Instrukcja obsługi Hartke 115TP

Hartke nieskategoryzowany 115TP

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Hartke 115TP (4 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 16 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/4

1 x15″Stackable

Bass Enclosure

Hartke

SERIES

115TP Introduction and Features

Congratulations on purchasing the 115TP bass enclosure by Hartke! The

Transporter Series enclosures have been designed to provide excellent tone

with a fast attack, deep low-end and punchy output. The 115TP Features a 15”,

proprietary low frequency driver with specially designed aluminum cone, large

voice coil on Kapton former, impregnated fabric surround, and matched convex

dust cover all mounted in a heavy-duty steel frame. Using heavy-duty plywood

construction, covered in rugged carpet with recessed jack plate and ergonomic

handle, the 115TP will provide reliable performance from gig to gig and venue to

venue.

In these pages, you’ll find a detailed description of the features of the 115TP, as

well as a description of its front and rear panels, step-by-step instructions for its

setup and use and full specifications. You’ll also find a warranty card enclosed—

please don’t forget to fill it out and mail it in so that you can receive online tech-

nical support and so we can send you updated information about these and

other Samson products in the future.

We recommend you record your serial number in the space provided below for

future reference.

Serial number:

Date of purchase:

Should your unit ever require servicing, a Return Authorization number (RA)

must be obtained before shipping your unit to Samson. Without this number, the

unit will not be accepted. Please call Samson at 1-800-3SAMSON (1-800-372-

6766) for a Return Authorization number prior to shipping your unit. Please

retain the original packing materials and if possible, return the unit in the origi-

nal carton and packing materials.

115TP Features

• 1 x 15 Inch heavy-duty aluminum

Low Frequency drivers

• 3/4" Plywood construction

• Dual Tuned Front Ports

• Perforated metal speaker grill

• Recessed handles

• Stacking corners

• Dual, parallel wired 1/4" jacks

• Covered in durable carpet

About Impedance

Before you hook up your speaker cabinet, be sure that you understand a little about

impedance. Impedance is the electronic load that the speaker puts on the power amplifier

and is measured in Ohms.

Here is the tricky, yet simple rule of impedance: When two speakers, of equal impedance

are wired in "Parallel" the total imped-

ance is cut in half and when two speak-

ers are wire is “Series” the total imped-

ance is the sum of the speakers individ-

ual impedance.

The 115TP impedance is 8 Ohms. So,

when two 115TP’s are connected

together in parallel, the total impedance

is 4 Ohms. The impedance of your

speaker also has an effect on your

amplifier. In general, the lower the

impedance, the more power your ampli-

fier will put out.

IMPORTANT: There is a minimum safe

impedance so be sure to check the

manufacturer’s recommended imped-

ance for your amplifier to avoid any

damage to your amplifier or voiding

your warranty.

Connecting the 115TP to Your Amplifier

The 115TP connections are made via

1/4” phone jacks located on the rear

panel jack-plate. Be sure to make your

connection with un-shielded speaker

cable. Connect the Amplifier Output to

the speaker Input on the 115TP’s rear

jackplate.

Using the EXTENSION Output

The 115TP provides a convenient

Extension Output for connecting addi-

tional speaker cabinets in parallel. Be

sure to read the section above on

impedance to insure a proper hook up

with your amplifier. Follow the steps

below to connect two 115TP’s using the

Extension Output. Connect the

Amplifier Output to the Input of the first

115TP. Now, connect the Extension

Output to the Input of the second

115TP.

115TP BAS S CABI NET

150 WAT T S

Hartke

8 EXTENS I O N

IN PU TS

MADE IN CH INA

SERIAL N UMBER

Hartke S y s t e ms Dis tribu worldwide by S a m s on Te chnologie s

www.ha rtke .com

Har t ke Sys t e ms

Dis tributed Ex clus ively by

Samso n Technolo gies Co rp.

Hic ksville, New Y ork 11802

MOD EL 2000

200 WATTS

= 120 WA TTS

= 200 WA TTS

CAUTION

TO PREVENT SHOCK, DO NOT OPEN. NO US ER S ERVICE-

ABLE PARTS INS IDE. REFER S ERVICING TO QUALIFIED

SERVICE PERSONNEL. TO PREVENT FIRE OR S HOCK

HAZ ARD, DO NOT EXPOS E TO RAIN OR MOIS TURE.

ASSEMBLED IN R.O.K. SERIAL NUMBER

115

~ AC INPUT

115V/230V 50/60Hz

FUSE

5A/2 50V, 180 W (115 V)

2.5A/2 50V, 450W (230V)

SP EAKER OUTPU TS

ON OFF

HPF

EFFE CT

SENDRETUIRN

Connecting the 115TP

115TP ASS CABINE T

150 WAT T S

Hartke

8 EXT IO N

IN PU TS

ADE IN CH INA

SERIAL N UMBER

Hartke S y s t e ms ribute d worldwide by S a m s on Te chnologie s

www.ha rtke .com

115TP BAS S CABI ET

150 WAT T S

Hartke

8 EXTENS I O N

PU TS

MADE IN CH INA

SERIAL N UMBER

Hartke S y s t e ms Dis tribute d worldwide a ms on Technologies

wwwha rtke com

Har t ke Sys t ems

Distributed Ex clus ively by

Sams o n Techno logies Co rp.

Hic ksville, New Yo rk 11802

MOD EL 2000

200 WATTS

= 120 WATTS

= 200 WATTS

CAUTION

TO PREV ENT SHOCK, DO NOT OPEN. NO US ER SERVICE-

ABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL. TO PREVENT FIRE OR S HOCK

HAZ ARD, DO NOT EXPOSE TO RAIN OR MOISTURE.

ASSEMBLED IN R.O.K.

SERIAL NUMBER

115

~ AC INPUT

115 V/230V 5 0/60Hz

FUSE

5A/2 50V, 180W (115V)

2.5A/25 0V, 450W (2 30V)

SP EAKER O UTPUTS

ON OFF

HPF

EFFE CT

SENDRETUIRN

Specyfikacje produktu

Marka:	Hartke
Kategoria:	nieskategoryzowany
Model:	115TP
Kolor produktu:	Stal nierdzewna
Liczba źródeł światła:	2 szt.
Rodzaj żarówki:	LED
Wysokość produktu:	- mm
Szerokość produktu:	840 mm
Głębokość produktu:	274 mm
W zestawie pilot zdalnego sterowania:	Tak
Poziom hałasu:	60 dB
Obciążenie:	104 W
Klasa wydajności energetycznej:	A
Model:	Wbudowany sufit
Roczne zużycie energii:	25.1 kWh
Prędkości:	4
Możliwość mycia filtra:	Tak
Maksymalna moc ekstrakcji:	725 m³/h
Rodzaj ekstrakcji:	Kanałowe / obiegowe
Klasa wydajności przepływu dynamicznego:	A
Klasa wydajności świecenia:	A
Klasa skuteczności filtra przeciwtłuszczowego:	E
Rodzaj filtra tłuszczu:	Metal
Filtr odporny na zmywanie w zmywarce:	Tak
Zdjemowalny filtr:	Tak
Moc silnika:	- W
Silnik dołączony:	Tak
Ilość silników:	1
Prędkość w trybie intensywnym:	Tak
Poziom hałasu (wysoka prędkość):	60 dB
Wskaźnik czyszenia filtra:	Tak
Minimalna odległość od płyty gazowej:	60 mm
Minimalna odległość od płyty elektrycznej:	50 mm
Średnica przyłącza odprowadzającego dym:	150 mm
Liczba filtrów:	1 szt.
Lokalizacja wydechu:	Dolne