Instrukcja obsługi Hartke Pro 1800

Hartke nieskategoryzowany Pro 1800

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Hartke Pro 1800 (4 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/4
18
Stackable
Bass Enclosure
P R O F E S S I O N A L S E R I E S
1800 Introduction and Features
Congratulations on purchasing the 1800 bass enclosure by Hartke! The PRO
Series enclosures have been designed to provide excellent tone with a warm
punchy output. The 1800 features an 18-inch, proprietary low frequency driver
with an impregnated fabric surround, and matched convex dust cover all mount-
in rugged carpet with recessed jack plate and ergonomic handle, the 1800 will
provide reliable performance from gig to gig and venue to venue.
In these pages, youʼll find a detailed description of the features of the-1800, as
well as a description of its front and rear panels, step-by-step instructions for its
please donʼt forget to fill it out and mail it in so that you can receive online
technical support and so we can send you updated information about these and
other Samson products in the future.
We recommend you record your serial number in the space provided below for
future reference.
Serial number:
Date of purchase:
Should your unit ever require servicing, a Return Authorization number (RA)
must be obtained before shipping your unit to Samson. Without this number,
the unit will not be accepted. Please call Samson at 1-800-3SAMSON (1-800-
372-6766) for a Return Authorization number prior to shipping your unit. Please
retain the original packing materials and if possible, return the unit in the origi-
nal carton and packing materials.
1800 Features
• 18-inch heavy-duty, Low Frequency
driver
• 3/4" Plywood construction
• Four Tuned Front Ports
• Perforated metal speaker grill
• Recessed metal handles
• Stacking corners
• 1/4-inch phone & Speakon input jacks
• Covered in durable carpet
Connecting the 1800
About Impedance
Before you hook up your speaker cabinet, be sure that you understand a little abou
impedance. Impedance is the electronic load that the speaker puts on the power amplifie
and is measured in Ohms.
the total impedance is cut in half and when two speakers are wire in “Series” the tota
impedance is the sum of the speakers individual impedance.
The
1800
impedance (many audio
guys used the made up word “ohmage”
however the correct term is impedance)
is 4 Ohms. So, when two 1800ʼs are
connected together in parallel, the tota
impedance is 2 Ohms. The impedance
of your speaker also has an effect on
your amplifier. In general, the lower the
impedance, the more power your ampli-
fier will put out.
IMPORTANT
There is a minimum safe
impedance so be sure to check the
manufacturerʼs recommended imped-
ance for your amplifier to avoid any
damage to your amplifier or voiding
your warranty.
Connecting the 1800 to Your Amplifier
The 1800 connections are made via
1/4” phone jacks located on the rea
panel jack-plate. Be sure to make you
connection with un-shielded speaker
cable. Connect the Amplifier Output to
the speaker Input on the 1800ʼs rear
jackplate.
Using the EXTENSION Output
The 1800 provides both 1/4-inch and
Speakon connections. You can use
either connector to connect to your
amplifier head. Since both the 1/4-
inch phone and Speakon connectors
are wired in parallel, you can connect
additional speaker cabinets using eithe
connector as an extension output. Be
sure to read the section above on
impedance to insure a proper hook-up
with your amplifier.
Hartke Systems
Distributed Exclusively by
Samson Technologies Corp.
Hicksville, New York 11802
MODEL 2000
200 WATTS
8
�
= 120 WATTS
4
�
= 200 WATTS
CAUTION
TO PREVENT SHOCK, DO NOT OPEN. NO USER SERVICE-
ABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL. TO PREVENT FIRE OR SHOCK
HAZARD, DO NOT EXPOSE TO RAIN OR MOISTURE.
ASSEMBLED IN R.O.K. SERIAL NUMBER
115
~ AC INPUT
115V/230V 50/60Hz
FUSE
5A/250V, 180W (115V)
2.5A/250V, 450W (230V)
SPEAKER OUTPUTS
8
�
8
�
ON OFF
HPF
EFFECT
SENDRETUIRN

Specyfikacje produktu

Marka: Hartke
Kategoria: nieskategoryzowany
Model: Pro 1800

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Hartke Pro 1800, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje nieskategoryzowany Hartke

Hartke

Hartke 1410 Instrukcja

21 Września 2024
Hartke

Hartke 2115 Instrukcja

21 Września 2024
Hartke

Hartke AC150 Instrukcja

21 Września 2024
Hartke

Hartke B200 Instrukcja

21 Września 2024
Hartke

Hartke B30 Instrukcja

21 Września 2024
Hartke

Hartke HyDrive 210c Instrukcja

21 Września 2024
Hartke

Hartke B60 Instrukcja

21 Września 2024
Hartke

Hartke B600 Instrukcja

21 Września 2024
Hartke

Hartke B20 Instrukcja

21 Września 2024
Hartke

Hartke AC75 Instrukcja

21 Września 2024

Instrukcje nieskategoryzowany

Najnowsze instrukcje dla nieskategoryzowany

Asko

Asko DBI644MIB.S.TW/1 Instrukcja

28 Października 2024
Asko

Asko DFS233IB.S.TW/1 Instrukcja

28 Października 2024
Emko

Emko EZM-9920 Instrukcja

27 Października 2024
Emko

Emko ESM-3712-H Instrukcja

27 Października 2024
Emko

Emko ATS-10 Instrukcja

27 Października 2024
Emko

Emko EAOM-11.2 Instrukcja

27 Października 2024
Emko

Emko EPM-3790 Instrukcja

27 Października 2024
Emko

Emko EPM-7790 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux IAN 108340 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux HG06009A-BS Instrukcja

27 Października 2024