Instrukcja obsługi Hanwha QNP-6320

Hanwha Kamera monitorująca QNP-6320

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Hanwha QNP-6320 (35 stron) w kategorii Kamera monitorująca. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/35
NETWORK CAMERA
User Manual
QNP-6320H/QNP-6320
QNP-6250H/QNP-6250
Copyright
©2021 Hanwha Techwin Co., Ltd. All rights reserved.
Trademark
Each of trademarks herein is registered. The name of this product and other trademarks mentioned in this manual are the registered trademark of their
respective company.
Restriction
Copyright of this document is reserved. Under no circumstances, this document shall be reproduced, distributed or changed, partially or wholly, without
formal authorization.
Disclaimer
Hanwha Techwin makes the best to verify the integrity and correctness of the contents in this document, but no formal guarantee shall be
provided. Use of this document and the subsequent results shall be entirely on the user’s own responsibility. Hanwha Techwin reserves the
right to change the contents of this document without prior notice.
※Design and specications are subject to change without prior notice.
※The initial administrator ID is “admin” and the password should be set when logging in for the rst time.
Please change your password every three months to safely protect personal information and to prevent the damage of the information
theft.
Please, take note that it’s a user’s responsibility for the security and any other problems caused by mismanaging a password.
Network Camera
User Manual
English _3
!OVERVIEW
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean the contaminated area on the product surface with a soft, dry cloth or a damp cloth.
(Do not use a detergent or cosmetic products that contain alcohol, solvents or surfactants or oil constituents
as they may deform or cause damage to the product.)
7. Do not block any ventilation openings, Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and
the point where they exit from the apparatus.
11. Only use attachments/ accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer,
or sold with the apparatus. When a cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lighting storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
15. This product is intended to be supplied by a Listed Power Supply Unit marked “Class 2” or “LPS” or “PS2”
and rated from PoE(53 Vdc), 0.44A. (QNP-6320H/QNP-6250H)
16. This product is intended to be supplied by a Listed Power Supply Unit marked “Class 2” or “LPS” or “PS2”
and rated from PoE(53 Vdc), 0.28A. (QNP-6320/QNP-6250)
17. This product is intended to be supplied by isolation power.
18. If you use excessive force when installing the product, the camera may be damaged and malfunction.
If you forcibly install the product using non-compliant tools, the product may be damaged.
19. Do not install the product in a place where chemical substances or oil mist exists or may be generated. As
edible oils such as soybean oil may damage or warp the product, do not install the product in the kitchen or
near the kitchen table.
This may cause damage to the product.
20. When installing the product, be careful not to allow the surface of the product to be stained with chemical
substance.
Some chemical solvents such as cleaner or adhesives may cause serious damage to the product’s surface.
21. If you install/disassemble the product in a manner that has not been recommended, the production functions/
performance may not be guaranteed.
Install the product by referring to “Installation & connection” in the user manual.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT
TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT THROUGH THE
VENTILATION GRILLS OR OTHER OPENNINGS ON THE EQUIPMENT.
Apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids,
such as vases, shall be placed on the apparatus.
To prevent injury, this apparatus must be securely attached to the Wall/ceiling in accordance
with the installation instructions.
Pan/Tilt/Zoom motors and slip ring are warrantied for one year under continuous
operation.
CAUTION
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK.
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
EXPLANATION OF GRAPHICAL SYMBOLS
The lightning flash with arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of “dangerous voltage” within the
product’s enclosure that may be of sufficient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to
the presence of important operating and maintenance (servicing) instructions in
the literature accompanying the product.
overview
22. Installing or using the product in water can cause serious damage to the product.
23. If your product works normal, the degree of preset precision is 0.2˚. In the case of reboot due to outage,
firmware upgrade, etc., its tolerance might have to be adjusted after checking for any changes in Preset setup.
overview
4_ overview
Class construction
An apparatus with CLASS construction shall be connected to a MAINS socket outlet with a
protective earthing connection.
Battery
Batteries(battery pack or batteries installed) shall not be exposed to excessive heat such as
sunshine, fire or the like.
The battery cannot be replaced.
Disconnection Device
Disconnect the main plug from the apparatus, if it’s defected. And please call a repair man in
your location.
When used outside of the U.S., it may be used HAR code with fittings of an approved
agency is employed.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
ATTENTION
IL Y A RISQUE D’EXPLOSION SI LA BATTERIE EST REMPLACÉE PAR UNE BATTERIE DE
TYPE INCORRECT.
METTRE AU REBUT LES BATTERIES USAGÉES CONFORMÉMENT AUX INSTRUCTIONS.
CAUTION
These servicing instructions are for use by qualified service personnel only.
To reduce the risk of electric shock do not perform any servicing other than that contained in
the operating instructions unless you are qualified to do so.
Please use the input power with just one camera and other devices must not be connected.
The ITE is to be connected only to PoE networks without routing to the outside plant.
The wired LAN hub providing power over the Ethernet (PoE) in accordance with IEEE
802.3at shall be a UL Listed device with the output evaluated as a Limited Power Source as
defined in UL60950-1 or PS2 as defined in UL62368-1.
Unit is intended for installation in a Network Environment 0 as defined in IEC TR 62102.
As such, associated Ethernet wiring shall be limited to inside the building.
Please read the following recommended safety precautions carefully.
~Do not place this apparatus on an uneven surface.
~Do not install on a surface where it is exposed to direct sunlight, near heating equipment or
heavy cold area.
~Do not place this apparatus near conductive material.
~Do not attempt to service this apparatus yourself.
~Do not place a glass of water on the product.
~Do not install near any magnetic sources.
~Do not block any ventilation openings.
~Do not place heavy items on the product.
~Please wear protective gloves when installing/removing the camera.
The high temperature of the product surface may cause a burn.
User’s Manual is a guidance book for how to use the products.
The meaning of the symbols are shown below.
~Reference : In case of providing information for helping of product’s usages
~Notice : If there’s any possibility to occur any damages for the goods and human caused by
not following the instruction
※Please read this manual for the safety before using of goods and keep it in the safe place.
We do not guarantee the quality of third-party products (e.g. lenses, accessories) that you
separately purchase.
In particular installation environments, there might be interference in radio communications.
When interference of electromagnetic waves occurs between the product and radio
communication device, it is recommended to keep a certain distance between the two or
change the direction of the receiving antenna.
English _5
!OVERVIEW
CONTENTS
OVERVIEW
3
3 Important Safety Instructions
6 Recommended PC Specifications
6 Recommended Micro SD/SDHC/SDXC
Memory Card Specifications
6 NAS recommended specs
PTZ CAMERA (QNP-6320/QNP-6250)
8
8 What’s Included
8 Optional Accessories for Installation
9 At a Glance
10 Installation
PTZ CAMERA (QNP-6320H/QNP-6250H)
14
14 What’s Included
14 Network I/O box - separately sold product
15 Optional Accessories for Installation
15 At a Glance
17 Installation
INSTALLATION & CONNECTION
24
24 Connecting with other Device
NETWORK CONNECTION AND
SETUP
26
26 Connecting the Camera Directly to Local
Area Networking
26 Connecting the Camera Directly to a DHCP
Based DSL/Cable Modem
27 Using Device Manager
27 Automatically searching camera
27 Configuring IP address
28 Manually registering camera
28 Automatically configuring IP
29 Port Range Forward (Port Mapping) Setup
30 Connecting to the Camera from a Shared
Local PC
30 Connecting to the Camera from a Remote
PC via the Internet
WEB VIEWER
31
31 Connecting to the Camera
32 Password setting
32 Login
32 Camera Web Viewer Setup
APPENDIX
33
33 Troubleshooting
overview
6_ overview
RECOMMENDED PC SPECIFICATIONS
~CPU : Intel(R) Core(TM) i7 3.4 GHz or higher
~RAM : 8G or higher
~Supported OS : MS Windows 8.1, 10, Mac OS X 10.13
~Recommended browser: Google Chrome
~Supported browsers: MS Explore11, MS Edge, Mozilla Firefox (Window 64bit only), Apple Safari (Mac OSX only)
~VGA : PCIe 256MB GDDR3 video graphics card or higher
※Some functions may be restricted even in supported browsers.
RECOMMENDED MICRO SD/SDHC/SDXC MEMORY CARD
SPECIFICATIONS
~Recommended capacity : 16GB to 256GB (MLC type required)
~Recommended Manufacturers : SanDisk, Transcend
~Product Type : High endurance
~The compatibility varies depending on the card manufacturers and types.
NAS RECOMMENDED SPECS
~Recommended capacity : 200GB or higher is recommended.
~For this camera, you are recommended to use a NAS with the following manufacturer’s specs.
Recommended products : QNAP NAS, Synology NAS
English _7
!OVERVIEW
QNP-6320/QNP-6250 QNP-6320H/QNP-6250H
8 14
8_ PTZ camera (QNP-6320/QNP-6250)
PTZ camera (QNP-6320/QNP-6250)
WHAT’S INCLUDED
Please check if your camera and accessories are all included in the product package.
(As for each sales country, accessories are not the same.)
Appearance DescriptionItem Name Quantity
Camera
1
Quick Guide
(Optional)
1
Installation base
1
If installing it indoors or in a ceiling housing
Template
1
Product installation guide
Insulation Sheet
1
Use when installing the camera at highly humid place
M
`Use installation screws of at least M4, L30 for the installation of this product.
OPTIONAL ACCESSORIES FOR INSTALLATION
You can purchase appropriate optional accessories available.
Hanging Mount Outdoor housing Indoor built-in housing
SBP-301HM3 SHP-3701H SHP-3701F
* This mount can be used after being attached to hanging mount
SBP-300LMW (Parapet Mount)
SBP-300CMW (Ceiling Mount)
SBP-300WMW (Wall Mount)
SBP-300WMW1 ( Wall Mount)
SBP-300PMW (Pole Mount)
SBP-300PMW1 (Pole Mount)
SBP-300KMW (Corner Mount)
SBP-300KMW1 (Corner Mount)
English _9
!PTZ CAMERA (QNP-6320/QNP-6250)
AT A GLANCE
Outside
Item Description
aMain unit Protects the internal PTZ mechanism from the direct sunlight or external impact.
bDome Cover Dome cover for the lens and unit protection.
cMicro SD Card slot Compartment for the Micro SD card.
dReset Button
The button restores all camera settings to the factory default.
Press and hold for about 5 seconds to reboot the system.
J If you reset the camera, the network settings will be adjusted so that DHCP can be
enabled. If there is no DHCP server in the network, you must run the Device Manager
program to change the basic network settings such as IP address, Subnet mask,
Gateway, etc., before you can connect to the network.
a
bd
c
Bottom View of Installation
Base
Item Description
aAudio Input Port Used to connect the audio input cable.
bAudio Output Port Used to connect the audio output cable.
cAlarm I/O Port Used to connect the alarm I/O cable.
dNetwork Port Port for connection with the network using an Ethernet cable.
Inner View of Installation Base
c
a b
d
PTZ camera (QNP-6320/QNP-6250)
10_ PTZ camera (QNP-6320/QNP-6250)
INSTALLATION
Precautions before installation
Ensure you read out the following instructions before installing the camera:
~Select an installation site that can hold at least 5 times the camera’s weight.
~Stuck-in or peeled-off cables can cause damage to the product or a fire.
~For safety purposes, keep anyone else away from the installation site.
And put aside personal belongings from the site, just in case.
~If the product is installed with excessive force, it may cause damage to the camera due to malfunction.
Forcing assembly using non-compliant tools may damage the product.
Installing by surface attachment
`Attaching Template & Installing installation base
1. Attach the provided template on the ceiling. Based on the template, drill a 86mm hole in the ceiling and
arrange the wires through the hole.
2. Install installation base as shown.
3. Before installing the exposed bracket, open the hinged door at the bottom of the bracket as shown in the
picture. Hold the knob on the hinged door to open it.
Template
J
`In the case of installing the camera at highly humid place, install it on the ceiling after attaching the enclosed insulation sheet
on the back of install base.
<Attaching insulatioin sheet>
Insulation Sheet
`Connect Terminal Wires
1. Connect the cables to the terminal block on the hinged door. Refer to “ ”. Camera Wiring Interface Board
(page 11)
2. Once the wiring is complete, close the hinged door.
J
`Do not connect the camera to a power outlet until the installation is complete. Supplying power while the installation is in
progress may cause fire or damage the product.
English _11
!PTZ CAMERA (QNP-6320/QNP-6250)
`Camera Wiring Interface Board
For the camera wiring, please refer to the picture below.
Refer to Control Signal Connection Diagram
PoE+
Audio
IN
Audio
OUT
Alarm
Alarm Input
Alarm output
J
`Select Normal Open in the setup menu.
-The sensor input is activated during a short for contact type, or when it is at “Low” level for the active type.
`Select Normal Close from the Setup menu.
-The sensor input is activated when open for the contact type or when in high impedance state (open collector) for the
active type.
`The maximum capacity of the alarm output terminal is 30V DC/2A, 125V AC/0.5A and 250V AC/0.25A.
`When connecting alarm input and output cables, be sure to connect one cable to each terminal respectively.
`To connect products over the camera’s capacity, please use an additional relay device.
`If power and GND cables are connected inappropriately to the NC/NO or COM port, a fire or breakdown of equipment may
occur.
`Connecting Camera Safety Cable and Attaching Camera
1. First, as shown in the left hand picture, pull out the safety cable from the base and then hook it to the
mount. The safety cable is coiled inside the base.
`To attach the camera to the mount, refer to the alignment guide marks as shown in the picture.
2. Carefully attach the camera to the mount following the alignment guide marks as shown in the picture.
J
`Make sure to hook the camera’s safety cable to the mount before proceeding. Otherwise you may be exposed to serious
injury caused by the camera falling.
Align the
Direction Guides
Direction
Guides
Direction
Guides
PTZ camera (QNP-6320/QNP-6250)
12_ PTZ camera (QNP-6320/QNP-6250)
`To attach or detach the camera, refer to the picture.
~Attaching the Camera : Push up the camera unit and rotate it clockwise until it cannot be rotated
anymore, as shown in the figure. After rotation, fasten the screws assembled to the install base.
< To Attach the Camera >
~Detaching the Camera : Unfasten the screws as shown in the figure, push in the hook, and rotate it
counterclockwise.
(The screws are not completely disassembled.)
When the hook does not rotate any more, pull down the camera unit and separate it.
< To Detach the Camera >
Inserting a Micro SD card
1. Turn the dome cover in the direction of the arrow to release it.
2. Pull up the Micro SD card cover.
3. Insert Micro SD cards in the direction of the arrows as shown in the figure.
J
`Disconnect the power cable from the camera before inserting the Micro SD card.
`When it rains or the humidity is high, insertion or ejection of a Micro SD card is not recommended.
`
When installing/removing the Micro SD card, make sure you put the product body on a flat ground before working on it in order
to prevent accidents due to loss or drop of any parts.
English _13
!PTZ CAMERA (QNP-6320/QNP-6250)
J
`Do not forcefully insert it in the reverse direction. It might damage your Micro SD card and your product.
4. Close the Micro SD card cover.
Removing a Micro SD card
Gently press down on the exposed end of the Micro SD card as shown in the diagram to eject the Micro SD
card from the slot.
J
`Before removing the Micro SD card, in < >, set the device to < > and press the [Setup ( )>-< >-<Event Storage Off Apply]
button and turn the camera off.
`If you turn off the camera or remove the Micro SD card that contains data from the product, the data may be lost or damaged.
Assembling the Dome Cover
Turn the dome cover clockwise to join it.
Preparing & Installing Camera Mount
For installation guidelines for mounts, refer to the installation manual that is enclosed with the mount.
M
`See “Optional Accessories for Installation” for the appearance of each mount (unbundled). (page 8)
14_ PTZ camera (QNP-6320H/QNP-6250H)
PTZ camera (QNP-6320H/QNP-6250H)
WHAT’S INCLUDED
Please check if your camera and accessories are all included in the product package.
(As for each sales country, accessories are not the same.)
Appearance DescriptionItem Name Quantity
Main Body
1
Quick Guide
(Optional)
1
Cap Installer
1
Used to connect the network cable
Bushing clip
1
Used as a means of preventing cable bushing from
being separated or falling apart from the hole.
Cable Bushing
1
Extra cable bushing for network cable installation.
NETWORK I/O BOX - SEPARATELY SOLD PRODUCT
Appearance Item Name Model NameDescription
Network I/O box
External connection
device for camera’s
alarm and audio I/O
SPM-4210

Specyfikacje produktu

Marka: Hanwha
Kategoria: Kamera monitorująca
Model: QNP-6320

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Hanwha QNP-6320, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Kamera monitorująca Hanwha

Hanwha

Hanwha PNM-C34404RQPZ Instrukcja

3 Października 2024
Hanwha

Hanwha XNO-9083R Instrukcja

2 Października 2024
Hanwha

Hanwha LNO-6012R Instrukcja

2 Października 2024
Hanwha

Hanwha XNV-6081R Instrukcja

2 Października 2024
Hanwha

Hanwha QNO-7022R Instrukcja

1 Października 2024
Hanwha

Hanwha XNO-9082R Instrukcja

1 Października 2024
Hanwha

Hanwha XNV-8081RE Instrukcja

1 Października 2024
Hanwha

Hanwha HCD-6070R Instrukcja

1 Października 2024
Hanwha

Hanwha QND-8020R Instrukcja

1 Października 2024
Hanwha

Hanwha QND-7080R Instrukcja

1 Października 2024

Instrukcje Kamera monitorująca

Najnowsze instrukcje dla Kamera monitorująca

Dahua Technology

Dahua Technology Pro IPC-HDPW5442G-Z Instrukcja

15 Stycznia 2025
Toshiba

Toshiba IKS-WR7412 Instrukcja

13 Stycznia 2025
AVerMedia

AVerMedia FC1320-P Instrukcja

13 Stycznia 2025
Digitus

Digitus OptiMax DN-16037 Instrukcja

13 Stycznia 2025
Hikvision

Hikvision DS-2CE59U1T-AVPIT3ZF Instrukcja

12 Stycznia 2025
Hikvision

Hikvision IDS-2CD7526G0-IZHSY Instrukcja

12 Stycznia 2025
Hikvision

Hikvision DS-2CD2163G0-I(S) Instrukcja

12 Stycznia 2025
Hikvision

Hikvision DS-2CD2H83G1-IZS Instrukcja

12 Stycznia 2025
Speco Technologies

Speco Technologies O5LB1 Instrukcja

12 Stycznia 2025
ZKTeco

ZKTeco AntarVis 2.0 Instrukcja

12 Stycznia 2025