Instrukcja obsługi Hager JK22503M


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Hager JK22503M (2 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 12 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/2
3&4 Pole 125/250A MCCB Incomer Kit
Instruction leaflet for fitting 3 & 4 Pole125/250A
MCCB Incomer kit
JK21254M
JK22504M
JK22504MCS
Pozidrive
PZ2
2.5mm
8mm
Socket
GB
1ZD0 - Issue -1677 7 11 9
ZD00677 Issue 7ZD0677 Issue 7
3 Pole MCCB Installation - JK21253M - JK22503M - JK22503S
Remove the device shrouds on the incoming device.
Ensure the Phase links are installed as shown and line up correctly.
Use the 3 M5 hex head carp nuts to secure the 3 phase links L1/L2/L3 to the
busbar riser's and tourque to 5Nm.
Use the cap head bolts to secure the opposite end of the 3 phase links L1/L2/
L3 to the MCCB - ensure all the connections are tourqued to 13Nm.
Refit the terminal shrouds on the load side of the MCCB once complete.
Fit the Neutral bar support nylon pillar to the galvanised chassis and then fit the
copper N link with the M5 hex head screw and washer provided and tourque to
5Nm.
Fit the incoming cables to the device, ensure the neutral cable is secured to
the neutral copper link securing with the M8 bolt provided and refit the shroud
to cover the phase links.
Finally fit the adapter plate to the front cover using the high torque screws
provided including the 2 blanks as shown.
The device may only be connected and installed by an electrically skilled person. National standards and safety regulations must be
observed.
The device must be checked for external damage prior to installation. If any damage or other defects are detected in this check, the
device must not be installed.
Its use is only permitted within the limits shown and stated in the installation instructions.
Opening or otherwise tampering with the device invalidates the warranty.
JK21253M
JK22503M
JK22503S
4 Pole MCCB Installation - JK21254M - JK22504M - JK22504MCS
Remove the device shrouds on the incoming device.
Ensure the Phase links are installed as shown and line up correctly.
Use the 3 M5 hex head carp nuts to secure the 3 phase links L1/L2/L3 to the
busbar riser's and torque to 5Nm.
Fit the Neutral bar support nylon pillar to the galvanized chassis and then fit the
copper N link with the M5 hex head screw and washer provided to the cross
link and torque to 5Nm.
Use the cap head bolts to secure the opposite end of the 3 phase links L1/L2/
L3 to the MCCB & fit the 2 neutral links provided (doubled up) to the neutral bar
with the M8 Bolt and also secure to the MCCB - ensuring all the connections
are torqued to 13Nm.
Refit the terminal shrouds on the load side of the MCCB once complete.
Fit the incoming cables to the device, ensure the neutral cable is secured to the
neutral copper link securing with the M8 bolt provided and refit the shroud to
cover the phase links.
Finally fit the adapter plate to the front cover using the high torque screws
provided including the 2 blanks as shown.


Specyfikacje produktu

Marka: Hager
Kategoria: nieskategoryzowany
Model: JK22503M

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Hager JK22503M, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje nieskategoryzowany Hager

Hager

Hager VS418PZF Instrukcja

15 Sierpnia 2024
Hager

Hager VS318PZF Instrukcja

15 Sierpnia 2024
Hager

Hager VS218PZF Instrukcja

15 Sierpnia 2024
Hager

Hager TN204S Instrukcja

15 Sierpnia 2024
Hager

Hager TN206S Instrukcja

15 Sierpnia 2024
Hager

Hager EH171A Instrukcja

15 Sierpnia 2024
Hager

Hager EG203 Instrukcja

14 Sierpnia 2024
Hager

Hager EG403E Instrukcja

14 Sierpnia 2024
Hager

Hager M-RG404020 Instrukcja

14 Sierpnia 2024
Hager

Hager 80262160 Instrukcja

14 Sierpnia 2024

Instrukcje nieskategoryzowany

Najnowsze instrukcje dla nieskategoryzowany

Asko

Asko DBI644MIB.S.TW/1 Instrukcja

28 Października 2024
Asko

Asko DFS233IB.S.TW/1 Instrukcja

28 Października 2024
Emko

Emko EZM-9920 Instrukcja

27 Października 2024
Emko

Emko ESM-3712-H Instrukcja

27 Października 2024
Emko

Emko ATS-10 Instrukcja

27 Października 2024
Emko

Emko EAOM-11.2 Instrukcja

27 Października 2024
Emko

Emko EPM-3790 Instrukcja

27 Października 2024
Emko

Emko EPM-7790 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux IAN 108340 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux HG06009A-BS Instrukcja

27 Października 2024