Instrukcja obsługi Hikvision DS-2CD2D21G0/M-D/NF

Hikvision Kamera monitorująca DS-2CD2D21G0/M-D/NF

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Hikvision DS-2CD2D21G0/M-D/NF (160 stron) w kategorii Kamera monitorująca. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/160
DS-2CD2D21G0/M-D/NF
Pinhole and Covert
Mini Network Cameras
User Manual
DS-2CD2D21G0/M-D/NF User Manual
UM DS-2CD2D21G0/M-D/NF 020319NA 1
About this Manual
This Manual is applicable to the DS-2CD2D21G0/M-D/NF Pinhole and Covert Mini Network Cameras.
The Manual includes instructions for using and managing the product. Pictures, charts, images and all other information
hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without
notice, due to firmware updates or other reasons. Please find the latest version in the company Web site.
Please use this user manual under the guidance of professionals.
Legal Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED, WITH ITS HARDWARE,
SOFTWARE AND FIRMWARE, IS PROVIDED "AS IS", WITH ALL FAULTS AND ERRORS, AND OUR COMPANY MAKES
NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY
QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT
WILL OUR COMPANY, ITS DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY
SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES
FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN
CONNECTION WITH THE USE OF THIS PRODUCT, EVEN IF OUR COMPANY HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY AT YOUR
OWN RISKS. OUR COMPANY SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY
LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR
OTHER INTERNET SECURITY RISKS; HOWEVER, OUR COMPANY WILL PROVIDE TIMELY TECHNICAL SUPPORT IF
REQUIRED.
SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR JURISDICTION
BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS THE APPLICABLE LAW.
OUR COMPANY SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS USED WITH ILLEGITIMATE
PURPOSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS.
Safety Instruction
These instructions are intended to ensure that the user can use the product correctly to avoid danger or property loss.
The precaution measure is divided into “Warnings” and “Cautions”:
Notice:
If camera fails to synchronize local time with that of the network, you need to set up camera time manually. Visit the
camera and enter system setting interface for time setting.
DS-2CD2D21G0/M-D/NF User Manual
UM DS-2CD2D21G0/M-D/NF 020319NA 2
Warnings: Serious injury or death may be caused if any of these warnings are neglected.
Cautions: Injury or equipment damage may be caused if any of these cautions are neglected.
WARNINGS! Follow these safeguards to
prevent serious injury or death.
CAUTIONS! Follow these precautions to
prevent potential injury or material damage.
WARNINGS
Please use a power adapter that can meet the safety extra low voltage (SELV) standard. Source with 12 VDC or 24
VAC (depending on model) according to the IEC60950-1 and Limited Power Source standard.
To reduce the risk of fire or electrical shock, do not expose this product to rain or moisture.
This installation should be made by a qualified service person and should conform to all local codes.
Please install blackout equipment into the power supply circuit to address supply interruption.
Make sure that the ceiling can support more than 50 (N) Newton gravities if the camera is fixed to the ceiling.
If the product does not work properly, please contact your dealer or the nearest service center. Never attempt to
disassemble the camera yourself. (We shall not assume any responsibility for problems caused by unauthorized repair
or maintenance.)
CAUTIONS!
Make sure the power supply voltage is correct before using the camera.
Do not drop the camera or subject it to physical shock.
Do not touch sensor modules with fingers. If cleaning is necessary, use a clean cloth with a bit of ethanol and wipe it
gently. If the camera will not be used for an extended period of time, put on the lens cap to protect the sensor from dirt.
Do not aim the camera lens at a strong light such as the sun or an incandescent lamp. A strong light can cause fatal
damage to the camera.
The sensor may be burned out by a laser beam, so when any laser equipment is being used, make sure that the
surface of the sensor not be exposed to the laser beam.
Do not place the camera in extremely hot or cold temperatures (refer to product specification for working temperature),
dusty or damp environment, and do not expose it to high electromagnetic radiation.


Specyfikacje produktu

Marka: Hikvision
Kategoria: Kamera monitorująca
Model: DS-2CD2D21G0/M-D/NF

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Hikvision DS-2CD2D21G0/M-D/NF, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Kamera monitorująca Hikvision

Instrukcje Kamera monitorująca

Najnowsze instrukcje dla Kamera monitorująca

Trebs

Trebs CCD-401C Instrukcja

15 Października 2024
D-Link

D-Link DCS-7510 Instrukcja

15 Października 2024
Alecto

Alecto DVC-215IP Instrukcja

13 Października 2024
Friedland

Friedland E895 Instrukcja

10 Października 2024
Elro

Elro SC80 Instrukcja

10 Października 2024
TP-Link

TP-Link InSight S345 Instrukcja

9 Października 2024
TP-Link

TP-Link InSight S485 Instrukcja

9 Października 2024
D-Link

D-Link DCS-70 Instrukcja

9 Października 2024
Xiaomi

Xiaomi C200 Instrukcja

9 Października 2024