglected.

Cautions: Injury or equipment damage may be caused if any of these cautions are

neglected.

Warnings llow these safeguards to Fo

prevent serious injury or death.

Cautions Follow these precautions to

prevent potential injury or material

damage.

Warnings:

 Please adopt the power adapter which can meet the safety extra low voltage

(SELV) standard. And source with 12 V or 24 VDC AC (depending on models)

according to the IEC60950-1 and Limited Power Source standard.

 To reduce the risk of ﬁre or electrical shock, do not expose this product to rain or

moisture.

 This installation should be made by a qualiﬁed service person and should conform

to all the local codes.

 Please install blackouts equipment into the power supply circuit for convenient

supply interruption.

 Please make sure that the ceiling can support more than 50(N) Newton gravities if

the camera is ﬁxed to the ceiling.

 If the product does not work properly, please contact your dealer or the nearest

service center. Never attempt to disassemble the camera yourself. (We shall not

assume any responsibility for problems caused by unauthorized repair or

maintenance.)

User Manual of Network Camera

Cautions:

 Make sure the power supply voltage is correct before using the camera.

 Do not drop the camera or subject it to physical shock.

 Do not touch sensor modules with ﬁngers. If cleaning is necessary, use a clean

cloth with a bit of ethanol and wipe it gently. If the camera will not be used for an

extended period of time, put on the lens cap to protect the sensor from dirt.

 Do not aim the camera lens at the strong light such as sun or incandescent lamp.

The strong light can cause fatal damage to the camera.

 The sensor may be burned out by a laser beam, so when any laser equipment is

being used, make sure that the surface of the sensor not be exposed to the laser

beam.

 Do not place the camera in extremely hot, cold temperatures (the operating

temperature should be between -30°C ~ 60°C, or -40°C ~ 60°C if the camera

model has an “H” in its suffix), dusty or damp environment, and do not expose it

to high electromagnetic radiation.

 To avoid heat accumulation, good ventilation is required for a proper operating

environment.

 Keep the camera away from water and any liquid.

 While shipping, the camera should be packed in its original packing.

 Improper use or replacement of the battery may result in hazard of explosion.

Please use the manufacturer recommended battery type.

Notes:

For the camera supports IR, you are required to pay attention to the following

precautions to prevent IR reﬂection:

 Dust or grease on the dome cover will cause IR reﬂection. Please do not remove

the dome cover ﬁlm until the installation is ﬁnished. If there is dust or grease on

the dome cover, clean the dome cover with clean soft cloth and isopropyl alcohol.

 Make certain the installation location does not have reﬂective surfaces of objects

too close to the camera. The IR light from the camera may reﬂect back into the

lens causing reﬂection.

 The foam ring around the lens must be seated ﬂush against the inner surface of

the bubble to isolate the lens from the IR LEDS. Fasten the dome cover to camera

body so that the foam ring and the dome cover are attached seamlessly.

User Manual of Network Camera

Table of Contents

Chapter 1 System Requirement ................................................................................ 10

Chapter 2 Network Connection ............................................................................... 11

2.1 Setting the Network Camera over the LAN........................................................ 11

2.1.1 Wiring over the LAN ...................................................................................................... 11

2.1.2 Activating the Camera .................................................................................................... 12

2.2 Setting the Network Camera over the WAN ...................................................... 18

2.2.1 Static IP Connection ....................................................................................................... 18

2.2.2 Dynamic IP Connection .................................................................................................. 19

Chapter 3 Access to the Network Came ............................................................... 22 ra

3.1 Accessing by Web Browsers ................................................................................ 22

3.2 Accessing by Client Software .............................................................................. 24

Chapter 4 -Fi Settings .......................................................................................... 26 Wi

4.1 Conﬁguring Wi-Fi Connection in Manage and Ad-hoc Modes ....................... 26

4.2 Easy Wi-Fi Connection with WPS function ....................................................... 31

4.3 IP Property Settings for Wireless Network Connection ................................... 33

Chapter 5 Live View ................................................................................................. 35

5.1 Live View Page ..................................................................................................... 35

5.2 Starting Live View ................................................................................................ 36

5.3 Recording and Capturing Pictures Manually ................................................... 37

5.4 Operating PTZ Control ....................................................................................... 37

5.4.1 PTZ Control Panel .......................................................................................................... 37

5.4.2 Setting / Calling a Preset . ................................................................................................ 38

5.4.3 Setting / Calling a Patrol ................................................................................................. 40

Chapter 6 Network Camera Conﬁguration ............................................................. 41

6.1 Conﬁguring Local Parameters............................................................................ 41

6.2 Conﬁguring Time Settings .................................................................................. 43

6.3 Conﬁguring Network Settings ............................................................................ 45

6.3.1 Conﬁguring TCP/IP Settings .......................................................................................... 45

6.3.2 Conﬁguring Port Settings ............................................................................................... 46

6.3.3 Conﬁguring PPPoE Settings ........................................................................................... 47

6.3.4 Conﬁguring DDNS Settings ........................................................................................... 48

6.3.5 Conﬁguring SNMP Settings ........................................................................................... 51

6.3.6 Conﬁguring 802.1X Settings .......................................................................................... 52

6.3.7 Conﬁguring QoS Settings ............................................................................................... 54

6.3.8 Configuring UPnP™ Settings......................................................................................... 54

User Manual of Network Camera

6.3.9 Conﬁguring Wireless Dial Settings ................................................................................ 55

6.3.10 Email Sending Triggered by Alarm ................................................................................ 58

6.3.11 Conﬁguring NAT (Network Address Translation) Settings ............................................ 60

6.3.12 Conﬁguring FTP Settings ............................................................................................... 61

6.3.13 Platform Access .............................................................................................................. 62

6.3.14 HTTPS Settings .............................................................................................................. 63

6.4 Conﬁguring Video and Audio Settings ............................................................... 65

6.4.1 Conﬁguring Video Settings ............................................................................................65

6.4.2 Conﬁguring Audio Settings ............................................................................................ 68

6.4.3 Conﬁguring ROI Encoding ............................................................................................. 68

6.4.4 Display Information on Stream ....................................................................................... 70

6.4.5 Conﬁguring Target Cropping .......................................................................................... 71

6.5 Conﬁguring Image Parameters .......................................................................... 72

6.5.1 Conﬁguring Display Settings .........................................................................................72

6.5.2 Conﬁguring OSD Settings .............................................................................................. 77

6.5.3 Conﬁguring Text Overlay Settings ................................................................................. 79

6.5.4 Conﬁguring Privacy Mask .............................................................................................. 80

6.5.5 Conﬁguring Picture Overlay ........................................................................................... 81

6.6 Conﬁguring and Handling Alarms ..................................................................... 82

6.6.1 Conﬁguring Motion Detection ........................................................................................82

6.6.2 Conﬁguring Video Tampering Alarm ............................................................................. 88

6.6.3 Conﬁguring Alarm Input ................................................................................................ 89

6.6.4 Conﬁguring Alarm Output .............................................................................................. 90

6.6.5 Handling Exception ........................................................................................................ 91

6.6.6 Conﬁguring Other Alarm ................................................................................................ 92

6.6.7 Conﬁguring Audio Exception Detection ........................................................................95

6.6.8 Conﬁguring Defocus Detection ...................................................................................... 96

6.6.9 Conﬁguring Scene Change Detection ............................................................................. 97

6.6.10 Conﬁguring Face Detection ............................................................................................ 98

6.6.11 Conﬁguring Line Crossing Detection ............................................................................. 99

6.6.12 Conﬁguring Intrusion Detection ................................................................................... 101

6.6.13 Conﬁguring Region Entrance Detection ....................................................................... 103

6.6.14 Conﬁguring Region Exiting Detection ......................................................................... 104

6.6.15 Conﬁguring Unattended Baggage Detection ................................................................ 105

6.6.16 Conﬁguring Object Removal Detection ....................................................................... 107

6.7 VCA Conﬁguration ............................................................................................ 109

6.7.1 Behavior Analysis ......................................................................................................... 109

6.7.2 Face Capture ................................................................................................................. 116

6.7.3 Heat Map ...................................................................................................................... 119

6.7.4 People Counting ...........................................................................................................122

Chapter 7 Storage Settings ..................................................................................... 126

7.1 Conﬁguring NAS Settings ................................................................................. 126

User Manual of Network Camera

7.2 Conﬁguring Recording Schedule ...................................................................... 128

7.3 Conﬁguring Snapshot Settings ......................................................................... 132

7.4 Conﬁguring Lite Storage ................................................................................... 134

7.5 Conﬁguring Cloud Storage ............................................................................... 135

Chapter 8 Counting ................................................................................................ 137

Chapter 9 Road Trafﬁc ........................................................................................... 140

Chapter 10 Playback ............................................................................................ 144

Chapter 11 Log Searching ................................................................................... 146

Chapter 12 Others ................................................................................................ 148

12.1 Managing User Accounts ................................................................................... 148

12.2 Authentication .................................................................................................... 150

12.3 Anonymous Visit ................................................................................................ 151

12.4 IP Address Filter ................................................................................................. 152

12.5 Security Service .................................................................................................. 153

12.6 Viewing Device Information .............................................................................. 154

12.7 Maintenance ....................................................................................................... 155

12.7.1 Rebooting the Camera .................................................................................................. 155

12.7.2 Restoring Default Settings ............................................................................................ 155

12.7.3 Exporting / Importing Conﬁguration File ..................................................................... 156

12.7.4 Upgrading the System ................................................................................................... 157

12.8 -232 Settings ................................................................................................... 157 RS

12.9 -485 Settings ................................................................................................... 158 RS

12.10 Service Settings ................................................................................................... 159

Appendix .................................................................................................................... 160

Appendix 1 SADP Software Introduction ..................................................................... 160

Appendix 2 Port Mapping .............................................................................................. 163

User Manual of Network Camera

Chapter 1 System Requirement

Operating System: Microsoft Windows XP SP1 and above version / Vista / Win7 /

Server 2003 / Server 2008 32bits

CPU: Intel Pentium IV 3.0 GHz or higher

RAM: 1G or higher

Display: 1024×768 resolution or higher

Web Browser: Internet Explorer 6.0 and above version, Apple Safari 5.02 and above

version, Mozilla Firefox 3.5 and above version and Google Chrome8 and above

version.

User Manual of Network Camera

Chapter 2 Network Connection

Note:

 You shall acknowledge that the use of the product with Internet access might be

under network security risks. For avoidance of any network attacks and

information leakage, please strengthen your own protection. If the product does

not work properly, please contact with your dealer or the nearest service center.

 To ensure the network security of the network camera, we recommend you to

have the network camera assessed and maintained termly. You can contact us if

you need such service.

Before you start:

 If you want to set the network camera via LAN (Local Area Network), please a

refer to Section 2.1 Setting the Network Camera over the LAN.

 If you want to set the network camera via WAN (Wide Area Network), please a

refer to Section 2.2 Setting the Network Camera over the WAN.

2.1 Setting the Network Camera over the LAN

Purpose:

To view and conﬁgure the camera via LAN, you need to connect the network a

camera in the same subnet with your computer, and install the SADP or iVMS-4200

software to search and change the IP of the network camera.

Note: For the detailed introduction of SADP, please refer to Appendix 1.

2.1.1 Wiring over the LAN

The following ﬁgures show the two ways of cable connection of network camera a

and computer: a

Purpose:

 To test the network camera, you can directly connect the network camera to the

computer with a network cable as shown in Figure 2-1.

User Manual of Network Camera

 Refer to the Figure 2-2 to set network camera over the LAN via a switch or a

router.

Figure 2-1 Connecting Directly

Figure 2-2 Connecting via a Switch or Router a

2.1.2 Activating the Camera

You are required to activate the camera ﬁrst by setting a strong password for it before

you can use the camera.

Activation via Web Browser, Activation via SADP, and Activation via Client Software

are all supported.

 Activation via Web Browser

Steps:

1. Power on the camera, and connect the camera to the network.

2. Input the IP address into the address bar of the web browser, and click Enter to

enter the activation interface.

Notes:

 The default IP address of the camera is 192.168.1.64.

 For the camera enables the DHCP by default, you need to activate the camera

via SADP software. Please refer to the following chapter for Activation via SADP.

User Manual of Network Camera

Figure 2-3 Activation Interface(Web)

3. Create a password and input the password into the password ﬁeld.

STRONG PASSWORD RECOMMENDED– We highly recommend you

create a strong password of your own choosing (using a minimum of 8

characters, including upper case letters, lower case letters, numbers, and special

characters) in order to increase the security of your product. And we recommend

you reset your password regularly, especially in the high security system,

resetting the password monthly or weekly can better protect your product.

4. Conﬁrm the password.

5. Click OK to save the password and enter the live view interface.

 Activation via SADP Software

SADP software is used for detecting the online device, activating the camera, and

resetting the password.

Get the SADP software from the supplied disk or the oﬀicial website, and install the

SADP according to the prompts. Follow the steps to activate the camera.

Steps:

1. Run the SADP software to search the online devices.

2. Check the device status from the device list, and select the inactive device.

User Manual of Network Camera

Figure 2-4 SADP Interface

3. Create a password and input the password in the password ﬁeld, and conﬁrm the

password.

STRONG PASSWORD RECOMMENDED– We highly recommend

you create a strong password of your own choosing (using a minimum

of 8 characters, including upper case letters, lower case letters, numbers,

and special characters) in order to increase the security of your product.

And we recommend you reset your password regularly, especially in the

high security system, resetting the password monthly or weekly can

better protect your product.

4. Click to save the password. OK

You can check whether the activation is completed on the popup window. If activation

failed, please make sure that the password meets the requirement and try again.

5. Change the device IP address to the same subnet with your computer by either

modifying the IP address manually or checking the checkbox of Enable DHCP.

User Manual of Network Camera

Figure 2-5 Modify the IP Address

6. Input the password and click the button to activate your IP address Save

modiﬁcation.

 Activation via Client Software

The client software is versatile video management software for multiple kinds of

devices.

Get the client software from the supplied disk or the oﬀicial website, and install the

software according to the prompts. Follow the steps to activate the camera.

Steps:

1. Run the client software and the control panel of the software pops up, as shown in

the ﬁgure below.

User Manual of Network Camera

Figure 2-6 Control Panel

2. Click the icon to enter the Device Management interface, as Device Management

shown in the ﬁgure below.

Figure 2-7 Device Management Interface

User Manual of Network Camera

3. Check the device status from the device list, and select an inactive device.

4. Click the button to pop up the Activation interface. Activate

5. Create a password and input the password in the password ﬁeld, and conﬁrm the

password.

STRONG PASSWORD RECOMMENDED– We highly recommend

you create a strong password of your own choosing (using a minimum of

8 characters, including upper case letters, lower case letters, numbers,

and special characters) in order to increase the security of your product.

We recommend you reset your password regularly, especially in the high

security system, resetting the password monthly or weekly can better

protect your product.

Figure 2-8 Activation Interface (Client Software)

6. Click button to start activation. OK

7. Click the Modify Netinfo button to pop up the Network Parameter Modiﬁcation

interface, as shown in the ﬁgure below.

User Manual of Network Camera

Figure 2-9 Modifying the Network Parameters

8. Change the device IP address to the same subnet with your computer by either

modifying the IP address manually or checking the checkbox of Enable DHCP.

9. Input the password to activate your IP address modiﬁcation.

2.2 Setting the Network Camera over the WAN

Purpose:

This section explains how to connect the network camera to the WAN with a static IP

or a dynamic IP.

2.2.1 Static IP Connection

Before you start:

Please apply a static IP from an ISP (Internet Service Provider). With the static IP

address, you can connect the network camera via a router or connect it to the WAN

directly.

 Connecting the network camera via a router

Steps:

1. Connect the network camera to the router.

User Manual of Network Camera

2. Assign a LAN IP address, the subnet mask and the gateway. Refer to Section 2.1.2

for detailed IP address conﬁguration of the network camera.

3. Save the static IP in the router.

4. Set port mapping, e.g., 80, 8000, and 554 ports. The steps for port mapping vary

according to the diﬀerent routers. Please call the router manufacturer for

assistance with port mapping.

Note: Refer to Appendix 2 for detailed information about port mapping.

5. Visit the network camera through a web browser or the client software over the

internet.

Figure 2-10 Accessing the Camera through Router with Static IP

 Connecting the network camera with static IP directly

You can also save the static IP in the camera and directly connect it to the internet

without using a route Refer to Section 2.1.2 for detailed IP address conﬁguration of r.

the network camera.

Figure 2-11 Accessing the Camera with Static IP Directly

2.2.2 Dynamic IP Connection

Before you start:

Please apply a dynamic IP from an ISP. With the dynamic IP address, you can connect

the network camera a modem or a router. to

 Connecting the network camera via a router

Steps:

User Manual of Network Camera

1. Connect the network camera to the router.

2. In the camera, assign a LAN IP address, the subnet mask and the gateway. Refer

to Section 2.1.2 for detailed IP address conﬁguration of the network camera.

3. In the router, set the PPPoE user name, password and conﬁrm the password.

4. Set port mapping. E.g. 80, 8000, and 554 ports. The steps for port mapping vary

depending on diﬀerent routers. Please call the router manufacturer for assistance

with port mapping.

Note: Refer to Appendix 2 for detailed information about port mapping.

5. Apply a domain name from a domain name provider.

6. Conﬁgure the DDNS settings in the setting interface of the router.

7. Visit the camera via the applied domain name.

 Connecting the network camera via a modem

Purpose:

This camera supports the PPPoE auto dial-up function. The camera gets a public IP

address by ADSL dial-up after the camera is connected to a modem. You need to

conﬁgure the PPPoE parameters of the network camera. Refer to Section 6.3.3

Conﬁguring PPPoE Settings for detailed conﬁguration.

Figure 2-12 Accessing the Camera with Dynamic IP

Note: The obtained IP address is dynamically assigned via PPPoE, so the IP address

always changes after rebooting the camera. To solve the inconvenience of the

dynamic IP, you need to get a domain name from the DDNS provider (E.g.

DynDns.com). Please follow the steps below for normal domain name resolution and

private domain name resolution to solve the problem.

 Normal Domain Name Resolution

User Manual of Network Camera

Figure 2-13 Normal Domain Name Resolution

Steps:

1. Apply a domain name from a domain name provider.

2. Conﬁgure the DDNS settings in the interface of the network DDNS Settings

camera. Refer to for detailed Section 6.3.4 Conﬁguring DDNS Settings

conﬁguration.

3. Visit the camera via the applied domain name.

 Private Domain Name Resolution

Figure 2-14 Private Domain Name Resolution

Steps:

1. Install and run the IP Server software in a computer with a static IP.

2. Access the network camera through the LAN with a web browser or the client

software.

3. Enable DDNS and select IP Server as the protocol type. Refer to Section 6.3.4

Conﬁguring DDNS Settings for detailed conﬁguration.

User Manual of Network Camera

Chapter 3 Access to the Network

Camera

3.1 Accessing by Web Browsers

Steps:

1. Open the web browser.

2. In the browser address bar, input the IP address of the network camera, and press

the key to enter the login interface. Enter

3. Activate the network camera for the ﬁrst time using, refer to the section 2 .2 for .1

details.

Note:

 The default IP address is 192.168.1.64.

 If the camera is not activated, please activate the camera ﬁrst according to

Chapter 3.1 or Chapter 3.2.

4. Select English as the interface language on the top-right of login interface.

5. Input the user name and password and click .

The admin user should conﬁgure the device accounts and user/operator permissions

properly. Delete the unnecessary accounts and user/operator permissions.

Note:

The device IP address gets locked if the admin user performs 7 failed password

attempts (5 attempts for the user/operator).

Figure 3-1 Login Interface

User Manual of Network Camera

6. Install the plug-in before viewing the live video and operating the camera. Please

follow the installation prompts to install the plug- . in

Figure 3-2 Download and Install Plug- in

Figure 3-3 Install Plug-in (1)

Figure 3-4 Install Plug-in (2)

Note: You may have to close the web browser to install the plug-in. Please reopen the

User Manual of Network Camera

web browser and log in again after installing the plug-in.

3.2 Accessing by Client Software

The product CD contains the iVMS-4200 client software. You can view the live video

and manage the camera with the software.

Follow the installation prompts to install the software. The control panel and live view

interface of iVMS-4200 client software are shown as below.

Figure 3-5 iVMS-4200 Control Panel

User Manual of Network Camera

Figure 3-6 iVMS-4200 Main View

Note: For detailed information about the software, please refer to the user manual of

the iVMS-4200.

User Manual of Network Camera

Chapter 4 -Fi Settings Wi

Purpose:

By connecting to the wireless network, you don’t need to use cable of any kind for

network connection, which is very convenient for the actual surveillance application.

Note: This chapter is only applicable for the cameras with the built-in Wi-Fi module.

4.1 Conﬁguring Wi-Fi Connection in Manage and

Ad-hoc Modes

Before you start:

A wireless network must be conﬁgured.

Wireless Connection in Manage Mode

Steps:

1. Enter the Wi-Fi conﬁguration interface.

Conﬁguration> Advanced Conﬁguration> Network> Wi- Fi

Figure 4-1 Wireless Network List

2. Click Search to search the online wireless connections.

3. Click to choose a wireless connection on the list.

Figure 4-2 -Fi Setting- Manage Mode Wi

User Manual of Network Camera

4. Check the checkbox to select the and the Network mode as Manage, Security

mode of the network is automatically shown when you select the wireless

network, please don’t change it manually.

Note: These parameters are exactly identical with those of the router.

5. Enter the key to connect the wireless network. The key should be that of the

wireless network connection you set on the router.

Wireless Connection in Ad-hoc Mode

If you choose the Ad-hoc mode, you don’t need to connect the wireless camera via a

router. The scenario is the same as you connect the camera and the PC directly with a

network cable.

Steps:

1. Choose Ad-hoc mode.

Figure 4-3 -Fi Setting- Wi Ad-hoc

2. Customize a SSID for the camera.

3. Choose the Security Mode of the wireless connection.

Figure 4-4 Security Mode- Ad-hoc Mode

4. able the wireless connection function for your PC. En

5. On the PC side, search the network and you can see the SSID of the camera

listed.

User Manual of Network Camera

Figure 4-5 -hoc Connection Point Ad

6. Choose the SSID and connect.

Security Mode Description:

Figure 4-6 Security Mode

You can choose the Security Mode as not-encrypted, WEP, WPA-personal,

WPA-enterprise, WPA2-personal, and WPA2-enterprise.

WEP mode:

Figure 4-7 WEP Mode

 Authentication - Select Open or Shared Key System Authentication, depending on

User Manual of Network Camera

the method used by your access point. Not all access points have this option, in

which case they probably use Open System, which is sometimes known as SSID

Authentication.

 Key length - This sets the length of the key used for the wireless encryption, 64 or

128 bit. The encryption key length can sometimes be shown as 40/64 and

104/128.

 Key type - The key types available depend on the access point being used. The

following options are available:

HEX - Allows you to manually enter the hex key.

ASCII - In this method the string must be exactly 5 characters for 64-bit WEP

and 13 characters for 128-bit WEP.

WPA-personal and WPA2-personal Mode:

Enter the required Pre-shared Key for the access point, which can be a hexadecimal

number or a passphrase.

Figure 4-8 Security Mode- WPA-personal

WPA- enterprise and WPA2-enterprise Mode:

Choose the type of client/server authentication being used by the access point;

EAP-TLS or EAP-PEAP.

EAP-TLS

User Manual of Network Camera

Figure 4-9 EAP-TLS

 Identity - Enter the user ID to present to the network.

 Private key password Enter the password for your user ID. –

 EAPOL version - Select the version used (1 or 2) in your access point.

 CA Certiﬁcates - Upload a CA certiﬁcate to present to the access point for

authentication.

EAP-PEAP:

 User Name - Enter the user name to present to the network

 Password - Enter the password of the network

 PEAP Version - Select the PEAP version used at the access point.

 Label - Select the label used by the access point.

 EAPOL version - Select version (1 or 2) depending on the version used at the

access point

 CA Certiﬁcates - Upload a CA certiﬁcate to present to the access point for

authentication

 For your privacy and to better protect your system against security risks, we

strongly recommend the use of strong passwords for all functions and network

devices. The password should be something of your own choosing (using a

minimum of 8 characters, including upper case letters, lower case letters,

User Manual of Network Camera

numbers and special characters) in order to increase the security of your product.

 Proper conﬁguration of all passwords and other security settings is the

responsibility of the installer and/or end-user.

4.2 Easy Wi-Fi Connection with WPS function

Purpose:

The setting of the wireless network connection is never easy. To avoid the complex

setting of the wireless connection you can enable the WPS function.

WPS (Wi-Fi Protected Setup) refers to the easy conﬁguration of the encrypted

connection between the device and the wireless router. The WPS makes it easy to add

new devices to an existing network without entering long passphrases. There are two

modes of the WPS connection, the PBC mode and the PIN mode.

Note: If you enable the WPS function, you do not need to conﬁgure the parameters

such as the encryption type and you don’t need to know the key of the wireless

connection.

Steps:

Figure 4-10 -Fi Settings - WPS Wi

PBC Mode:

PBC refers to the Push-Button-Conﬁguration, in which the user simply has to push a

button, either an actual or virtual one (as the button on the conﬁguration

interface of the IE browser), on both the Access Point (and a registrar of the network)

and the new wireless client device.

1. Check the checkbox of to enable WPS.

User Manual of Network Camera

2. Choose the connection mode as PBC.

Note: Support of this mode is mandatory for both the Access Points and the

connecting devices.

3. Check on the Wi-Fi router to see if there is a WPS button. If yes push the button

and you can see the indicator near the button start ﬂashing, which means the WPS

function of the router is enabled. For detailed operation, please see the user guide of

the router.

4. Push the WPS button to enable the function on the camera.

If there is not a WPS button on the camera, you can also click the virtual button to

enable the PBC function on the web interface.

5. Click button. Connect

When the PBC mode is both enabled in the router and the camera, the camera and the

wireless network is connected automatically.

PIN Mode:

The PIN mode requires a Personal Identiﬁcation Number (PIN) to be read from either

a sticker or the display on the new wireless device. This PIN must then be entered to

connect the network, usually the Access Point of the network.

Steps:

1. Choose a wireless connection on the list and the SSID is shown.

User Manual of Network Camera

Figure 4-11 -Fi Settings WPS PIN Mode Wi –

2. Choose Use route PIN code.

If the PIN code is generated from the router side, you should enter the PIN code you

get from the router side in the Router PIN code ﬁeld.

3. Click . Connect

You can generate the PIN code on the camera side. And the expired time for the PIN

code is 120 seconds.

1. Click . Generate

2. Enter the code to the router, in the example, enter 48167581 to the route r.

4.3 IP Property Settings for Wireless Network

Connection

The default IP address of wireless network interface controller is 192.168.1.64. When

you connect the wireless network you can change the default IP.

Steps:

User Manual of Network Camera

1. Enter the TCP/IP conﬁguration interface.

Conﬁguration> Advanced Conﬁguration> Network> TCP/IP

Conﬁguration> Basic Conﬁguration> Network> TCP/IP

Figure 4-12 TCP/IP Settings

2. Select the NIC as wlan.

3. Customize the IPv4 address, the IPv4 Subnet Mask and the Default Gateway.

The setting procedure is the same with that of LAN.

If you want to be assigned the IP address you can check the checkbox to enable the

DHCP.

User Manual of Network Camera

Chapter 5 Live View

5.1 Live View Page

Purpose:

The live view page allows you to view the real-time video, capture images, realize

PTZ control, set/call presets and conﬁgure video parameters.

Log the network camera to enter the live view page, or you can click in Live View on

the menu bar of the main page to enter the live view page.

Descriptions of the live view page:

Figure 5-1 Live View Page

Camera Model:

It lists the camera model you are connecting to.

Online Help:

Click to get the online help, which will guide you through the basic operations for

each function.

Menu Bar:

Click each tab to enter Live View, Playback, Log and Conﬁguration page

respectively.

User Manual of Network Camera

Display Control:

Click each tab to adjust the layout and the stream type of the live view. And you can

click the drop-down to select the plug-in. For IE (internet explorer) user,

webcomponents and quick time are selectable. And for Non-IE user, webcomponents,

quick time, VLC or MJPEG is selectable if they are supported by the web browser.

Live View Window:

Display the live video.

Toolbar:

Operations on the live view page, e.g., live view, capture, record, audio on/oﬀ,

two-way audio, etc.

PTZ Control:

Panning, tilting and zooming actions of the camera and the light and wiper control.

(only available for cameras supporting PTZ function)

Preset/Patrol Settings :

Set/call/delete the presets or patrols for PTZ cameras.

5.2 Starting Live View

In the live view window as shown in Figure 5-2, click on the toolbar to start the

live view of the camera.

Figure 5-2 Live View Toolbar

Table 5-1 Descriptions of the Toolbar

Icon

Description

Start/Stop live view.

The window size is 4:3.

The window size is 16:9.

The original widow size.

Self-adaptive window size.

Live view with the main stream.

Live view with the sub stream.

Live view with the third stream.

User Manual of Network Camera

Click to select the third-party plug-in.

Manually capture the picture.

Manually start/stop recording.

Audio on and adjust volume /Mute.

Turn on/oﬀ microphone.

Turn on/oﬀ digital zoom function.

Turn on/oﬀ 3D positioning function.

Note: The third stream and 3D positioning require the support of camera.

5.3 Recording and Capturing Pictures Manually

In the live view interface, click on the toolbar to capture the live pictures or

click to record the live view. The saving paths of the captured pictures and clips

can be set on the page. To conﬁgure remote Configuration > Local Configuration

scheduled recording, please refer to . Section 7.2

Note: The captured image will be saved as JPEG ﬁle or BMP ﬁle your computer. in

5.4 Operating PTZ Control

Purpose:

In the live view interface, you use the PTZ control buttons to realize pan/tilt/zoom can

control of the camera.

Note: To realize PTZ control, the camera connected to the network must support the

PTZ function or a pan/tilt unit has been installed to the camera. Please properly set the

PTZ parameters on RS-485 s tings page referring et to Section 12.9 .RS-485 Settings

5.4.1 PTZ Control Panel

On the live view page, click to show the PTZ control panel click to or

hide . it

Click the direction buttons to control the pan/tilt movements.

User Manual of Network Camera

Figure 5-3 PTZ Control Panel

Click the zoom/iris/focus buttons to realize lens control.

Notes:

 There are 8 direction arrows ( , , , , , , , ) in the live view window

when you click and drag the mouse in the relative positions.

 For the cameras which support lens movements only, the direction buttons are

invalid.

Table 5-2 Descriptions of PTZ Control Panel

Icon

Description

Zoom in/out

Focus near/far

Iris / + -

Light on/off

Wiper on/off

Auxiliary focus

Initialize lens

Adjust speed of pan/tilt movements

5.4.2 Setting / Calling a Preset

 Setting a Preset:

1. In the PTZ control panel, select a preset number from the preset list.

User Manual of Network Camera

Figure 5-4 Setting a Preset

2. Use the PTZ control buttons to move the lens the desired position. to

• Pan the camera to the right or left.

• Tilt the camera up or down.

• Zoom in or out.

• Refocus the lens.

3. Click to ﬁnish the setting of the current preset.

4. You can click to delete the preset.

Note: Up to 16 presets can be conﬁgured for the Network Mini PT Camera.

 Calling a Preset:

This feature enables the camera to point to a speciﬁed preset scene manually or when

an event takes place.

For the deﬁned preset, you can call it at any time to the desired preset scene.

In the PTZ control panel, select a deﬁned preset from the list and click to call the

preset.

Or you can place the mouse on the presets interface, and call the preset by typing the

preset No. to call the corresponding presets.

Figure 5-5 Calling a Preset

User Manual of Network Camera

5.4.3 Setting / Calling a Patrol

Note:

No less than 2 presets have to be configured before you set a patrol.

Steps:

1. Click to enter the patrol configuration interface.

2. Select a path No., and click to add the configured presets.

3. Select the preset, and input the patrol duration and patrol speed.

4. Click OK to save the first preset.

5. Follow the steps above to add the other presets.

Figure 5-6 Add Patrol Path

6. Click to save a patrol.

7. Click to start the patrol, and click to stop it.

8. (Optional) Click to delete a patrol.

User Manual of Network Camera

Chapter 6 Network Camera

Configuration

6.1 Configuring Local Parameters

Note: The local configuration refers to the parameters of the live view, record files

and captured pictures. The record files and captured pictures are the ones you record

and captured using the web browser and thus the saving paths of them are on the PC

running the browser.

Steps:

1. Enter the Local Configuration interface:

Configuration > Local Configuration

Figure 6-1 Local Configuration Interface

2. Configure the following settings:

 Live View Parameters: Set the protocol type and live view performance.

 Protocol Type: TCP, UDP, MULTICAST and HTTP are selectable.

TCP: Ensures complete delivery of streaming data and better video quality,

yet the real-time transmission will be affected.

User Manual of Network Camera

UDP: Provides real-time audio and video streams.

HTTP: Allows the same quality as of TCP without setting specific ports for

streaming under some network environments.

MULTICAST: It’s recommended to select MCAST type when using the

Multicast function. For detailed information about Multicast, refer to Section

6.3.1 Configuring TCP/IP Settings.

 Live View Performance: Set the live view performance to Shortest Delay or

Auto.

 Rules: It refers to the rules on your local browser, select enable or disable to

display or not display the colored marks when the motion detection, face

detection, or intrusion detection is triggered. E.g.: enabled as the rules are, and

the face detection is enabled as well, when a face is detected, it will be marked

with a green rectangle on the live view.

 Image Format: Choose the image format for picture capture.

 Record File Settings: Set the saving path of the recorded video files. Valid for the

record files you recorded with the web browser.

 Record File Size: Select the packed size of the manually recorded and

downloaded video files to 256M, 512M or 1G. After the selection, the

maximum record file size is the value you selected.

 Save record files to: Set the saving path for the manually recorded video files.

 Save downloaded files to: Set the saving path for the downloaded video files

in playback mode.

 Picture and Clip Settings: Set the saving paths of the captured pictures and

clipped video files. Valid for the pictures you captured with the web browser.

 Save snapshots in live view to: Set the saving path of the manually captured

pictures in live view mode.

 Save snapshots when playback to: Set the saving path of the captured

pictures in playback mode.

 Save clips to: Set the saving path of the clipped video files in playback mode.

Note: You can click Browse to change the directory for saving the clips and pictures.

User Manual of Network Camera

3. Click to save the settings. Save

6.2 Configuring Time Settings

Purpose:

You can follow the instructions in this section to configure the time synchronization

and DST settings.

Steps:

1. Enter the Time Settings interface:

Configuration > Basic Configuration > System > Time Settings

Or Configuration > Advanced Configuration > System > Time Settings

Figure 6-2 Time Settings

 Select the Time Zone.

Select the Time Zone of your location from the drop-down menu.

 Synchronizing Time by NTP Server.

(1) Check the checkbox to enable the function. NTP

(2) Configure the following settings:

Server Address: IP address of NTP server.

NTP Port: Port of NTP server.

Interval: The time interval between the two synchronizing actions with NTP

server.

User Manual of Network Camera

Figure 6-3 Time Sync by NTP Server

Note: If the camera is connected to a public network, you should use a NTP server

that has a time synchronization function, such as the server at the National Time

Center (IP Address: 210.72.145.44). If the camera is set in a customized network,

NTP software can be used to establish a NTP server for time synchronization.

 Synchronizin Time Synchronization Manually g

Enable the Manual Time Sync function and then click to set the system time

from the pop-up calendar.

Note: You can also check the Sync with computer time checkbox to synchronize the

time of the camera with that of your computer.

Figure 6-4 Time Sync Manually

 Click the tab page to enable the DST function and Set the date of the DST DST

period.

Figure 6-5 DST Settings

2. Click to save the settings. Save

User Manual of Network Camera

6.3 Configuring Network Settings

6.3.1 Configuring TCP/IP Settings

Purpose:

TCP/IP settings must be properly configured before you operate the camera over

network. The camera supports both the IPv4 and IPv6. Both versions may be

configured simultaneously without conflicting to each other, and at least one IP

version should be configured.

Steps:

1. Enter TCP/IP Settings interface:

Configuration > Basic Configuration > Network > TCP/IP

Or Configuration > Advanced Configuration > Network > TCP/IP

Figure 6-6 TCP/IP Settings

2. Configure the basic network settings, including the NIC Type, IPv4 or IPv6

Address, IPv4 or IPv6 Subnet Mask, IPv4 or IPv6 Default Gateway, MTU settings

User Manual of Network Camera

and Multicast Address.

3. (Optional) Check the checkbox of , and then the Enable Multicast Discovery

online network camera can be automatically detected by client software via

private multicast protocol in the LAN.

4. Click to save the above settings Save .

Notes :

 The valid value range of MTU is 1280 ~ 1500.

 The Multicast sends a stream to the multicast group address and allows multiple

clients to acquire the stream at the same time by requesting a copy from the

multicast group address. Before utilizing this function, you have to enable the

Multicast function of your router.

 A reboot is required for the settings to take effect.

6.3.2 Configuring Port Settings

Purpose:

You can set the port No. of the camera, e.g. HTTP port, RTSP port and HTTPS port.

Steps:

1. Enter the Port Settings interface:

Configuration > Basic Configuration > Network > Port

Or Configuration > Advanced Configuration > Network > Port

Figure 6-7 Port Settings

2. Set the HTTP port, RTSP port, HTTPS port and server port of the camera.

HTTP Port: The default port number is 80, and it can be changed to any port No.

which is not occupied.

RTSP Port: The default port number is 554 and it can be changed to any port No.

User Manual of Network Camera

ranges from 1024 to 65535.

HTTPS Port: The default port number is 443, and it can be changed to any port

No. which is not occupied.

Server Port: The default server port number is 8000, and it can be changed to

any port No. ranges from 2000 to 65535.

3. Click to save the settings. Save

Note: A reboot is required for the settings to take effect.

6.3.3 Conﬁguring PPPoE Settings

Steps:

1. Enter the PPPoE Settings interface:

Conﬁguration >Advanced Conﬁguration > Network > PPPoE

Figure 6-8 PPPoE Settings

2. Check the checkbox to enable this feature. Enable PPPoE

3. Enter , , and password for PPPoE access. User Name Password Conﬁrm

Note: The User Name and Password should be assigned by your ISP.

 For your privacy and to better protect your system against security risks, we

strongly recommend the use of strong passwords for all functions and network

devices. The password should be something of your own choosing (using a

minimum of 8 characters, including upper case letters, lower case letters,

numbers and special characters) in order to increase the security of your product.

 Proper conﬁguration of all passwords and other security settings is the

responsibility of the installer and/or end-user.

4. Click to save and exit the interface. Save

User Manual of Network Camera

Note: A reboot is required for the settings to take eﬀect.

6.3.4 Conﬁguring DDNS Settings

Purpose:

If your camera is set to use PPPoE as its default network connection, you can use the

Dynamic DNS (DDNS) for network access.

Before you start:

Registration on the DDNS server is required before conﬁguring the DDNS settings of

the camera.

 For your privacy and to better protect your system against security risks, we

strongly recommend the use of strong passwords for all functions and network

devices. The password should be something of your own choosing (using a

minimum of 8 characters, including upper case letters, lower case letters,

numbers and special characters) in order to increase the security of your product.

 Proper conﬁguration of all passwords and other security settings is the

responsibility of the installer and/or end-user.

Steps:

1. Enter the DDNS Settings interface:

Conﬁguration > Advanced Conﬁguration > Network > DDNS

Figure 6-9 DDNS Settings

2. Check the checkbox to enable this feature. Enable DDNS

3. Select . Four DDNS types are selectable: HiDDNS, IPServer, -IP, DDNS Type NO

User Manual of Network Camera

and DynDNS.



 DynDNS:

Steps:

(1) Enter of DynDNS (e.g. members.dyndns.org). Server Address

(2) In the text ﬁeld, enter the domain name obtained from the DynDNS Domain

website.

(3) Enter the of DynDNS server. Port

(4) Enter the and registered on the DynDNS website. User Name Password

(5) Click to save the settings. Save

Figure 6-10 DynDNS Settings



 IP Server:

Steps:

(1) Enter the Server Address of the IP Server.

(2) Click to save the settings. Save

Note: For the IP Server, you have to apply a static IP, subnet mask, gateway and

preferred DNS from the ISP. The should be entered with the Server Address

static IP address of the computer that runs the IP Server software.

Figure 6-11 IPServer Settings

User Manual of Network Camera

Note: For the US and Canada area, you can enter 173.200.91.74 as the server

address.



 NO-IP:

Steps:

(1) Choose the DDNS Type as NO-IP.

Figure 6-12 -IP Settings NO

(2) Enter the Server Address as www.noip.com

(3) Enter the Domain name you registered.

(4) Enter the Port number, if needed.

(5) Enter the User Name and Password.

(6) Click and then you can view the camera with the domain name. Save



 HiDDNS

Steps:

(1) Choose the DDNS Type as HiDDNS.

Figure 6-13 HiDDNS Settings

(2) Enter the Server Address www.hik-online.com.

(3) Enter the Domain name of the camera. The domain is the same with the

device alias in the HiDDNS server.

User Manual of Network Camera

(4) Click to save the new settings. Save

Note: A reboot is required for the settings to take eﬀect.

6.3.5 Conﬁguring SNMP Settings

Purpose:

You can set the SNMP function to get camera status, parameters and alarm related

information and manage the camera remotely when it is connected to the network.

Before you start:

Before setting the SNMP, please download the SNMP software and manage to

receive the camera information via SNMP port. By setting the Trap Address, the

camera can send the alarm event and exception messages to the surveillance center.

Note: The SNMP version you select should be the same as that of the SNMP software.

And you also need to use the diﬀerent version according to the security level you

required. SNMP v1 provides no security and SNMP v2 requires password for access.

And SNMP v3 provides encryption and if you use the third version, HTTPS protocol

must be enabled.

 For your privacy and to better protect your system against security risks, we

strongly recommend the use of strong passwords for all functions and network

devices. The password should be something of your own choosing (using a

minimum of 8 characters, including upper case letters, lower case letters,

numbers and special characters) in order to increase the security of your product.

 Proper conﬁguration of all passwords and other security settings is the

responsibility of the installer and/or end-user.

Steps:

1. Enter the SNMP Settings interface:

Conﬁguration > Advanced Conﬁguration > Network > SNMP

User Manual of Network Camera

Figure 6-14 SNMP Settings

2. Check the corresponding version checkbox ( ,

, ) to enable the feature.

3. Conﬁgure the SNMP settings.

Note: The settings of the SNMP software should be the same as the settings you

conﬁgure here.

4. Click to save and ﬁnish the settings. Save

Note: A reboot is required for the settings to take eﬀect.

6.3.6 Conﬁguring 802.1X Settings

Purpose:

User Manual of Network Camera

The IEEE 802.1X standard is supported by the network cameras, and when the feature

is enabled, the camera data is secured and user authentication is needed when

connecting the camera to the network protected by the IEEE 802.1X.

Before you start:

The authentication server must be conﬁgured. Please apply and register a user name

and password for 802.1X in the server.

 For your privacy and to better protect your system against security risks, we

strongly recommend the use of strong passwords for all functions and network

devices. The password should be something of your own choosing (using a

minimum of 8 characters, including upper case letters, lower case letters,

numbers and special characters) in order to increase the security of your product.

 Proper conﬁguration of all passwords and other security settings is the

responsibility of the installer and/or end-user.

Steps:

1. Enter the 802.1X Settings interface:

Conﬁguration > Advanced Conﬁguration > Network > 802.1X

Figure 6-15 802.1X Settings

2. Check the checkbox to enable the feature. Enable IEEE 802.1X

3. Conﬁgure the 802.1X settings, including EAPOL version, user name and

password.

Note: The EAPOL version must be identical with that of the router or the switch.

4. Enter the user name and password to access the server.

User Manual of Network Camera

5. Click to ﬁnish the settings. Save

Note: A reboot is required for the settings to take eﬀect.

6.3.7 Conﬁguring QoS Settings

Purpose:

QoS (Quality of Service) can help solve the network delay and network congestion by

conﬁguring the priority of data sending.

Steps:

1. Enter the QoS Settings interface:

Conﬁguration >Advanced Conﬁguration > Network > QoS

Figure 6-16 QoS Settings

2. Conﬁgure the QoS settings, including video / audio DSCP, event / alarm DSCP

and Management DSCP.

The valid value range of the DSCP is 0-63. The bigger the DSCP value is, the

higher the priority is.

Note: DSCP refers to the Diﬀerentiated Service Code Point; and the DSCP value

is used in the IP header to indicate the priority of the data.

3. Click to save the settings. Save

Note: A reboot is required for the settings to take effect.

6.3.8 Configuring UPnP™ Settings

Universal Plug and Play (UPnP™) is a networking architecture that provides

compatibility among networking equipment, software and other hardware devices.

The UPnP protocol allows devices to connect seamlessly and to simplify the

implementation of networks in the home and corporate environments.

User Manual of Network Camera

With the function enabled, you don’t need to configure the port mapping for each port,

and the camera is connected to the Wide Area Network via the router.

Steps:

1. Enter the UPnP™ settings interface.

Conﬁguration >Advanced Conﬁguration > Network > UPnP

2. Check the checkbox to enable the UPnP™ function.

The name of the device when detected online can be edited.

Figure 6-17 UPnP Settings

6.3.9 Conﬁguring Wireless Dial Settings

Purpose:

Data stream of audio, video and image can be transferred via 3G / 4G wireless

network.

Note: The wireless dial function requires the support of the camera.

1. Click the Wireless Dial tab to enter the Wireless Dial conﬁguration interface.

2. Check the checkbox of to enable the wireless dial settings. Enable

3. Conﬁgure the dial parameters.

1) Select the dial mode from the drop-down list. Auto and Manual are selectable.

If Auto is selected, you can set the arming schedule for dialing; If Manual is

selected, you can set the oﬄine time and manual dialing parameters.

2) Set the access number, user name, password, APN, MTU and veriﬁcation

protocol. You can also leave these parameters blank, and the device will

adopt the default settings for dialing after other parameters are conﬁgured.

 For your privacy and to better protect your system against security risks,

User Manual of Network Camera

we strongly recommend the use of strong passwords for all functions and

network devices. The password should be something of your own

choosing (using a minimum of 8 characters, including upper case letters,

lower case letters, numbers and special characters) in order to increase

the security of your product.

 Proper configuration of all passwords and other security settings is the

responsibility of the installer and/or end-user.

3) Select the network mode from the drop-down list. Auto, 3G and 4G are

selectable. If Auto is selected, the network selection priority comes as: 4G >

3G > Wired Network.

4) Input the offline time if Manual is selected as the dial mode.

5) Input the UIM Number (Mobile Phone Number).

6) Click the button to set the arming schedule if Auto is selected as the dial Edit

mode.

7) Click to save the settings. Save

User Manual of Network Camera

Figure 6-18 Dial Parameters

4. View the dial status.

1) Click the button to view the dial status including real-time mode, Refresh

UIM status, signal strength, etc.

2) If Manual is selected as the dial mode, you can also manually connect /

disconnect the wireless network.

Figure 6-19 Dial Status

5. Set the white list.

1) Check the checkbox of . Enable SMS Alarm

The mobile phone number on the white list can receive the alarm message

from the device and reboot the device via SMS.

Note: Up to 8 mobile phone numbers can be added on the white list.

Figure 6-20 White List Settings

2) Select the item on the white list, and click the button to enter the SMS Edit

Alarm Settings interface.

User Manual of Network Camera

Figure 6-21 SMS Alarm Settings

3) Input the mobile phone number for the white list, check the checkbox of

Reboot via SMS, select the alarm for SMS push, and click OK.

Note: To reboot the device via SMS, send the message "reboot" to the device,

and the device will reply a message "reboot success" after rebooting

succeeded.

4) (Optional) You can click to send a message to the mobile Send Test SMS

phone for test.

5) Click to save the settings. Save

6.3.10 Email Sending Triggered by Alarm

Purpose:

The system can be configured to send an Email notification to all designated receivers

if an alarm event is detected, e.g., motion detection event, video loss, video tampering,

etc.

Before you start:

Please configure the DNS Server settings under sic Configuration > Network > Ba

TCP/IP Advanced Configuration > Network > TCP/IPor before using the Email

function.

Steps:

1. Enter the TCP/IP Settings (Configuration > Basic Configuration > Network >

TCP/IP Configuration > Advanced Configuration > Network > TCP/IP) or to

User Manual of Network Camera

set the IPv4 Address, IPv4 Subnet Mask, IPv4 Default Gateway and the Preferred

DNS Server.

Note: Please refer to for detailed Conﬁguring TCP/IP SettingsSection 6.3.1

information.

2. Enter the Email Settings interface:

Configuration > Advanced Configuration > Network > Email

Figure 6-22 Email Settings

3. Configure the following settings:

Sender: The name of the email sender.

Sender’s Address: The email address of the sender.

SMTP Server: The SMTP Server IP address or host name (e.g.,

smtp.263xmail.com).

SMTP Port: The SMTP port. The default TCP/IP port for SMTP is 25 (not

secured). And the SSL SMTP port is 465.

Enable SSL: Check the checkbox to enable SSL if it is required by the SMTP

server.

User Manual of Network Camera

Attached Image: Check the checkbox of Attached Image if you want to send

emails with attached alarm images.

Interval: The interval refers to the time between two actions of sending attached

pictures.

Authentication (optional): If your email server requires authentication, check

this checkbox to use authentication to log in to this server and enter the login user

Name and password.

 For your privacy and to better protect your system against security risks, we

strongly recommend the use of strong passwords for all functions and

network devices. The password should be something of your own choosing

(using a minimum of 8 characters, including upper case letters, lower case

letters, numbers and special characters) in order to increase the security of

your product.

 Proper configuration of all passwords and other security settings is the

responsibility of the installer and/or end-user.

Choose Receiver: Select the receiver to which the email is sent. Up to 2 receivers

can be configured.

Receiver: The name of the user to be notified.

Receiver’s Address: The email address of user to be notified.

4. Click to save the settings. Save

6.3.11 Configuring NAT (Network Address Translation) Settings

Purpose:

1. Enter the NAT settings interface.

Configuration >Advanced Configuration > Network > NAT

2. Choose the port mapping mode.

To port mapping with the default port numbers:

Choose Port Mapping Mode as Auto .

User Manual of Network Camera

To port mapping with the customized port numbers:

Choose Port Mapping Mode as . Manual

And for manual port mapping, you can customize the value of the port number by

yourself.

Figure 6-23 Configure NAT Settings

3. Click to save the settings. Save

6.3.12 Configuring FTP Settings

Purpose:

You can configure the FTP server related information to enable the uploading of the

captured pictures to the FTP server. The captured pictures can be triggered by events

or a timing snapshot task.

Steps:

1. Enter the FTP Settings interface:

Configuration >Advanced Configuration > Network > FTP

Figure 6-24 FTP Settings

2. Configure the FTP settings; and the user name and password are required for

User Manual of Network Camera

 For your privacy and to better protect your system against security risks, we

strongly recommend the use of strong passwords for all functions and

network devices. The password should be something of your own choosing

(using a minimum of 8 characters, including upper case letters, lower case

letters, numbers and special characters) in order to increase the security of

your product.

 Proper configuration of all passwords and other security settings is the

responsibility of the installer and/or end-user.

Directory Directory Structure: In the field, you can select the root directory,

parent directory and child directory. When the parent directory is selected, you

have the option to use the Device Name, Device Number or Device IP for the

name of the directory; and when the Child Directory is selected, you can use the

Camera Name or Camera No. as the name of the directory.

Upload type: To enable uploading the captured picture to the FTP server.

Anonymous Access to the FTP Server (in which case the user name and

password won’t be required.) Anonymous: Check the checkbox to enable the

anonymous access to the FTP server.

Note: The anonymous access function must be supported by the FTP server.

3. Click to save the settings. Save

Note: If you want to upload the captured pictures to FTP server, you have to

enable the timing snapshot or event-triggered snapshot on page. For Snapshot

detailed information, please refer to the Section 7.3.

6.3.13 Platform Access

Platform access provides you an option to manage the devices via EZVIZ Cloud P2P

platform.

Note: Platform access function varies according to the camera model and it requires

User Manual of Network Camera

for the support of the camera.

Check the checkbox of to enable the EZVIZ Cloud P2P, and you are able to Enable

manage the device via EZVIZ Cloud P2P website, or EZVIZ Cloud P2P client, which

is a mobile phone app.

For some users don’t want to manage the devices via EZVIZ Cloud P2P, you can just

simply leave the checkbox unchecked.

Figure 6-25 Platform Access

6.3.14 HTTPS Settings

Purpose:

HTTPS provides authentication of the web site and associated web server that one is

communicating with, which protects against Man- -the-middle attacks. Perform the in

following steps to set the port number of https.

E.g.: If you set the port number as 443 and the IP address is 192.168.1.64, you may

access the device by inputting https://192.168.1.64:443 via the web browser.

Steps:

1. Enter the HTTPS settings interface.

Configuration > Advanced Configuration > Network > HTTPS

2. Check the checkbox of Enable HTTPS to enable the function.

3. Create the self-signed certificate or authorized certificate.

User Manual of Network Camera

Figure 6-26 HTTPS Settings



 Create the self-signed certificate

1) Click Create button to enter the creation interface.

Figure 6-27 Create Self-signed Certificate

2) Enter the country, host name/IP, validity and other information.

3) Click to save the settings. OK

Note: If you already had a certificate installed, the Create Self-signed

Certificate is grayed out.

User Manual of Network Camera



 Create the authorized certiﬁcate

1) Click Create button to create the certiﬁcate request.

2) Download the certiﬁcate request and submit it to the trusted certiﬁcate

authority for signature.

3) After receiving the signed valid certiﬁcate, import the certiﬁcate to the device.

4. There will be the certiﬁcate information after you successfully create and install

the certiﬁcate.

Figure 6-28 Installed Certiﬁcate

5. Click the button to save the settings. Save

6.4 Conﬁguring Video and Audio Settings

6.4.1 Conﬁguring Video Settings

Steps:

1. Enter the Video Settings interface:

Conﬁguration >Basic Conﬁguration > Video / Audio > Video

Or Conﬁguration > Advanced Conﬁguration > Video / Audio > Video

User Manual of Network Camera

Figure 6-29 Video Settings

2. Select the Stream Type of the camera to main stream (normal), sub-stream or third

stream.

The main stream is usually for recording and live viewing with good bandwidth,

and the sub-stream and third stream can be used for live viewing when the

bandwidth is limited.

3. You can customize the following parameters for the selected main stream or

sub-stream:

Video Type:

Select the stream type to video stream, or video & audio composite stream. The

audio signal will be recorded only when the Video Type Video & Audio is .

Resolution:

Select the resolution of the video output.

Bitrate Type:

Select the bitrate type to constant or variable.

Video Quality:

When bitrate type is selected as Variable, 6 levels of video quality are selectable.

Frame Rate:

Set the frame rate to 1/16~25 fps. The frame rate is to describe the frequency at

User Manual of Network Camera

which the video stream is updated and it is measured by frames per second (fps).

A higher frame rate is advantageous when there is movement in the video stream,

as it maintains image quality throughout.

Max. Bitrate:

Set the max. bitrate to 32~16384 Kbps. The higher value corresponds to the higher

video quality, but the higher bandwidth is required.

Note: The maximum limit of the max. bitrate value varies according to different

camera platforms. For some certain cameras, the maximum limit is 8192Kbps or

12288Kbps.

Video Encoding:

If the Stream Type set to main stream: H.264 and MPEG4 are selectable; if the is

stream type is set to sub stream or third stream, H.264, MJPEG, and MPEG4 are

selectable.

Note: The video encoding type varies according to different camera platforms. For

some certain cameras, H.265 is supported while MPEG4 is not.

Profile:

Basic profile, Main Profile and High Profile for coding are selectable.

I Frame Interval:

Set the I-Frame interval to 1~400.

SVC:

Scalable Video Coding is an extension of the H.264/AVC standard. Select OFF /

ON to disable / enable the SVC function. Select Auto, and the device will

automatically extract frames from the original video when the network bandwidth

is insufficient.

Smoothing:

It refers to the smoothness of the stream. The higher value of the smoothing, the

better fluency of the stream, though, the video quality may not be so satisfied. The

lower value of the smoothing, the higher quality of the stream, though it may

appear not fluent.

4. Click to save the settings. Save

User Manual of Network Camera

6.4.2 Conﬁguring Audio Settings

Steps:

1. Enter the Audio Settings interface

Conﬁguration > Basic Conﬁguration > Video / Audio > Audio

Or Conﬁguration > Advanced Conﬁguration > Video / Audio > Audio

Figure 6-30 Audio Settings

2. Conﬁgure the following settings.

Note: Audio settings vary according to different camera models.

Audio Encoding: G.722.1, G.711 ulaw, G.711alaw, G.726, MP2L2 and PCM are

selectable. For MP2L2, the sampling rate and audio stream bitrate are

conﬁgurable; for PCM, the sampling rate can be set.

Audio Input: MicIn and LineIn are selectable for the connected microphone and

pickup respectively.

Input Volume: 0-100

Environmental Noise Filter: Set it as OFF or ON. When the function is enabled,

the noise in the environment can be ﬁltered to some extent.

3. Click to save the settings. Save

6.4.3 Conﬁguring ROI Encoding

Purpose:

ROI (Region of Interest) encoding helps to discriminate the ROI and background

information in video compression, which means, the technology assigns more

encoding resource to the region of interest, thus to increase the quality of the ROI

User Manual of Network Camera

whereas the background information is less focused.

Note: ROI function varies according to different camera models.

Figure 6-31 Region of Interest Settings

Conﬁguring Fixed Region for ROI:

Steps:

1. Enter the ROI settings interface:

Conﬁguration> Advanced Conﬁguration> Video/Audio> ROI

2. Check the checkbox of under Fixed Region item. Enable

3. Select the stream type for ROI encoding.

4. Select the region from the drop-down list for ROI settings. There are four fixed

regions selectable.

User Manual of Network Camera

5. Click the Draw Area button, and then click-and-drag the mouse to draw the

region of interest on the live video.

6. Select the ROI level to set the image quality enhancing level. The larger the value

is, the better the image quality is.

7. Input the region name for ROI as desired.

8. Click to save the settings. Save

Conﬁguring Dynamic Region for ROI:

1. Enter the ROI settings interface:

Conﬁguration> Advanced Conﬁguration> Video/Audio> ROI

2. Check the checkbox of Enable Face Tracking, and then the captured face picture

is set as region of interest.

Note: To enable face tracking function, the face detection function should be

supported and enabled.

3. Check the checkbox of Enable License Plate Tracking, and then the captured

license plate picture is set as region of interest.

Note: To enable license plate tracking function, the vehicle detection function

should be supported and enabled.

4. Respectively set the ROI level. The larger the value is, the better the image

quality is.

5. Select the stream type for ROI encoding.

6. Click to save the settings. Save

6.4.4 Display Information on Stream

Check the checkbox of , and the information of the object (e.g. Enable Dual-VCA s

human, vehicle, etc.) will be marked in the video stream. And then you can set rules

on the connected rear-end device to detect the events including line crossing, intrusion,

etc.

User Manual of Network Camera

Figure 6-32 Display Info. on Stream

6.4.5 Conﬁguring Target Cropping

Purpose:

You can specify a target area on the live video, and then can be displayed via the it

third stream in some certain resolution, thus providing more details of the target area

if needed.

Note: Target cropping function varies according to diﬀerent camera models.

Steps:

1. Enter the Target Cropping settings interface:

Conﬁguration> Advanced Conﬁguration> Video/Audio> Target Cropping.

2. Check the checkbox of Enable Target Cropping to enable the function.

3. Set Third Stream as the stream type.

4. Select the cropping resolution for the video display of target area. A red rectangle

is displayed on the live video to mark the target area, and you can click-and-drag

the rectangle to locate the target area as desired.

5. Click to save the settings. You can go to the Live View page and click the Save

Third Stream tab to view the video of the target area.

User Manual of Network Camera

Figure 6-33 Target Cropping

6.5 Conﬁguring Image Parameters

6.5.1 Conﬁguring Display Settings

Purpose:

You can set the image quality of the camera, including brightness, contrast, saturation,

hue, sharpness, etc.

Note: The display parameters vary according to the different camera model. Please

refer to the actual interface for details.

Steps:

1. Enter the Display Settings interface:

Conﬁguration > Basic Conﬁguration> Image> Display Settings

Or Conﬁguration > Advanced Conﬁguration> Image> Display Settings

2. Set the image parameters of the camera.

Note: In order to guarantee the image quality in the diﬀerent illumination, it provides

two sets of parameters for user to conﬁgure.

Day/Night Auto-switch

User Manual of Network Camera

Figure 6-34 Display Settings of Day/night Auto-switch

 Image Adjustment

Brightness describes bright of the image, which ranges from 1~100, and the default

value is 50.

Contrast describes the contrast of the image, which ranges from 1~100, and the

default value is 50.

Saturation describes the colorfulness of the image color, which ranges from 1~100,

and the default value is 50.

Sharpness describes the edge contrast of the image, which ranges from 1~100, and

the default value is 50.

 Exposure Settings

If the camera is equipped with the ﬁxed lens, only is selectable, and the iris Manual

mode is not conﬁgurable.

If is selected, you can set the auto iris level from 0~ 100. Auto

For the camera supports lens, if P-Iris lens is adopted, then the P-Iris lens type P-Iris

is selectable, e.g.: Tamron 2.8-8mm F1.2 (M13VP288- ), or if DC lens is adopted, IR

then manual and auto are selectable.

The exposure time refers to the electronic shutter time, which ranges from 1 ~

User Manual of Network Camera

1/100,000s. Adjust it according to the actual luminance condition.

 Focus Settings

For the camera supports electronic lens, you can set the focus mode as Auto, Manual

or Semi-auto. If auto is selected, the focus is adjusted automatically according to the

actual monitoring scenario; if manual is selected, you can control the lens by adjusting

the zoom, focus, lens initialization, and auxiliary focus via the PTZ control interface;

if semi-auto is selected, the camera will focus automatically when you adjust the

zoom parameters.

 Day/Night Switch

Select the day/night switch mode, and conﬁgure the smart IR settings from this

option.

Figure 6-35 Day/Night Switch

Day, night, auto, schedule, and triggered by alarm input are selectable for day/night

switch.

Day: the camera stays at day mode.

Night: the camera stays at night mode.

Auto: the camera switches between the day mode and the night mode according to the

illumination automatically. The sensitivity ranges from 0~7, the higher the value is,

the easier the mode switches. The ﬁltering time refers to the interval time between the

day/night switch. You can set it from 5s to 120s.

Schedule: Set the start time and the end time to deﬁne the duration for day/night

mode.

Triggered by alarm input: The switch is triggered by alarm input, and you can set

User Manual of Network Camera

the triggered mode to day or night.

Smart IR: Smart IR function gives user an option to adjust the power of the IR LED,

thus providing a clear image that is not overexposed or too dark. Select ON to enable

the smart IR, and then Auto and Manual are selectable for IR mode.

Select AUTO, and the power of IR LED changes automatically according to the actual

luminance. E.g.: if the current scene is bright enough, then the IR LED adjusts itself

to lower power; and if the scene is not bright enough, the IR LED adjusts itself to

higher power.

Select Manual, and u can manually set the value of distance between the IR camera yo

and object, to adjust the power of IR LED. Small distance value indicates the object is

near the IR camera, and the device adjusts the IR LED to lower power to avoid

overexposure; large distance value indicates the object is far away, and the device

adjusts the IR LED to higher power to avoid too dark image.

 Backlight Settings

BLC: If you focus on an object against strong backlight, the object will be too dark to

be seen clearly. BLC compensates light to the object in the front to make it clear. OFF,

Up, Down, Left, Right, Center and customize are selectable.

WDR: Wide Dynamic Range can be used when there is a high contrast of the bright

area and the dark area of the scene.

HLC: High Light Compression function can be used when there are strong lights in

the scene affecting the image quality.

 White Balance

White balance is the white rendition function of the camera used to adjust the color

temperature according to the environment.

User Manual of Network Camera

Figure 6-36 White Balance

 Image Enhancement

Digital Noise Reduction: DNR reduces the noise in the video stream. OFF, Normal

Mode and Expert Mode are selectable. Set the DNR level from 0~100, and the default

value is 50 in Normal Mode. Set the DNR level from both space DNR level [0~100]

and time DNR level [0~100] in Expert Mode.

Defog Mode: You can enable the defog function when the environment is foggy and

the image is misty. It enhances the subtle details so that the image appears clearer.

Electrical Image Stabilizer: EIS reduces the effects of vibration in a video.

Grey Scale: You can choose the range of the grey scale as [0-255] or [16-235].

 Video Adjustment

Mirror : It mirrors the image so you can see it inversed. Left/Right, Up/Down, Center,

and OFF are selectable.

Rotate : To make a complete use of the 16:9 aspect ratio, you can enable the rotate

function when you use the camera in a narrow view scene.

When installing, turn the camera to the 90 degrees or rotate the 3-axis lens to 90

degrees, and set the rotate mode as on, you will get a normal view of the scene with

9:16 aspect ratio to ignore the needless information such as the wall, and get more

meaningful information of the scene.

Scene Mode: Choose the scene as indoor or outdoor according to the real

environment.

Video Standard: 50 Hz and 60 Hz are selectable. Choose according to the different

video standards; normally 50 Hz for PAL standard and 60 Hz for NTSC standard.

Capture Mode: It’s the selectable video input mode to meet the different demands of

field of view and resolution.

Lens Distortion Correction: Select ON / OFF to enable / disable the lens distortion

correction. The distorted image caused by the wide-angle lens can be corrected if this

function enabled.

 Other

User Manual of Network Camera

Some of the camera supports CVBS, SDI, or HDMI output. Please refer to the actual

camera model for details.

Day/Night Scheduled-Switch

Day/Night scheduled-switch configuration interface enables you to set the separate

camera parameters for day and night to guarantee the image quality in different

illumination.

Figure 6-37 Day/Night Scheduled-Switch Configuration Interface

Steps:

1. Click the time line to select the start time and the end time of the switch.

2. Click Common tab to configure the common parameters applicable to the day

mode and night mode.

Note: The detailed information of each parameter please refers day/night auto to

switch session.

3. Click Day tab to configure the parameters applicable for day mode.

4. Click Night tab to configure the parameters applicable for night mode.

Note: The settings saved automatically if any parameter is changed.

6.5.2 Configuring OSD Settings

Purpose:

User Manual of Network Camera

You can customize the camera name and time on the screen.

Steps:

1. Enter the OSD Settings interface:

Configuration > Advanced Configuration > Image > OSD Settings

Figure 6-38 OSD Settings

2. Check the corresponding checkbox to select the display of camera name, date or

week if required.

3. Edit the camera name in the text field of . Camera Name

4. Select from the drop-down list to set the time format, date format, display mode

and the OSD font size.

5. Define the font color of the OSD by clicking the drop-down, and black & white

self-adaptive and custom are selectable.

Figure 6-39 Font Color-Custom

6. You can use the mouse to click and drag the text frame in the

User Manual of Network Camera

live view window to adjust the OSD position.

Figure 6-40 Adjust OSD Location

7. ick to activate the above settings. Cl Save

6.5.3 Configuring Text Overlay Settings

Purpose:

You can customize the text overlay.

Steps:

1. Enter the Text Overlay Settings interface:

Configuration > Advanced Configuration > Image > Text Overlay

User Manual of Network Camera

Figure 6-41 Text Overlay

2. Check the checkbox in front of textbox to enable the on-screen display.

3. Input the characters in the textbox.

4. (Optional)Use the mouse to click and drag the red text frame in the live

view window to adjust the text overlay position.

5. Click to save the settings. Save

Note: Up to 8 text overlays are configurable.

6.5.4 Configuring Privacy Mask

Purpose:

Privacy mask enables you to cover certain areas on the live video to prevent certain

spots in the surveillance area from being live viewed and recorded.

Steps:

1. Enter the Privacy Mask Settings interface:

Configuration > Advanced Configuration> Image > Privacy Mask

2. Check the checkbox of to enable this function. Enable Privacy Mask

3. Click Draw Area.

Figure 6-42 Privacy Mask Settings

4. Click and drag the mouse in the live video window to draw the mask area.

User Manual of Network Camera

Note: You are allowed to draw up to 4 areas on the same image.

5. Click Stop Drawing to finish drawing or click to clear all of the areas Clear All

you set without saving them.

6. Click to save the settings. Save

6.5.5 Configuring Picture Overlay

Purpos e:

Picture overlay enables you to overlay a picture on the image. This function enables a

certain enterprise or users to overlay their logo on the image.

Note: The picture must be in RGB24 bmp format and the maximum size of the picture

is 128*128.

Steps:

1. Enter the Picture Overlay Settings interface:

Configuration > Advanced Configuration> Image > Picture Overlay

Figure 6-43 cture Overlay Pi

2. Click to select a picture. Browse

3. Click to upload it. Upload

4. Check checkbox to enable the function. Enable Picture Overlay

X Coordinate and Y Coordinate values are for the location of the picture on the image.

And the Picture width and height shows the size of the picture.

User Manual of Network Camera

6.6 Configuring and Handling Alarms

This section explains how to configure the network camera to respond to alarm events,

including motion detection, video tampering, alarm input, alarm output, exception,

face detection, audio exception detection, intrusion detection, defocus detection, and

scene change detection, etc. These events can trigger the linkage methods, such as

Notify Surveillance Center, Send Email, Trigger Alarm Output, etc.

Notes :

 Check the checkbox of Notify Surveillance Center if you want the alarm

information to be pushed to PC or mobile client software as soon as the alarm is

triggered.

 Click for help when you configure the intelligent functions, including face

detection, audio exception detection, intrusion detection, defocus detection, scene

change detection, etc. A help document will guide you to go through the

configuration steps.

6.6.1 Configuring Motion Detection

Purpose:

Motion detection detects the moving objects in the configured surveillance area, and a

series of actions can be taken when the alarm is triggered..

In order to detect the moving objects accurately and reduce the false alarm rate,

normal configuration and expert configuration are selectable for different motion

detection environment.

 Normal Configuration

Normal configuration adopts the same one set of motion detection parameters in the

day and at night. time

Tasks:

1. Set the Motion Detection Area.

Steps:

User Manual of Network Camera

(1)Enter the motion detection settings interface

Configuration > Advanced Configuration> Basic Event > Motion

Detection

(2)Check the checkbox of . Enable Motion Detection

(3)Check the checkbox of Enable Dynamic Analysis for Motion if you want to

mark the detected objects with green rectangles.

Note: Select Disable for rules if you don’t want the detected objected

displayed with the rectangles. Select disable from Configuration-Local

Configuration-Live View Parameters-rules.

Figure 6-44 Enable Motion Detection

(4)Click Draw Area. Click and drag the mouse on the live video to draw a

motion detection area.

(5)Click Stop Drawing to finish drawing one area.

(6)(Optional) Click Clear All clear all of the areas. to

(7)(Optional) Move the slider to set the sensitivity of the detection.

2. Set the Arming Schedule for Motion Detection.

Steps:

User Manual of Network Camera

Figure 6-45 Arming Time

(1)Click to edit the arming schedule. The Figure 6-34 shows the editing Edit

interface of the arming schedule.

(2)Choose the day you want to set the arming schedule.

(3)Click to set the time period for the arming schedule.

(4)(Optional) After you set the arming schedule, you can copy the schedule to

other days.

(5)Click to save the settings. OK

Note: The time of each period can’t be overlapped. Up to 8 periods can be

configured for each day.

Figure 6-46 Arming Time Schedule

User Manual of Network Camera

3. Set the Alarm Actions for Motion Detection.

Check the checkbox to select the linkage method. Notify surveillance center,

send email, upload to FTP, trigger channel and trigger alarm output are selectable.

You can specify the linkage method when an event occurs.

Figure 6-47 Linkage Method

 Audible Warning

Trigger the audible warning locally. And it only supported by the device have

the audio output.

 Notify Surveillance Center

Send an exception or alarm signal to remote management software when an

event occurs.

 Send Email

Send an email with alarm information to a user or users when an event occurs.

Note: To send the Email when an event occurs, you need to refer to Section

6.3.10 Email Sending Triggered by Alarm to set the related parameters.

 Upload to FTP

Capture the image when an alarm is triggered and upload the picture to a FTP

server.

Notes:

 Set the FTP address and the remote FTP server first. Refer to Section 6.3.12

Configuring FTP Settings for detailed information.

 Go to Advanced Configuration > Storage > Snapshot page, enable the

event-triggered snapshot, and set the capture interval and capture number.

User Manual of Network Camera

 The captured image can also be uploaded to the available SD card or network

disk.

 Trigger Channel

The video will be recorded when the motion is detected. You have to set the

recording schedule to realize this function. Please refer to for Section 7.2

detailed information.

 Trigger Alarm Output

Trigger one or more external alarm outputs when an event occurs.

Note: To trigger an alarm output when an event occurs, please refer to Section

6.6.4 Configuring Alarm Output to set the related parameters.

 Expert Configuration

Expert mode is mainly used to configure the sensitivity and proportion of object on

area of each area for different day/night switch.

Figure 6-48 Expert Mode of Motion Detection

 Day/Night Switch OFF

Steps:

(1)Draw the detection area as in the normal configuration mode. Up to 8 areas are

supported.

(2)Select for . OFF Switch Day and Night Settings

User Manual of Network Camera

(3)Select the area by clicking the area No..

(4)Slide the cursor to adjust the sensitivity and proportion of object on the area

for the selected area.

(5)Set the arming schedule and linkage method as in the normal configuration

mode.

(6)Click to save the settings. Save

 Day/Night Auto-Switch

Steps:

(1)Draw the detection area as in the normal configuration mode. Up to 8 areas are

supported.

(2)Select Auto-Switch Switch Day and Night Settings for .

Figure 6-49 Day/Night Auto-Switch

(3)Select the area by clicking the area No.

(4)Slide the cursor to adjust the sensitivity and proportion of object on the area

for the selected area in the daytime.

(5)Slide the cursor to adjust the sensitivity and proportion of object on the area

for the selected area at night.

(6)Set the arming schedule and linkage method as in the normal configuration

User Manual of Network Camera

mode.

(7)Click to save the settings. Save

 Day/Night Scheduled-Switch

(1)Draw the detection area as in the normal configuration mode. Up to 8 areas are

supported.

(2)Select for . Scheduled-Switch Switch Day and Night Settings

Figure 6-50 Day/Night Scheduled-Switch

(3)Select the start time and the end time for the switch timing.

(4)Select the area by clicking the area No.

(5)Slide the cursor to adjust the sensitivity and proportion of object on the area

for the selected area in the daytime.

(6)Slide the cursor to adjust the sensitivity and proportion of object on the area

for the selected area at night.

(7)Set the arming schedule and linkage method as in the normal configuration

mode.

(8)Click to save the settings. Save

6.6.2 Configuring Video Tampering Alarm

Purpose:

You can configure the camera to trigger the alarm when the lens is covered and take

some certain alarm response actions.

Steps:

1. Enter the video tampering Settings interface:

Configuration > Advanced Configuration > Basic Event > Video Tampering

User Manual of Network Camera

Figure 6-51 Video Tampering Alarm

2. Check Enable Video Tampering checkbox to enable the video tampering

detection.

3. Set the video tampering area. Refer to Task 1 Set the Motion Detection Area in

Section 6.6.1.

4. Click to edit the arming schedule for video tampering. The arming schedule Edit

configuration is the same as the setting of the arming schedule for motion

detection. Refer to Task 2 Set the Arming Schedule for Motion Detection in

Section 6.6.1.

5. Check the checkbox to select the linkage method taken for the video tampering .

Audible warning, notify surveillance center, send email and trigger alarm output

are selectable. Please refer to Task 3 Set the Alarm Actions for Motion Detection

in Section 6.6.1.

6. Click to save the settings. Save

6.6.3 Configuring Alarm Input

Steps:

1. Enter the Alarm Input Settings interface:

Configuration > Advanced Configuration> Basic Event > Alarm Input:

User Manual of Network Camera

2. Choose the alarm input No. and the Alarm Type. The alarm type can be NO

(Normally Open) and NC (Normally Closed). Edit the name to set a name for the

alarm input (optional).

Figure 6-52 Alarm Input Settings

3. Click to set the arming schedule for the alarm input. Refer to Edit Task 2 Set the

Arming Schedule for Motion Detection in Section 6.6.1.

4. Check the checkbox to select the linkage method taken for the alarm input. Refer

to Task 3 Set the Alarm Actions for Motion Detection in Section 6.6.1.

5. You can also choose the PTZ linking for the alarm input if your camera is

installed with a pan/tilt unit. Check the relative checkbox and select the No. to

enable Preset Calling, Patrol Calling or Pattern Calling.

6. You can copy your settings to other alarm inputs.

7. Click to save the settings. Save

6.6.4 Configuring Alarm Output

Steps:

1. Enter the Alarm Output Settings interface:

Configuration>Advanced Configuration> Basic Event > Alarm Output

User Manual of Network Camera

2. Select one alarm output channel in the drop-down list. You can Alarm Output

also set a name for the alarm output (optional).

3. The Delay time can be set to 5sec, 10sec, 30sec, 1min, 2min, 5min, 10min or

Manual The delay time refers to the time duration that the alarm output remains .

in effect after alarm occurs.

4. Click to enter the Edit Schedule Time interface. The time schedule Edit

configuration is the same as the settings of the arming schedule for motion

detection Refer to Task 2 Set the Arming Schedule for Motion Detection in

Section 6.6.1.

5. You can copy the settings to other alarm outputs.

6. Click to save the settings. Save

Figure 6-53 Alarm Output Settings

6.6.5 Handling Exception

The exception type can be HDD full, HDD error, network disconnected, IP address

conflicted and illegal login to the cameras.

Steps:

User Manual of Network Camera

1. Enter the Exception ttings interface: Se

Configuration > Advanced Configuration> Basic Event > Exception

2. Check the checkbox to set the actions taken for the Exception alarm. Refer to

Task 3 Set the Alarm Actions Taken for Motion Detection in Section 6.6.1.

Figure 6-54 Exception Settings

3. Click to save the settings. Save

6.6.6 Configuring Other Alarm

Note: Some certain cameras support Wireless Alarm, PIR (passive infrared sensor)

Alarm or Emergency Alarm.

 Wireless Alarm

Purpose:

When wireless alarm signal is sent to the camera from the detector, such as the

wireless door contact, the wireless alarm is triggered and a series of response actions

can be taken.

Steps:

1. Enter the Wireless Alarm Settings interface:

Configuration > Advanced Configuration> Basic Event> Other Alarm

2. Select the wireless alarm number.

Up to 8 channels of external wireless alarm input are supported.

3. Check the checkbox of Enable Wireless Alarm to activate the wireless alarm.

4. Input the alarm name in the text field as desired.

5. Check the checkbox to select the linkage methods taken for the wireless alarm.

User Manual of Network Camera

6. Click to save the settings. Save

7. Locate the external wireless device beside the camera, and go to Configuration >

Advanced Configuration> System> Remote Control to arm the camera and

study the wireless alarm.

Figure 6-55 Configuring Wireless Alarm Settings

 PIR Alarm

Purpose:

A PIR (Passive Infrared) alarm is triggered when an intruder moves within the

detector's field of view. The heat energy dissipated by a person, or any other warm

blooded creature such as dogs, cats, etc., can be detected.

Steps:

1. Enter the PIR Alarm Settings interface:

Configuration > Advanced Configuration> Basic Event> Other Alarm

2. Check the checkbox of to activate the PIR alarm function. Enable PIR Alarm

3. Input the alarm name in the text field as desired.

4. Check the checkbox to select the linkage methods taken for the PIR alarm.

5. Click the button to set the arming schedule. Edit

6. Click to save the settings. Save

7. Go to to Configuration > Advanced Configuration> System> Remote Control

arm the camera.

User Manual of Network Camera

Figure 6-56 Configuring PIR Alarm Settings

 Emergency Alarm

Purpose:

You can press the Emergency button on the remote control to trigger the Emergency

Alarm in case of an emergency.

Note: The remote control is required for the Emergency Alarm. Go to

Configuration > Advanced Configuration> System> Remote Control to study the

remote control first.

Steps:

1. Enter the Emergency Alarm Settings interface:

Configuration > Advanced Configuration> Basic Event> Other Alarm

2. Check the checkbox to select the linkage methods taken for the Emergency alarm.

3. Click to save the settings. Save

User Manual of Network Camera

Figure 6-57 Configuring Emergency Alarm Settings

6.6.7 Configuring Audio Exception Detection

Purpose:

Audio exception detection function detects the abnormal sounds in the surveillance

scene, such as the sudden increase / decrease of the sound intensity, and some certain

actions can be taken when the alarm is triggered.

Note: Audio exception detection function varies according to different camera

models.

Steps:

1. Enter the Audio Exception Detection settings interface:

Configuration > Advan d Configuration> Smart Event> Audio Exception ce

Detection

2. Check the checkbox of to enable the audio loss detection Audio Loss Exception

function.

3. Check the checkbox of Sudden Increase of Sound Intensity Detection to detect

the sound steep rise in the surveillance scene. You can set the detection

sensitivity and threshold for sound steep rise.

4. Check the checkbox of to detect Sudden Decrease of Sound Intensity Detection

the sound steep drop in the surveillance scene. You can set the detection

sensitivity and threshold for sound steep drop.

Notes:

 Sensitivity: Range [1-100], the smaller the value is, the more severe the

change should be to trigger the detection.

User Manual of Network Camera

 Sound Intensity Threshold: Range [1-100], it can filter the sound in the

environment, the louder the environment sound, the higher the value should

be. You can adjust it according to the real environment.

5. You can view the real-time volume of the sound.

6. Click the button to set the arming schedule. Edit

7. Select the linkage methods for audio exception, including Notify Surveillance

Center, Send Email, Upload to FTP, Trigger Channel for recording and Trigger

Alarm Output.

8. Click to save the settings. Save

Figure 6-58 Configuring Audio Exception Detection

6.6.8 Configuring Defocus Detection

Purpose:

The image blur caused by defocus of the lens can be detected, and some certain

actions can be taken when the alarm is triggered.

Note: Defocus detection function varies according to different camera models.

Steps:

1. Enter the Defocus Detection settings interface:

Configuration> Advanced Configuration> Smart Event> Defocus Detection

2. Check the checkbox of to enable the function. Enable Defocus Detection

3. Click-and-drag the slider to set the detection sensitivity. The sensitivity value

ranges from 1 to 100, and the higher the value is, the more easily the defocus

image can trigger the alarm.

User Manual of Network Camera

4. Select the linkage methods for defocus, including Notify Surveillance Center,

Send Email and Trigger Alarm Output.

5. Click to save the settings. Save

Figure 6-59 Configuring Defocus Detection

6.6.9 Configuring Scene Change Detection

Purpose:

Scene change detection function detects the change of surveillance environment

affected by the external factors; such as the intentional rotation of the camera, and

some certain actions can be taken when the alarm is triggered.

Note: Scene change detection function varies according to different camera models.

Steps:

1. Enter the Scene Change Detection settings interface:

Configuration> Advanced Configuration> Smart Event> Scene Change

Detection

2. Check the checkbox of to enable the function. Enable Scene Change Detection

3. Click-and-drag the slider to set the detection sensitivity. The sensitivity value

ranges from 1 to 100, and the higher the value is, the more easily the change of

scene can trigger the alarm.

4. Click the button to set the arming schedule. Edit

5. Select the linkage methods for scene change, including Notify Surveillance

Center, Send Email, Upload to FTP, Trigger Channel and Trigger Alarm Output.

6. Click to save the settings. Save

User Manual of Network Camera

Figure 6-60 Configuring Scene Change Detection

6.6.10 Configuring Face Detection

Purpose:

Face detection function detects the face appears in the surveillance scene, and some

certain actions can be taken when the alarm is triggered.

Note: Face detection function varies according to different camera models.

Steps:

1. Enter the Face Detection settings interface:

Configuration> Advanced Configuration> Smart Event> Face Detection

2. Check the checkbox of to enable the function. Enable Face Detection

3. (Optional) Check the checkbox of Enable Dynamic Analysis for Face

Detection, and then the detected face is marked with green rectangle on the live

video.

Note: To mark the detected face on the live video, go to Local Configuration>

Live View Parameters and enable the Rules.

4. Click-and-drag the slider to set the detection sensitivity.

Sensitivity: Range [1-5]. The higher the value is, the more easily the face can be

detected.

User Manual of Network Camera

5. Click the button to set the arming schedule. Edit

6. Select the linkage methods for face detection, including Notify Surveillance

Center, Send Email, Upload to FTP, Trigger Channel and Trigger Alarm Output.

7. Click to save the settings. Save

Figure 6-61 Configuring Face Detection

6.6.11 Configuring Line Crossing Detection

Purpose:

Line crossing detection function detects people, vehicle or other objects which cross a

pre-defined virtual line, and some certain actions can be taken when the alarm is

triggered.

Note: Line crossing detection function varies according to different camera models.

Steps:

User Manual of Network Camera

100

1. Enter the Line Crossing Detection settings interface:

Configuration> Advanced Configuration> Sma Event> Line Crossing rt

Detection

2. Check the checkbox of to enable the function. Enable Line Crossing Detection

3. Select the line from the drop-down list for detection settings.

4. Click the button, and a virtual line is displayed on the live video. Draw Area

5. ick-and-drag the line, and you can locate it on the live video as desired. Click Cl

on the line, two red squares are displayed on each end, and you can

click-and-drag one of the red squares to define the shape and length of the line.

6. Select the direction for line crossing detection. And you can select the directions

as A<->B, A ->B, and B->A.

A<->B: Only the arrow on the B side shows; when an object going across the plane

with both direction can be detected and alarms are triggered.

A->B: Only the object crossing the configured line from the A side to the B side

can be detected.

B->A: Only the object crossing the configured line from the B side to the A side

can be detected.

7. Click-and-drag the slider to set the detection sensitivity.

Sensitivity: Range [1-100]. The higher the value is, the more easily the line

crossing action can be detected.

8. Repeat the above steps to configure other lines. Up to 4 lines can be set. You can

click the button to clear all pre-defined lines. Clear

9. Click the button to set the arming schedule. Edit

10. Select the linkage methods for line crossing detection, including Notify

Surveillance Center, Send Email, Upload to FTP, Trigger Channel and Trigger

Alarm Output.

11. Click to save the settings. Save

User Manual of Network Camera

101

Figure 6-62 Draw Crossing Line

6.6.12 Configuring Intrusion Detection

Purpose:

Intrusion detection function detects people, vehicle or other objects which enter and

loiter in a pre-defined virtual region, and some certain actions can be taken when the

alarm is triggered.

Note: Intrusion detection function varies according to different camera models.

Steps:

1. Enter the Intrusion Detection settings interface:

Configuration> Advanced Configuration> Smart Event> Intrusion Detection

2. Check the checkbox of to enable the function. Enable Intrusion Detection

3. Select the region from the drop-down list for detection settings.

4. Click the button to start the region drawing. Draw Area

5. Click on the live video to specify the four vertexes of the detection region, and

right click to complete drawing.

User Manual of Network Camera

102

6. Set the time threshold, detection sensitivity and object percentage for intrusion

detection.

Threshold: Range [0s-10s], the threshold for the time of the object loitering in

the region. If you set the value as 0, alarm is triggered immediately after the

object entering the region.

Sensitivity: Range [1-100]. The value of the sensitivity defines the size of the

object which can trigger the alarm. When the sensitivity is high, a very small

object can trigger the alarm.

Percentage: Range [1-100]. Percentage defines the ratio of the in-region part of

the object which can trigger the alarm. For example, if the percentage is set as

50%, when the object enters the region and occupies half of the whole region, the

alarm is triggered.

7. Repeat the above steps to configure other regions. Up to 4 regions can be set. You

can click the button to clear all pre-defined regions. Clear

8. Click the button to set the arming schedule. Edit

9. Select the linkage methods for intrusion detection, including Notify Surveillance

Center, Send Email, Upload to FTP, Trigger Channel and Trigger Alarm Output.

10. Click to save the settings. Save

Figure 6-63 Configuring Intrusion Area

User Manual of Network Camera

103

6.6.13 Configuring Region Entrance Detection

Purpose:

Region entrance detection function detects people, vehicle or other objects which

enter a pre-defined virtual region from the outside place, and some certain actions can

be taken when the alarm is triggered.

Note: Region entrance detection function varies according to different camera models.

Steps:

1. Enter the Region Entrance Detection settings interface:

Configuration> Advanced Configuration> Smart Event> Region Entrance

Detection

2. Check the checkbox of Enable Region Entrance Detection to enable the

function.

3. Select the region from the drop-down list for detection settings.

4. Click the button to start the region drawing. Draw Area

5. Click on the live video to specify the four vertexes of the detection region, and

right click to complete drawing.

6. Click-and-drag the slider to set the detection sensitivity.

Sensitivity: Range [1-100]. The value of the sensitivity defines the size of the

object which can trigger the alarm. When the sensitivity is high, a very small

object entering the region can trigger the alarm.

7. Repeat the above steps to configure other regions. Up to 4 regions can be set. You

can click the Clear button to clear all pre-defined regions.

8. Click the button to set the arming schedule. Edit

9. Select the linkage methods for region entrance detection, including Notify

Surveillance Center, Send Email, Upload to FTP, Trigger Channel and Trigger

Alarm Output.

10. Click to save the settings. Save

User Manual of Network Camera

104

Figure 6-64 Configuring Region Entrance Detection

6.6.14 Configuring Region Exiting Detection

Purpose:

Region exiting detection function detects people, vehicle or other objects which exit

from a pre-defined virtual region, and some certain actions can be taken when the

alarm is triggered.

Note: Region exiting detection function varies according to different camera models.

Steps:

1. Enter the Region Exiting Detection settings interface:

Configuration> Advanced Configuration> Smart Event> Region Exiting

Detection

2. Check the checkbox of to enable the function. Enable Region Exiting Detection

3. Select the region from the drop-down list for detection settings.

4. Click the button to start the region drawing. Draw Area

5. Click on the live video to specify the four vertexes of the detection region, and

right click to complete drawing.

6. Click-and-drag the slider to set the detection sensitivity.

Sensitivity: Range [1-100]. The value of the sensitivity defines the size of the

User Manual of Network Camera

105

object which can trigger the alarm. When the sensitivity is high, a very small

object exiting from the region can trigger the alarm.

7. Repeat the above steps to configure other regions. Up to 4 regions can be set. You

can click the button to clear all pre-defined regions. Clear

8. Click the button to set the arming schedule. Edit

9. Select the linkage methods for region exiting detection, including Notify

Surveillance Center, Send Email, Upload to FTP, Trigger Channel and Trigger

Alarm Output.

10. Click to save the settings. Save

Figure 6-65 Configuring Region Exiting Detection

6.6.15 Configuring Unattended Baggage Detection

Purpose:

Unattended baggage detection function detects the objects left over in the pre-defined

region such as the baggage, purse, dangerous materials, etc., and a series of actions

can be taken when the alarm is triggered.

Note: Unattended baggage detection function varies according to different camera

models.

Steps:

User Manual of Network Camera

106

1. Enter the Unattended Baggage Detection settings interface:

Configuration> Advanced Configuration> Smart Event> Unattended

Baggage Detection

2. Check the checkbox of to enable the Enable Unattended Baggage Detection

function.

3. Select the region from the drop-down list for detection settings.

4. Click the button to start the region drawing. Draw Area

5. Click on the live video to specify the four vertexes of the detection region, and

right click to complete drawing.

6. Set the time threshold and detection sensitivity for unattended baggage detection.

Threshold: Range [5s- s], the threshold for the time of the objects left over in 20

the region. If you set the value as 10, alarm is triggered after the object is left and

stay in the region for 10s.

Sensitivity: Range [1-100]. The value of sensitivity defines the similarity degree

of the background image. Usually, when the sensitivity is high, a very small

object left in the region can trigger the alarm.

7. Repeat the above steps to configure other regions. Up to 4 regions can be set. You

can click the button to clear all pre-defined regions. Clear

8. Click the button to set the arming schedule. Edit

9. Select the linkage methods for unattended baggage detection, including Notify

Surveillance Center, Send Email, Upload to FTP, Trigger Channel and Trigger

Alarm Output.

10. Click to save the settings. Save

User Manual of Network Camera

107

Figure 6-66 Configuring Unattended Baggage

6.6.16 Configuring Object Removal Detection

Purpose:

Object removal detection function detects the objects removed from the pre-defined

region, such as the exhibits on display, and a series of actions can be taken when the

alarm is triggered.

Note: Object removal detection function varies according to different camera models.

Steps:

1. Enter the Object Removal Detection settings interface:

Configuration> Advanced Configuration> Smart Event> Object Removal

Detection

2. Check the checkbox of to enable the Enable Object Removal Detection

function.

3. Select the region from the drop-down list for detection settings.

4. Click the button to start the region drawing. Draw Area

5. Click on the live video to specify the four vertexes of the detection region, and

right click to complete drawing.

User Manual of Network Camera

108

6. Set the time threshold and detection sensitivity for object removal detection.

Threshold: Range [5s-20 , the threshold for the time of the objects removed s]

from the region. If you set the value as 10, alarm is triggered after the object

disappears from the region for 10s.

Sensitivity: Range [1-100]. The value of sensitivity defines the similarity degree

of the background image. Usually, when the sensitivity is high, a very small

object taken from the region can trigger the alarm.

7. Repeat the above steps to configure other regions. Up to 4 regions can be set. You

can click the button to clear all pre-defined regions. Clear

8. Click the button to set the arming schedule. Edit

9. Select the linkage methods for object removal detection, including Notify

Surveillance Center, Send Email, Upload to FTP, Trigger Channel and Trigger

Alarm Output.

10. Click to save the settings. Save

Figure 6-67 Configuring Object Removal Detection

User Manual of Network Camera

109

6.7 VCA Configuration

6.7.1 Behavior Analysis

The behavior analysis detects a series of suspicious behavior, and certain linkage

methods will be enabled if the alarm is triggered.

Figure 6-68 Behavior Analysis

 VCA Info

Behavior Analysis Version: It lists the version of the algorithms library.

Display information includes the display on picture and display on stream.

Display Target info. on Alarm Picture: There will be a fram on the target on e

the uploaded alarm picture if the checkbox is checked.

Display Rule info. on Alarm Picture: The captured target and the configured

area will be framed on the alarm picture.

Display VCA info. on Stream: The green frames will be displayed on the target

if in a live view or playback.

Note: Make sure the rules are enabled in your local settings. Go to

Configuration Local Configuration Rules > > to enable it.

Snapshot Setting: You can set the quality and resolution for the captured picture.

Upload JPEG Image to Center: Check the checkbox to upload the captured

User Manual of Network Camera

111

Figure 6-69 Draw on Live View Window

 Shield Region

The shield region allows you to set the specific region in which the behavior analysis

will not function. Up to 4 shield regions are supported.

Steps:

1. Click tab to enter the shield region configuration interface. Shield Region

2. Click Draw Area. Draw area by left click end-points in the live view window,

and right click to finish the area drawing.

Notes:

 Polygon area with up to 10 sides is supported.

 Click to delete the drawn areas.Delete

 If live view is stopped, there is no way to draw the shield regions.

User Manual of Network Camera

112

3. Click to save the settings. Save

 Rule

The behavior analysis supports a series of behaviors, including line crossing

detection, intrusion, region entrance, and region exiting, etc.

Note: Please refer to each chapter for detailed information of each behavior.

Figure 6-70 Configure the Rule

User Manual of Network Camera

113

Steps:

1. Click Tab to enter the rule configuration interface. Rule

2. Check the checkbox of the single rule to enable the rule for behavior analysis.

3. Select the rule type, set the filter type, and then draw the line / area on the live

video for the single rule.

Filter type: Pixels and Actual Size are selectable. If Pixels is selected, draw

the area of maximum size and minimum size on the live video for each rule.

If Actual Size is selected, input the length and width of the maximum size and

minimum size. Only the target whose size is between the minimum value and

maximum value will trigger the alarm.

Note: Make sure the camera calibration is configured if actual size is selected.

Detection Target: Select Human or Vehicle as the detection target. You can

also select All to detect all the objects as the target.

Draw line / area: For line crossing detection, you have to draw a line, and

select the crossing direction, which is bidirectional, A- -B, or B- -A. For to to

other events such as intrusion, region entrance, region exiting, etc., you have

to left click on the live video to set the end points of the area and right click to

finish the area drawing.

Note: If the live view is stopped, the detection area / line cannot be draw and

the rules cannot be set.

4. Check the checkbox of the combined rule to enable the rule for behavior

analysis.

5. Select two configured single rules as the Rule A and Rule B of the combined

rule, set the minimum and maximum time interval for the two single rules,

and then select the trigger order of the single rules for alarm filtering.

Notes:

 If you select the rule type as None, the rule option is invalid, and no

behavior analysis can be configured.

 The trigger order of the single rules for alarm filtering can be set as In

Ascending Order or In Ascending/Descending Order.

 Up to 8 single rules and 2 combined rules are configurable. And the line

crossing, intrusion, region exiting and region entrance are supported for

the combined rules.

User Manual of Network Camera

114

6. Click to save the settings. Save

7. Click tab, click to set the schedule time for each rule, Arming Schedule Edit

and click to save the settings. Save

8. Click tab, check the checkbox of corresponding linkage Alarm Linkage

method for each rule, and click to save the settings. Save

 Advanced Configuration

● Parameter

Configure the following parameters to detail the configuration.

Figure 6-71 Advanced Configuration

Detection Sensitivity [0~4]: Refers to the sensitivity of the camera detects a target.

The higher the value, the easier a target be recognized, and the higher the

misinformation is. The default value of 3 is recommended.

Background Update Rate [0~4]: It refers to the speed of the new scene replaces the

previous scene. The default value of 3 is recommended.

Single Alarm : If single alarm is selected, the target in the configured area will trigger

the alarm for only once. If it is not checked, the same target will cause the continuous

alarm in the same configured area.

Leave Interference Suppression: Check this checkbox to stop the interference

caused by the leaves in the configured area.

Output Type: Select the position of the frame. Target center, bottom center, and top

centers are selectable. E.g.: The target will be in the center of the frame if target center

is selected.

User Manual of Network Camera

115

Restore Default: Click to restore the configured parameters to the default.

Restart VCA: Restart the algorithms library of behavior analysis.

● Global Size Filter

Note: Compared with the size filter under rule, which is aiming at each

rule, the global size filter is aim at all rules.

Steps:

1. Check the checkbox of to enable the function. Global Size Filter

2. Select the Filter Type as Actual Size or Pixel.

Actual Size: Input the length and width of both the maximum size and the

minimum size. Only the target whose size is between the minimum value and

maximum value will trigger the alarm.

Notes:

● Camera calibration has to be configured if you select the filter by actual

size.

● The length of the maximum size should be longer than the length of the

minimum size, and so does the width.

Pixel: Click Minimum Size to draw the rectangle of the min. size on the live view.

And click Maximum Size to draw the rectangle of the max. size on the live view.

The target is smaller than the min. size or larger than the max. size will be

filtered.

Notes:

● The drawn area will be convert to the pixel by the background ed

algorithm.

● The global size filter cannot be configured if the live view is stopped.

● The length of the maximum size should be longer than the length of the

minimum size, and so does the width.

3. Click to save the settings. Save

User Manual of Network Camera

116

6.7.2 Face Capture

Face capture can capture the face appears in the configured area, and the face

characters information, including the age, gender, and wearing glasses or not will be

uploaded with the captured picture as well.

Figure 6-72 Face Capture

 VCA Info

Face Capture Version: It lists the version of the algorithms library.

Display information includes the display on picture and display on stream.

Display Target info. on Alarm Picture: There will be a frame on the target on

the uploaded alarm picture if the checkbox is checked.

Display VCA info. on Stream: The green frames will be displayed on the target

if in a live view or playback.

Snapshot Setting: Select the picture quality for the captured picture. Good, better, and

best are selectable.

 Shield Region

The shield region allows you to set the specific region in which the face capture will

not function. Up to 4 shield regions are supported.

Steps:

1. Click tab to enter the shield region configuration interface. Shield Region

2. Click Draw Area. Draw area by left click four end-points in the live view

window, and right click to finish the area drawing.

User Manual of Network Camera

117

Notes:

● Click to delete the drawn areas.Delete

● If the live view is stopped, there is no way to draw the shield

regions.

3. Click to save the settings. Save

 Rule

Steps:

1. Check the checkbox of to enable rules of face capture. Rule

2. Click to draw the minimum pupil distance. The Minimize Pupil Distance

distance of the drawn pupil will be displayed on the box below the live view.

The minimize pupil distance refers to the minimum square size composed by

the area between two pupils, and it is the basic standard for a camera to

identify a target.

3. Click Draw Area to draw the area you want the face capture to take effect.

Draw area by left click end-points in the live view window, and right click to

finish the area drawing.

Note s:

 Polygon area (4~10 sides) sides is supported.

 If the live view is stopped, there is no way to draw the configured area.

4. Click to save the settings. Save

 Advanced Configuration

Configure the following parameters according to your actual environment.

Detection Parameters:

Generation Speed [1~5]: The speed to identify a target. The higher the value, the

fast the target will be recognized. Setting the value quite low, and if there was a face er

in the configured area from the start, this face will not be captured. It can reduce the

misinformation of the faces in the wall painting or posters. The default value of 3 is

recommended.

Capture Times [1~10]: Refers to the capture times a face will be captured during its

stay in the configured area. The default value is 1.

Sensitivity [1~5]: The sensitivity to identify a target. The higher the value, the easier

a face will be recognized, and the higher misinformation is. The default value of 3 is

User Manual of Network Camera

118

recommended.

Capture Interval [1~255 Frame]: The frame interval to capture a picture. If you set

the value as 1, which is the default value, it means the camera captures the face in

every frame.

Capture Sensitivity [0~20]: The threshold the camera treats the target as a face. Only

when the face score generated by the algorithm is equal or higher than the value, the

camera will treat the target as a face. The default value of 2 is recommended.

Face Capture Advanced Parameters:

Face Exposure: Check the checkbox to enable the face exposure.

Reference Brightness [0~100]: The reference brightness of a face in the face

exposure mode. If a face is detected, the camera adjusts the face brightness according

to the value you set. The higher the value, the brighter the face is.

Minimum Duration [1~60min]: The minimum duration of the camera exposures the

face. The default value is 1 minute.

Note: If the face exposure is enabled, please make sure the WDR function is disabled,

and the manual iris is selected.

Enable Face ROI: If the camera captures a face, the face area will be treated as the

region of interest, and the image quality of this area will be improved.

Restore Default Restore : Click to restore all the settings in advanced configuration

to the factory default.

User Manual of Network Camera

119

Figure 6-73 Advanced Configuration

6.7.3 Heat Map

Heat map is a graphical representation of data represented by colors. The heat map

function of the camera usually be used to analyze the visit times and dwell time of

customers in a configured area.

 Heat Map Configuration

Steps:

1. Enter the Heat Map configuration interface: Configuration > Advanced

Configuration > Heat Map

User Manual of Network Camera

120

Figure 6-74 Heat Map Configuration

2. Select tab to set the detailed parameters. Heat Map Configuration

3. Check the checkbox of to enable the function. Enable Heat Map

4. Click Draw Area to define the area for heat value statistics. Draw area by left

click four end-points in the live view window, and right click to finish the area

drawing. Up to 8 areas are configurable.

Note: You can click Select All to select the whole live view window as the

configured area. Or click to delete the current drawn area.Delete

5. Configure the parameters for drawn area.

Detection Sensitivity [0~100]: It refers to the sensitivity of the camera

identify a target. The over-high sensitivity may cause the misinformation. It is

recommended you set the sensitivity as the default value, which is 50.

Background Update Rate [0~100]: It refers to the speed of the new scene

replaces the previous scene. E.g.: In front of a cabinet, the people besides the

cabinet will be double counted if the goods moved from the cabinet, and the

camera treats the cabinet (on which the good removed) as a new scene. The

default value of 50 is recommended.

Scene Change Level [0~100]: It refers to level of the camera responses to the

dynamic environment, e.g., a swaying curtain. The camera may treat the

swaying curtain as a target. Setting the level properly will avoid the

User Manual of Network Camera

121

misinformation. The default level is 50.

Minimum Target Size [0~100] It refers to the size of the camera identify a :

target. You can set the target size according to the actual environment. The

default size is 50.

Target Track: Select ON or OFF to enable or disable the tracking of the

target.

6. Click to set the arming schedule. Edit

7. Select the linkage method by checking the checkbox of notify the surveillance

center.

8. Click to save the settings. Save

 Heat Map Statistics

Steps:

1. Click Heat Map Statistics to enter the data statistics interface.

2. Select the report type by clicking the drop-down menu. Daily report, weekly

report, monthly report, and annual report are selectable.

3. Click to export the data. Counting

4. Select Statistics Result as Space Heat Map or Time Heat Map, and the

corresponding heat map will be displayed.

If you select the time heat map to list the statistics, there is an button Export

to export the data in an excel file.

User Manual of Network Camera

122

Figure 6-75 Space Heat Map

Notes:

 As shown in the figure above, red color block (255, 0, 0) indicates the most

welcome area, and blue color block (0, 0, 255) indicates the less-popular area.

 It is recommended that you do not adjust the electronic lens after the

installation is completed, which may cause the inaccuracy of the data in some

degree.

6.7.4 People Counting

People Counting function helps to calculate the number of people entered or exited a

certain configured area and is widely applied to the entrances or exits.

Notes:

 People counting function is supported by some certain iDS camera models.

 It is recommended to install the camera vertically to the ground, and thus the

counting function can be more accurate.

 People Counting Configuration

User Manual of Network Camera

123

Steps:

1. Enter the People Counting Configuration interface:

Configuration > Advanced Configuration > People Counting

2. Select tab to set the detailed parameters. People Counting Configuration

Figure 6-76 People Counting Configuration

3. Check the checkbox of to enable the function. Enable People Counting

4. (Optional) Check the checkbox of , and the real-time Enable OSD Overlay

number of people entered and exited is displayed on the live video.

5. t the detection line. Se

An orange line, called detection line can be set on the live video, and the

people entering or exiting through the line will be detected and counted.

1) Click , and an orange detection line will appear on the image. Draw Line

2) Click-and-drag the detection line to adjust its position.

3) Click-and-drag the two end points of the detection line to adjust its length.

4) To delete the detection line, click the button. Delete Line

Note: The detection line should cover the whole entrance / exit.

6. An arrow indicating the entering direction of people is shown after the

User Manual of Network Camera

124

detection line is selected. You can click the button to adjust Change Direction

the arrow direction to opposite side.

7. Check the checkbox of to enable the function. Camera Calibration

8. Click the button, and the number of the people entered and Reset Counter

exited will be cleared to zero.

9. Click to set the arming schedule. Edit

10. Check the checkbox of to set the linkage action. Notify Surveillance Center

11. Click to save the settings. Save

 People Counting Statistics

Steps:

1. Click People Counting Statistics to enter the data statistics interface.

2. Select the report type by clicking the drop-down menu. Daily report, weekly

report, monthly report, and annual report are selectable.

3. Select the Statistics Type as People Entered or People Exited.

4. Select the Statistics Time.

Note: Daily report calculates the data on the date you selected, weekly report

calculates for week your selected date belongs to, monthly report calculates

for the month your selected date belongs to, and the annual report calculates

for the year your selected date belongs to.

5. Click to calculate the data. Counting

6. Select to export the Statistics Result as Table, Bar Chart, or Line Chart.

Note: If you select table to list the statistics, there is an button to Export

export the data in an excel file.

User Manual of Network Camera

125

Figure 6-77 Statistics Result

Note: It is recommended that you do not adjust the electronic lens after the

installation is completed, which may cause the inaccuracy of the data in some degree.

User Manual of Network Camera

127

Note: Please refer to the for creating the ﬁle path. User Manual of NAS

 For your privacy and to better protect your system against security risks,

we strongly recommend the use of strong passwords for all functions and

network devices. The password should be something of your own

choosing (using a minimum of 8 characters, including upper case letters,

lower case letters, numbers and special characters) in order to increase

the security of your product.

 Proper conﬁguration of all passwords and other security settings is the

responsibility of the installer and/or end-user.

(4) Click to add the network disk. Save

2. Initialize the added network disk.

(1) Enter the HDD Settings interface ( Advanced Configuration > Storage >

Storage Management), in which you can view the capacity, free space, status,

type and property of the disk.

Figure 7-2 Storage Management Interface

(2) If the status of the disk is , check the corresponding checkbox to Uninitialized

select the disk and click to start initializing the disk. Format

When the initialization completed, the status of disk will become Normal.

Specyfikacje produktu

Marka:	Hikvision
Kategoria:	Kamera monitorująca
Model:	DS-2CD4525FWD-IZH

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Hikvision DS-2CD4525FWD-IZH, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Kamera monitorująca Hikvision

Hikvision DS-2CE59U1T-AVPIT3ZF Instrukcja

12 Stycznia 2025

Hikvision IDS-2CD7526G0-IZHSY Instrukcja

12 Stycznia 2025

Hikvision DS-2CD2163G0-I(S) Instrukcja

12 Stycznia 2025

Hikvision DS-2CD2H83G1-IZS Instrukcja

12 Stycznia 2025

Hikvision DS-2CE16H0T-IT1E Instrukcja

11 Stycznia 2025

Hikvision THC-T127-PTLTS Instrukcja

7 Stycznia 2025

Hikvision DS-2CE16U0T-LF Instrukcja

19 Grudnia 2024

Hikvision DS-2CE10KF3T-LSYE Instrukcja

19 Grudnia 2024

Hikvision DS-2CE10KF3T-LS Instrukcja

19 Grudnia 2024

Hikvision DS-2CE76U0T-LMF Instrukcja

19 Grudnia 2024

Instrukcje Kamera monitorująca

Najnowsze instrukcje dla Kamera monitorująca

Technaxx TX-192 Instrukcja

28 Stycznia 2025

Wisenet XNV-8080R Instrukcja

25 Stycznia 2025

Dahua Technology Pro IPC-HDPW5442G-Z Instrukcja

15 Stycznia 2025

Toshiba IKS-WR7412 Instrukcja

13 Stycznia 2025

AVerMedia FC1320-P Instrukcja

13 Stycznia 2025

Digitus OptiMax DN-16037 Instrukcja

13 Stycznia 2025

Speco Technologies O5LB1 Instrukcja

12 Stycznia 2025

ZKTeco AntarVis 2.0 Instrukcja

12 Stycznia 2025

Speco Technologies O2P30X Instrukcja

12 Stycznia 2025

Kguard QRT-501 Instrukcja

11 Stycznia 2025