Instrukcja obsługi Hartke 210TP

Hartke nieskategoryzowany 210TP

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Hartke 210TP (4 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 20 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/4
2 x10″Stackable
Bass Enclosure
Hartke
SERIES
210TP Introduction and Features
Congratulations on purchasing the 410TP bass enclosure by Hartke! The
Transporter Series enclosures have been designed to provide excellent tone
with a fast attack, deep low-end and punchy output. The 210TP Features two
10”, proprietary low frequency drivers with specially designed aluminum cones,
large voice coils on Kapton formers, impregnated fabric surrounds, and matched
convex dust covers all mounted in a heavy- duty steel frame. Using heavy-duty
plywood construction, covered in rugged carpet with recessed jack plate and
ergonomic handle, the 210TP will provide reliable performance from gig to gig
and venue to venue.
In these pages, you’ll find a detailed description of the features of the 410TP, as
well as a description of its front and rear panels, step-by-step instructions for its
setup and use and full specifications. You’ll also find a warranty card enclosed—
please don’t forget to fill it out and mail it in so that you can receive online tech-
nical support and so we can send you updated information about these and
other Samson products in the future.
We recommend you record your serial number in the space provided below for
future reference.
Serial number:
Date of purchase:
Should your unit ever require servicing, a Return Authorization number (RA)
must be obtained before shipping your unit to Samson. Without this number, the
unit will not be accepted. Please call Samson at 1-800-3SAMSON (1-800-372-
6766) for a Return Authorization number prior to shipping your unit. Please
retain the original packing materials and if possible, return the unit in the origi-
nal carton and packing materials.
410TP Features
• 2 x 10 Inch heavy-duty Low
Frequency drivers
• 3/4" Plywood construction
• Tuned Rear Port
• Perforated metal speaker grill
• Recessed handles
• Stacking corners
• Dual, parallel wired 1/4" jacks
• Covered in durable carpet
About Impedance
Before you hook up your speaker cabinet, be sure that you understand a little about
impedance. Impedance is the electronic load that the speaker puts on the power amplifier
and is measured in Ohms.
Here is the tricky, yet simple rule of impedance: When two speakers are wired in "Parallel"
the total impedance is cut in half and
when two speakers are wire is “Series”
the total impedance is the sum of the
speakers individual impedance.
The 210TP impedance is 8 Ohms. So,
when two 210TP’s are connected
together in parallel, the total impedance
is 4 Ohms. The impedance of your
speaker also has an effect on your
amplifier. In general, the lower the
impedance, the more power your ampli-
fier will put out.
IMPORTANT: There is a minimum safe
impedance so be sure to check the
manufacturer’s recommended imped-
ance for your amplifier to avoid any
damage to your amplifier or voiding
your warranty.
Connecting the 210TP to Your Amplifier
The 210TP connections are made via
1/4” phone jacks located on the rear
panel jack-plate. Be sure to make your
connection with un-shielded speaker
cable. Connect the Amplifier Output to
the speaker Input on the 210TP’s rear
jackplate.
Using the EXTENSION Output
The 210TP provides a convenient
Extension Output for connecting addi-
tional speaker cabinets in parallel. Be
sure to read the section above on
impedance to insure a proper hook up
with your amplifier. Follow the steps
below to connect two 210TP’s using the
Extension Output. Connect the
Amplifier Output to the Input of the first
210TP. Now, connect the Extension
Output to the Input of the second
210TP.
210 P BASS CABI NET
150 WAT T S
Hartke
8 EXTENS IO N
INPUTS
MADE IN CHINA
S ERIAL N UMBER
Hartke S ys tem istribute d worldwide by S a m s on Te chnologies
www.hartke .com
Har t ke Sys t e ms
Distributed Exclusively by
Samso n Technolo gies Co rp.
Hicksv ille, New York 11802
MOD EL 2000
200 WATTS
8
= 120 WATTS
4
= 200 WATTS
CAUTION
TO PREVENT SHOCK, DO NOT OPEN. NO US ER S ERVICE-
ABLE PARTS INS IDE. REFER S ERVICING TO QUALIFIED
SERVICE PERSONNEL. TO PREVENT FIRE OR S HOCK
HAZ ARD, DO NOT EXPOS E TO RAIN OR MOISTURE.
ASSEMBLED IN R.O.K. SERIAL NUMBER
115
~ AC INPUT
115V/230V 50/60Hz
FUSE
5A/2 50V, 180 W (115 V)
2.5A/2 50V, 450W (230V)
SP EAKER OUTPU TS
8
ON OFF
HPF
EFFE CT
SENDRETUIRN
8
Connecting the 210TP
210 P BASS C ABINE T
150 WAT T S
Hartke
8 EXT SI ON
INPUTS
MADE IN CHINA
S ERIAL N UMBER
Hartke S ys tem istribute d worldwide by S a m s on Te chnologies
www.hartke .com
210 P BASS C ABINE T
150 WAT T S
Hartke
8 EXT SI ON
INPUTS
MADE IN CHINA
S ERIAL N UMBER
Hartke S ys tem istribute d worldwide by S a m s on Te chnologies
www.hartke .com
210T P BASS CABI ET
150 WAT T S
Hartke
8 EXTENS IO N
PUTS
MADE IN CHINA
S ERIAL N UMBER
Hartke S ys tems Distribute d worldwide am s on Te chnologies
www.hartke .com
Har t ke Sys t e ms
Distributed Exclusively by
Samso n Technolo gies Co rp.
Hicksv ille, New York 11802
MOD EL 2000
200 WATTS
8
= 120 WATTS
4
= 200 WATTS
CAUTION
TO PREVENT SHOCK, DO NOT OPEN. NO US ER S ERVICE-
ABLE PARTS INS IDE. REFER S ERVICING TO QUALIFIED
SERVICE PERSONNEL. TO PREVENT FIRE OR S HOCK
HAZ ARD, DO NOT EXPOS E TO RAIN OR MOISTURE.
ASSEMBLED IN R.O.K. SERIAL NUMBER
115
~ AC INPUT
115V/230V 50/60Hz
FUSE
5A/2 50V, 180 W (115 V)
2.5A/2 50V, 450W (230V)
SP EAKER OUTPU TS
8
ON OFF
HPF
EFFE CT
SENDRETUIRN
8

Specyfikacje produktu

Marka: Hartke
Kategoria: nieskategoryzowany
Model: 210TP

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Hartke 210TP, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje nieskategoryzowany Hartke

Hartke

Hartke 1410 Instrukcja

21 Września 2024
Hartke

Hartke 2115 Instrukcja

21 Września 2024
Hartke

Hartke AC150 Instrukcja

21 Września 2024
Hartke

Hartke B200 Instrukcja

21 Września 2024
Hartke

Hartke B30 Instrukcja

21 Września 2024
Hartke

Hartke HyDrive 210c Instrukcja

21 Września 2024
Hartke

Hartke B60 Instrukcja

21 Września 2024
Hartke

Hartke B600 Instrukcja

21 Września 2024
Hartke

Hartke B20 Instrukcja

21 Września 2024
Hartke

Hartke AC75 Instrukcja

21 Września 2024

Instrukcje nieskategoryzowany

Najnowsze instrukcje dla nieskategoryzowany

Meec Tools

Meec Tools 010-084 Instrukcja

6 Października 2024
Outwell

Outwell Scenic Road 250 Instrukcja

5 Października 2024
Impact

Impact Qualite QL-3560-LED Instrukcja

4 Października 2024
Impact

Impact QuikBalance Instrukcja

4 Października 2024
Impact

Impact CA-112 Instrukcja

4 Października 2024
Impact

Impact Forever Ready Cool FRC-24-LED Instrukcja

4 Października 2024
Impact

Impact LS-BHA Instrukcja

4 Października 2024
Impact

Impact LKB-5C Instrukcja

4 Października 2024
Impact

Impact Varipole Drop Ceiling Adapter Instrukcja

4 Października 2024
Impact

Impact RST-001 Instrukcja

4 Października 2024