Instrukcja obsługi Haier HLPW028BXW

Haier pralka HLPW028BXW

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Haier HLPW028BXW (120 stron) w kategorii pralka. Ta instrukcja była pomocna dla 21 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/120
Installation and User Manual
Instructions d’installation et
Guide de l’utilisateur
Instrucciones de instalación y
Manual del usuario
HLPW028BXW
Top-Load Clothes Washer
Laveuse à chargement par le haut
Lavadora de ropa con carga superior
Designed for
High- useEciency;
HE detergent.
Conçue pour haute
ecacité; utiliser
un détergent HE.
Diseñada para un
alta useeciencia;
detergente HE (Alta
eciencia).
Part # 0030812994A
HAR # 0570001092 REV A
TABLE OF CONTENTS
WASHER SAFETY 2................................................................................
PARTS AND FEATURES 5.........................................................................
INSTALLATION REQUIREMENTS 6.............................................................
Tools and Parts ............................................................................. 6
Location Requirements ................................................................... 7
Water Supply Requirements ............................................................. 7
Drain System Requirements ............................................................. 7
Electrical Requirements .................................................................. 9
INSTALLATION INSTRUCTIONS 11............................................................
Step 1 - Unpack Washer 11................................................................
Step 2 - Install Bottom Cover 13..........................................................
Step 3 - Install Casters 14..................................................................
Step 4 - Connect and Secure the Drain Hose 16......................................
Step 5 - Connect the Water Hoses 17...................................................
Step 6 - Level the Washer 20..............................................................
Step 7 - Complete Installation 21........................................................
CONTROL PANEL AND FEATURES 22..........................................................
Control Panel 22..............................................................................
Cycle Guide 23................................................................................
WASHER USE 24.....................................................................................
Step 1 - Prepare and Sort Laundry 25....................................................
Step 2 - Add Fabric Care Products 25....................................................
Step 3 - Load the Washer 27...............................................................
Step 4 - Start the Washer 27...............................................................
WASHER CARE 27...................................................................................
Cleaning and Maintenance 28.............................................................
Vacationing 29................................................................................
Moving or Storage Preparation 29........................................................
Reinstalling/Using Washer Again 30.....................................................
TROUBLESHOOTING 31..........................................................................
Error Codes 31...............................................................................
Operation 32..................................................................................
Water 32.......................................................................................
Noise 33.......................................................................................
Clothing 34....................................................................................
LIMITED WARRANTY 35...........................................................................
RECORD KEEPING 36..............................................................................
1
ENGLISH
WASHER SAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and
on your appliance. Always read and obey all safety messages.
DANGER
WARNING
CAUTION
This is the safety alert symbol.
This symbol alerts you to potential hazards that can
kill or hurt you and others. All safety messages will
follow the safety alert symbol and either the word
“DANGER,” “WARNING” or “CAUTION.”
These words mean:
An imminently hazardous situation. You
could be killed or seriously injured if you
don’t immediately follow instructions.
A potentially hazardous situation
which, if not avoided, could result in
death or serious bodily injury.
A potentially hazardous situation
which, if not avoided, may result in
moderate or minor injury.
All safety messages will tell you what the potential hazard is, tell you
how to reduce the chance of injury, and tell you what can happen if the
instructions are not followed.
2
ENGLISH
IMPORTANT SAFETY
INSTRUCTIONS
WARNING: To reduce the risk of electrical shock, injury tore,
persons, or damage when using the washer, follow basic precautions,
including the following:
Read all of the instructions before using this appliance.
Use this appliance only for its intended purpose as described in this
user manual.
Do not place articles that have been previously cleaned in, washed in,
soaked in, or spotted with gasoline, dry-cleaning solvents or other
ammable or explosive substances in the wash water. These
substances give vapors that could ignite or explode.o
Close supervision is necessary if this appliance is used by or near
children. Do not allow children to play on, with, or inside this
appliance.
Do not use the washer for commercial clothes washing.
Under certain conditions, hydrogen gas may be produced in a hot-
water system that has not been used for 2 weeks or more.
HYDROGEN GAS IS EXPLOSIVE. If the hot water system has not been
used for such a period, before using a washing machine, turn on all
hot-water faucets and let the water from each for severalow
minutes. This will release any accumulated hydrogen gas. As the gas
is do not smoke or use an open during this time.ammable, ame
This appliance must be properly installed and located in accordance
with the installation instructions before it is used.
Do not store or install this appliance where it will be exposed to
temperatures below freezing or exposed to weather, which can cause
damage to the appliance.
The appliance must be properly grounded to conform with all
electrical codes and ordinances. See “Electrical Requirements”
section.
Keep the area around your appliance free from combustible materials
such as lint, paper, rags or chemicals.
Do not add gasoline, dry-cleaning solvents, or other ammable or
explosive substances to the wash water. These substances give o
vapors that could ignite or explode.
Do not reach into the appliance if the wash basket, tub or agitator is
moving.
Do not tamper with the controls.
Do not stand on top of the washer.
If the power plug or power cord are damaged, contact your nearest
service center. Do not use a damaged power plug.
To reduce the risk of electric shock, disconnect this appliance from
the power supply before attempting any maintenance or cleaning.
NOTE: Turning o power with the Power button does NOT
disconnect the appliance from the power supply.
3
ENGLISH
IMPORTANT SAFETY
INSTRUCTIONS
Do not attempt to service, repair or replace any part of the appliance
unless recommended in this user manual or in publishedspecically
user-repair instructions that you understand and have the skills to
carry out.
Before the washer is removed from service or discarded, remove the
washer door or lid.
Do not operate your appliance when parts are missing or broken.
Do not operate this appliance unless all enclosure panels are properly
in place.
READ AND SAVE THESE
INSTRUCTIONS
State of California Proposition 65 Warnings:
WARNING: This product contains one or more chemicals known to the
State of California to cause cancer.
WARNING: This product contains one or more chemicals known to the
State of California to cause birth defects or other reproductive harm.
WARNING
Suffocation Hazard
Before you throw away your old appliance, remove the door or lid so
that children cannot hide or get trapped inside your old appliance.
Failure to follow these instructions can result in death or brain damage.
4
ENGLISH
PARTS AND FEATURES
m nl
a
b
c
d
e
fg
h
i
j
k
r
o
p
q
ATop Lid
BControl Panel
CCabinet
DCabinet Handle (2)
ELeveling Legs (2)
FDrain Port
GPower Cord (120 Volt / 60 Hz)
HAccess Panel
ICold Water Inlet Valve
JHot Water Inlet Valve
KWash Basket
LPowdered Detergent Dispenser
MPower Jet (2)
NOuter Tub Cover
OBalance Ring
PLint Filter (2)
QLiquid Bleach Dispenser
RPulsator
5
ENGLISH
HIGH-EFFICIENCY
This washer uses a pulsator wash system to gently clean clothes using less water
and energy than a traditional agitator washer.
Less water produces a concentrated water and detergent solution that
aggressively works to loosen soils.
Use only detergent. An “HE” logo or the words High-Eciency “High-Eciency”
on the detergent label indicate that the detergent is the correct type to use in
this washer.
NOTE: Regular detergents will create excessive suds that can damage
washer components, reduce rinse performance, and lead to soap build-lm
up that creates mold and mildew. Follow the detergent manufacturer’s
instructions for the amount of HE detergent to use.
INSTALLATION REQUIREMENTS
TOOLS AND PARTS
Gather the required tools and parts before starting installation.
TOOLS NEEDED
Pliers
Large Adjustable Wrench
Flat-blade Screwdriver
Phillips Screwdriver
Tape Measure
Carpenter's Level
PARTS SUPPLIED
Drain Hose Clamp
Drain Hose Hook
Drain Hose
Water Hoses (2)
(at washers
pre-installed)
Cable Ties (2)
Bottom Cover
(with screw)
Caster Kit Faucet Adapter
6
ENGLISH
a
a
AWater Line
WALL
Fasten the drain hose to the water hose as shown.
FLOOR STANDPIPE
For the drain hose, the height of the standpipe drain should be between 39" and 60"
(99 cm and 153 cm) from the bottom of the washer.
The standpipe drain requires a minimum diameter standpipe of 2" (5 cm). The
minimum carry-away capacity can be no less than 17 gal. (64 L) per minute.
Fasten the drain hose to the standpipe tightly, as shown.
39" – 60"
(99 cm – 153 cm)
8
ENGLISH
LAUNDRY TUB
The laundry tub must have a minimum capacity of 20 gal. (76 L). For the drain hose,
the height of the sink rim should be between 39" and 48" (99 cm and 122 cm) from
the bottom of the washer.
Fasten the drain hose to the laundry tub leg tightly, as shown.
39" – 48"
(99 cm – 122 cm)
ELECTRICAL REQUIREMENTS
WARNING
Electrical Shock Hazard
The washer must be connected to a properly grounded 120 volt, 60 Hz.,
AC only, 15- or 20-amp, fused electrical supply. A time-delay fuse or
circuit breaker is recommended.
Failure to do so could result in death, fire or electric shock.
If you are in doubt the electric supply provided meets the above requirements,
contact a licensed electrician.
9
ENGLISH
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove the ground prong from the power cord plug.
Do not use an adapter.
Do not use an extension cord.
Failure to do so can result in death, fire or electrical shock.
A 120 volt, 60 Hz., AC only, 15- or 20-amp, fused electrical supply is required. A
time-delay fuse or circuit breaker is recommended. It is recommended that a
separate circuit breaker serving only this appliance be provided.
This washer is equipped with a power supply cord having a 3 prong grounding
plug.
The power cord must be plugged into a mating, 3 prong outlet, grounded in
accordance with local codes and ordinances. If a mating outlet is not available,
contact a licensed electrician to have one installed.
If codes permit and a separate ground wire is used, it is recommended that a
qualied electrician determine that the ground path is adequate.
Do not ground to a gas pipe.
Check with a qualied electrician if you are not sure the washer is properly
grounded.
Do not have a fuse in the neutral or ground circuit.
10
ENGLISH
WARNING
Excessive Weight Hazard
Use two or more people to move and install washer.
Failure to do so can result in back or other injury.
1. Remove all packing materials. This includes the foam base, molded plastic
support and all adhesive tape holding the washer accessories inside and
outside.
IMPORTANT: Failure to remove the packing base will cause the washer to
not operate properly and will void your warranty.
Open the lid to access the wash basket brace. Pull up on the basket brace to
remove.
NOTE: Save the wash basket brace to use when moving the washer in
the future.
AWash Basket Brace
Using two or more people, lift the washer of the packing base and theo
molded plastic support.
NOTE: It is possible for the plastic support, under the U bracket, to
remain attached to the bottom of the washer. Make sure it is removed
with the foam base.
b
a
APlastic Support
BFoam Base
2. Inspect the washer, and remove any remnants of packaging, tape or printed
materials before using the washer.
12
ENGLISH
3. Properly dispose of /recycle all packing material.
STEP 2 - INSTALL BOTTOM COVER
WARNING
Electrical Shock Hazard
Install bottom cover.
Lock all four casters prior to operating washer.
Failure to do so can result in death, electric shock or personal injury.
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.
1. Lay folded blankets or towels on the to create an incline.oor
WARNING
Excessive Weight Hazard
Use two or more people to move and install washer.
Failure to do so can result in back or other injury.
2. Using two or more people, lay the washer onto its side so that the top of the
washer is higher than the base, and the drain outlet is facing upward.
13
ENGLISH
a b
ADrain Outlet
BTop of Washer
3. With the side of the bottom cover that is marked FRONT/UP toward the interior
and front of the washer, align the edges of the cover with the track in the
bottom of the washer.
4. From the front of the washer, slide the bottom cover fully into the track making
sure the edges of the cover are behind the tabs.
NOTE: When the cover is completely inserted into the track behind the
tabs, the hole for the screw will be ush and aligned with the hole in the
cabinet bottom.
a
c
bc
ABottom Cover
BScrew Hole
CTabs
5. Using the screw (provided), fasten the bottom cover to the cabinet base.
6. If installing casters, continue with STEP 3 - INSTALL CASTERS (OPTIONAL). If
not installing casters, using two or more people, stand the washer upright.
STEP 3 - INSTALL CASTERS
(Optional)
NOTE: If you later decide to install casters, you must rst lay the washer on its
side. See “STEP 2 - INSTALL BOTTOM COVER” for instructions on how to
correctly lay the washer on its side.
1. Using a blade screwdriver, pry the rubber pads from the bottom of all fourat
washer legs.
14
ENGLISH


Specyfikacje produktu

Marka: Haier
Kategoria: pralka
Model: HLPW028BXW

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Haier HLPW028BXW, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje pralka Haier

Instrukcje pralka

Najnowsze instrukcje dla pralka