Instrukcja obsługi Hifonics Brutus BXS10D4
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Hifonics Brutus BXS10D4 (3 stron) w kategorii subwoofer. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/3
Sealed enclosures offer a range of performance
proles depending on the internal air volume.
Larger enclosures will have a smoother more
extended response while a small enclosure
will have increased output in a more focused
frequency range. Sealed enclosures are the
simplest to construct but do require that the box
be completely air tight.
• Use 3/4” MDF
• Make sure the woofer mounting panel is
full width and height
• Glue all mating surfaces
• Use wood screws
• Use silicone caulk on all internal joints
The internal volume of the
enclosure must be determined
to insure proper performance.
Simply measure height, width and
depth of enclosure you intend
to build. Subtract the material
thickness. Multiply these numbers
and divide by 1728 to get the
volume in cubic feet.
For enclosures with an angled
panel, measure the larger and
smaller depths, add these
together and divide by two. Use
this averaged depth.
Enclosure
Volume
D
H x W x D
1728
D1 + D2
2
Sealed
Vented
Enclosure types
Volume calculation
Subwoofer dimensions
CAUTION
Always consider consulting a professional audio installer
before installing new subwoofers. High power audio
systems have the ability create sound levels above 130dB.
Extended exposure to high sound pressure levels can
cause hearing damage.
Always run any new wiring through safe areas that wont
interfere with the normal operation of the vehicle.
Congratulations on your choice of a Hifonics subwoofer.
This “Quick Start Installation” guide is meant to help you
“hook up” and play music. For more detailed information
on system setting, speaker and subwoofer conguration,
and full specications by model, visit the website at
Hifonics.com
It’s a good idea to conrm that you have purchased the
correct size subwoofers to t your vehicle. If you have any
reservations about being able to complete the installation
yourself, we recommend contacting a professional. Be careful
as you go. Always disconnect the negative battery terminal
before starting any electrical work on the vehicle.
BXS8D4 BXS10D4 BXS12D4
Height 12.5” 13” 14.5”
Width 12.5” 13” 14.5”
Depth 9.0” 10” 10.25”
Vb 0.5 ft
30.65 ft30.75 ft3
F3 46 Hz 42 Hz 40 Hz
Qtc .866 .959 1.10
BXS8D4 BXS10D4 BXS12D4
Height 12.5” 13.5” 14.5”
Width 17.5” 18.5” 19.5”
Depth 1 5.5” 6.0” 6.0”
Depth 2 7.5” 8.0” 8.0”
Vb 0.5 ft30.65 ft30.75 ft3
F3 46 Hz 42 Hz 40 Hz
Qtc .866 .959 1.10
Before you start
Rectangular
Angled
Recommended enclosures
Enclosure construction
in(mm) A B C D
BXS8D4 8.43”(214) 2.77”(70) 7.17”(182) 0.57”(14.4)
BXS10D4 10.31”(262) 2.93”(74) 9.06”(230) 0.67”(17)
BXS12D4 12.28”(312) 3.00”(76) 10.59”(269) 0.96”(24)
A
B
D
C
Vented designs are NOT recommended. This
subwoofer is designed to perform in small
sealed enclosures.
Quick Start
Installation Guide
WARRANTY
Maxxsonics USA Inc. warrants this product, to the original consumer purchaser, to be free from
defects in material and workmanship for a period of one (1) year from the date of purchase.
Maxxsonics USA Inc. will, at it’s discretion, repair or replace defective products during the warranty
period. Components that prove to be defective in materials and workmanship under proper installation
and use must be returned to the original authorized Maxxsonics USA Inc. retailer from where it was
purchased. A photocopy of the original receipt must accompany the product being returned. The
costs associated with removal, re-installation and freight are not the responsibility of Maxxsonics
USA Inc. This warranty is limited to defective parts and specically excludes any incidental or
consequential damages connected therewith. To view the full warranty, please visit the website.
Hifonics products are designed and engineered in the USA by
www.maxxsonics.com HF BXS shallow wfr QSG 01 - rev1
A Low pass lter will allow only
the bass frequencies to reach the
woofer making for a more natural
transition to the higher frequency
drivers. Check your amplier’s
manual for details.
We recommend using an
electronic subsonic lter. This will
help to protect the woofer from
extreme low frequency distortion.
Many ampliers are equipped
with this type lter. Check your
amplier’s manual for details.
This subwoofer is equipped with
quick disconnect type terminals.
Use crimp type terminals or solder
the wire directly to the terminals.
Depending on the number of woofers you intend to use,
you can congure the wiring to provide the best impedance
load for your system. Below are some examples. Consult
your amplier’s manual for recommendations.
Low Pass (LPF)
Subsonic
Congurations
Connections
Subwoofer specicationsCrossovers
Wiring
BXS8D4
BXS10D4
BXS12D4
4 4
82.7
4 4
4 4
4 4
4 4
4 4
4 4
4 4
2
4 4
2
10Hz 100Hz 1000Hz
10Hz 100Hz 1000Hz
BXS8D4 BXS10D4 BXS12D4
NomZ 2 x 4 2 x 4 2 x 4 Ohm
Sd .021 .034 .047 sqM
Revc 6.20 6.90 7.05 Ohm
BL 11.04 14.14 15.38 TxM
Vas 12.19 27.55 53.98 Liters
Cms 192.42 168.01 171.14 um/N
Mms 76.26 130.81 174.42 Grams
Fs 41.5 33.95 29.13 Hz
Qms 4.660 5.440 6.928
Qes 1.010 0.963 0.952
Qts 0.830 0.819 0.837
no 0.081 0.108 0.135 %
SPL@1W 82 83 86 dB
Xmax 8.2 8.7 9.0 mm
RMS 200 300 300 Watts
Peak 400 600 600 Watts
Specyfikacje produktu
Marka: | Hifonics |
Kategoria: | subwoofer |
Model: | Brutus BXS10D4 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Hifonics Brutus BXS10D4, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje subwoofer Hifonics
4 Września 2024
18 Sierpnia 2024
22 Maja 2024
Instrukcje subwoofer
- subwoofer Yamaha
- subwoofer Pioneer
- subwoofer Bosch
- subwoofer JBL
- subwoofer Onkyo
- subwoofer Roland
- subwoofer KEF
- subwoofer Klipsch
- subwoofer Behringer
- subwoofer Boss
- subwoofer Marquant
- subwoofer Jensen
- subwoofer Blaupunkt
- subwoofer Speed-Link
- subwoofer Metra
- subwoofer Martin Logan
- subwoofer Phoenix Gold
- subwoofer Audac
- subwoofer Kenwood
- subwoofer Polk
- subwoofer Alpine
- subwoofer Dynaudio
- subwoofer Paradigm
- subwoofer JVC
- subwoofer Memphis Audio
- subwoofer Jamo
- subwoofer Nubert
- subwoofer LD Systems
- subwoofer Krüger&Matz
- subwoofer Fusion
- subwoofer Neumann
- subwoofer Magnat
- subwoofer Pyle
- subwoofer ELAC
- subwoofer Sonus Faber
- subwoofer Marantz
- subwoofer Bowers & Wilkins
- subwoofer Vonyx
- subwoofer Peavey
- subwoofer Harman Kardon
- subwoofer JL Audio
- subwoofer REL Acoustics
- subwoofer Teufel
- subwoofer Dali
- subwoofer Proel
- subwoofer Focal
- subwoofer Kicker
- subwoofer Omnitronic
- subwoofer Mackie
- subwoofer Deaf Bonce
- subwoofer SVS
- subwoofer Arcam
- subwoofer Infinity
- subwoofer McIntosh
- subwoofer Dynacord
- subwoofer Hertz
- subwoofer Atlas Sound
- subwoofer Definitive Technology
- subwoofer PowerBass
- subwoofer Kanto
- subwoofer Rockford Fosgate
- subwoofer Canton
- subwoofer Monacor
- subwoofer Tannoy
- subwoofer SPL
- subwoofer Indiana Line
- subwoofer HK Audio
- subwoofer Fenton
- subwoofer Sonance
- subwoofer Cabasse
- subwoofer Sonos
- subwoofer Musway
- subwoofer Renegade
- subwoofer MB Quart
- subwoofer Atlantic
- subwoofer QSC
- subwoofer Genelec
- subwoofer Apart
- subwoofer Eve Audio
- subwoofer FBT
- subwoofer Soundstream
- subwoofer Citronic
- subwoofer Wet Sounds
- subwoofer Morel
- subwoofer Mtx Audio
- subwoofer GoldenEar Technology
- subwoofer Velodyne
- subwoofer Chrysalis
- subwoofer IMG Stage Line
- subwoofer Sound Ordnance
- subwoofer MadBoy
Najnowsze instrukcje dla subwoofer
19 Września 2024
19 Września 2024
19 Września 2024
19 Września 2024
19 Września 2024
19 Września 2024
19 Września 2024
19 Września 2024
19 Września 2024
18 Września 2024