Instrukcja obsługi Hartke 2.5XL

Hartke nieskategoryzowany 2.5XL

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Hartke 2.5XL (4 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/4

2 x10″ Plus 5” Stackable

Aluminum Drive Bass Enclosure

Hartke

2.5XL Introduction and Features

Congratulations on purchasing the 2.5XL bass enclosure by Hartke! The XL

Series enclosures have been designed to provide excellent tone with a fast

attack, deep low-end and punchy output. The 2.5XL Features two 10”, propri-

etary low frequency drivers with specially designed aluminum cones, large voice

coils on Kapton formers, impregnated fabric surrounds, and matched convex

dust covers all mounted in a heavy-duty steel frames. Rounding out the tone is

a proprietary 5” aluminum mid-range driver. Using heavy-duty plywood con-

struction, covered in rugged carpet with recessed jack plate and ergonomic

metal handles, the 2.5XL will provide reliable performance from gig to gig and

venue to venue.

In these pages, you’ll find a detailed description of the features of the 2.5XL , as

well as a description of its front and rear panels, step-by-step instructions for its

setup and use and full specifications. You’ll also find a warranty card enclosed—

please don’t forget to fill it out and mail it in so that you can receive online tech-

nical support and so we can send you updated information about these and

other Samson products in the future.

We recommend you record your serial number in the space provided below for

future reference.

Serial number:

Date of purchase:

Should your unit ever require servicing, a Return Authorization number (RA)

must be obtained before shipping your unit to Samson. Without this number, the

unit will not be accepted. Please call Samson at 1-800-3SAMSON (1-800-372-

6766) for a Return Authorization number prior to shipping your unit. Please

retain the original packing materials and if possible, return the unit in the origi-

nal carton and packing materials.

210 XL Features

• 2 x 10 Inch heavy-duty Aluminum

Low Frequency drivers

• Special Design 5-inch Aluminum

Mid to High-range driver

• 3/4" Plywood construction

• Tuned front shelf port

• Perforated metal speaker grill

• Recessed metal handles

• Stacking corners

• Dual, parallel wired 1/4" jacks

• Covered in durable carpet

About Impedance

Before you hook up your speaker cabinet, be sure that you understand a little about

impedance. Impedance is the electronic load that the speaker puts on the power amplifier

and is measured in Ohms.

Here is the tricky, yet simple rule of impedance: When two speakers, of equal impedance

are wired in "Parallel", the total imped-

ance is cut in half and when two speak-

ers are wire in “Series”, the total imped-

ance is the sum of the speakers individ-

ual impedance.

The 2.5XL impedance is 8 Ohms. So,

when two 2.5XL’s are connected

together in parallel, the total impedance

is 4 Ohms. The impedance of your

speaker also has an effect on your

amplifier. In general, the lower the

impedance, the more power your ampli-

fier will put out.

IMPORTANT: There is a minimum safe

impedance so be sure to check the

manufacturer’s recommended imped-

ance for your amplifier to avoid any

damage to your amplifier or voiding

your warranty.

Connecting the 2.5XL to Your Amplifier

The 2.5XL connections are made via

1/4” phone jacks located on the rear

panel jack-plate. Be sure to make your

connection with un-shielded speaker

cable. Connect the Amplifier Output to

the speaker Input on the 2.5XL’s rear

jackplate.

Using the EXTENSION Output

The 2.5XL provides a convenient

Extension Output for connecting addi-

tional speaker cabinets in parallel. Be

sure to read the section above on

impedance to insure a proper hook up

with your amplifier. Follow the steps

below to connect two 2.5XL’s using the

Extension Output. Connect the

Amplifier Output to the Input of the first

2.5XL. Now, connect the Extension

Output to the Input of the second

2.5XL.

Har t ke Sys t e ms

Distributed Exclusively by

Samso n Technolo gies Co rp.

Hicksv ille, New York 11802

MOD EL 2000

200 WATTS

= 120 WATTS

= 200 WATTS

CAUTION

TO PREVENT SHOCK, DO NOT OPEN. NO US ER S ERVICE-

ABLE PARTS INS IDE. REFER S ERVICING TO QUALIFIED

SERVICE PERSONNEL. TO PREVENT FIRE OR S HOCK

HAZ ARD, DO NOT EXPOSE TO RAIN OR MOISTURE.

ASSEMBLED IN R.O.K. S ERIAL NUMBER

115

~ AC INPUT

115V/230V 50/60Hz

FUSE

5A/2 50V, 180 W (115 V)

2.5A/2 50V, 450W (230V)

SP EAKER OUTPU TS

ON OFF

HPF

EFFE CT

SENDRETUIRN

2.5XL BASS CA BINE T

200 WATT S

Hartke

8 EXTENS ION

INPU TS

MADE IN CHIN A

S ERIAL N UMBER

Hartke S y s te m s Dis tribu worldwide by S a m s on Te chnologies

www.hartke .com

Connecting the 2.5XL

Har t ke Sys t e ms

Distributed Exclusively by

Samso n Technolo gies Co rp.

Hicksv ille, New York 11802

MOD EL 2000

200 WATTS

= 120 WATTS

= 200 WATTS

CAUTION

TO PREVENT SHOCK, DO NOT OPEN. NO US ER S ERVICE-

ABLE PARTS INS IDE. REFER S ERVICING TO QUALIFIED

SERVICE PERSONNEL. TO PREVENT FIRE OR S HOCK

HAZ ARD, DO NOT EXPOSE TO RAIN OR MOISTURE.

ASSEMBLED IN R.O.K. S ERIAL NUMBER

115

~ AC INPUT

115V/230V 50/60Hz

FUSE

5A/2 50V, 180 W (115 V)

2.5A/2 50V, 450W (230V)

SP EAKER OUTPU TS

ON OFF

HPF

EFFE CT

SENDRETUIRN

2.5XL BASS CA B N ET

200 WATT S

Hartke

8 EXTENS ION

INPU TS

MADE IN CHIN A

S ERIAL N UMBER

Hartke S y s te m s Dis tribute d wo wide by S a m s on Te chnologies

www.hartke .com

2.5XL BASS CA BINE T

200 W T T S

Hartke

8 EXT S ION

INPU TS

ADE IN CHIN A

S ERIAL N UMBER

Hartke S y s te m s Dis tribute d ldwide by S a m s on Te chnologies

www.hartke .com

Specyfikacje produktu

Marka:	Hartke
Kategoria:	nieskategoryzowany
Model:	2.5XL
Źródło zasilania:	Prąd przemienny
Długość przewodu:	3 m
Częstotliwość wejściowa AC:	50 Hz
Napięcie wejściowe AC:	230 V
Waga produktu:	6000 g
Moc pobierana:	1500 W
Energia uderzenia:	4.5 J
Wskaźnik nacisku:	3200 bpm
Średnica wiertła w betonie (max):	36 mm
Prędkość znamionowa:	750 RPM
Walizka:	Tak
Rodzaj zacisku:	SDS Plus
Dodatkowa rękojeść:	Tak
Głębokościomierz dołączony:	Tak