Instrukcja obsługi Hager 85221101

Hager nieskategoryzowany 85221101

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Hager 85221101 (6 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/6
1/6
07/2012
Blind insert comfort
Order no.: 8522 11 00
Operating instructions
1. Safety instructions
Electrical equipment must only be installed and assembled by a qualied electrician in
accordance with the relevant installation standards, directives, determinations and safety
and accident prevention directives of the country.
Failure to comply with these instructions may result in damage to the device, re or other
hazards.
Hazard due to electric shock. Disconnect before working on the device. Take into
account all circuit breakers that feed dangerous voltages to the device.
Hazard due to electric shock. The device is not suited for safe disconnection of the
mains supply.
Hazard due to electric shock. Do not operate device without the application module.
If several drives should be connected in parallel to one output, it is mandatory to observe
the manufacturer's data; use a cut-off relay where required. Drives can be destroyed.
Use blind drives with mechanical or electrical nal position switches only. Check nal
position switches for correct adjustment. Observe manufacturer's data. The device can
be damaged.
Hazard of injury. Use the device to control blind, shutter or awning drives only. Do not
switch any other loads.
Observe the motor manufacturer's data regarding change-over time and max.
switch-on time (ED).
Do not lay control lines in parallel to the motor lines (danger of coupling).
These instructions are an integral component of the product, and must be retained by the
end user.
2. Design of the device
(2) (1)
(3)
(5)
(4)
(6)
Figure 1: Shutter insert
(1) Shutter insert
(2) Frame
(3) Application module e.g. from a push-button for blinds
2/6
07/2012
(4) Screw for dismantling protection (not R.1/R.3)
(5) Blind button design cover
(6) Connecting terminals
3. Function
Correct use
–Switching electrically operated blinds, shutters, awnings and similar hangings.
–Circuiting of extension units push-buttons for blinds, blind inserts, key push-buttons for
blind possible
–Only suitable for use in indoor areas, no drip or spray water.
–Installation in wall box according to DIN 49073.
–Operate with suitable application module (see Chapter 6.2, "Accessories")
Product characteristics
–2 mechanically and electrically mutually locked relay contacts.
4. Operation
These instructions describe the installation of the shutter insert. The operation and function of
the application modules are described in the instructions of the respective cover.
�
The function of the extension unit is only possible when there is an application module
attached to the master unit.
5. Information for electricians
5.1 Assembly and electrical circuiting
DANGER!
Touching live parts can result in an electric shock.
An electric shock can be lethal.
Disconnect the connecting cables before working on the device and cover all live
parts in the area!
Circuiting and mounting of shutter insert
L
N
Figure 2: Shutter insert circuiting diagram
A MCB max. 10 A is installed as device protection.
Circuit shutter insert according to circuiting diagram (Figure 2)
Install shutter insert in wall box (recommended: deep box). The connection terminals must
be at the bottom.
Attach the frame and application module (see instructions for application module).
3/6
07/2012
Individual control with push-button for shutter extension unit
Individual control with push-button for blind extension unit according to circuiting diagram
503520
L
N
Individual control with key push-button for shutter extension unit
Connect individual control with key push-button for shutter extension unit according to cir-
cuiting diagram
L
N

Specyfikacje produktu

Marka: Hager
Kategoria: nieskategoryzowany
Model: 85221101

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Hager 85221101, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje nieskategoryzowany Hager

Hager

Hager VS418PZF Instrukcja

15 Sierpnia 2024
Hager

Hager VS318PZF Instrukcja

15 Sierpnia 2024
Hager

Hager VS218PZF Instrukcja

15 Sierpnia 2024
Hager

Hager TN204S Instrukcja

15 Sierpnia 2024
Hager

Hager TN206S Instrukcja

15 Sierpnia 2024
Hager

Hager EH171A Instrukcja

15 Sierpnia 2024
Hager

Hager EG203 Instrukcja

14 Sierpnia 2024
Hager

Hager EG403E Instrukcja

14 Sierpnia 2024
Hager

Hager M-RG404020 Instrukcja

14 Sierpnia 2024
Hager

Hager 80262160 Instrukcja

14 Sierpnia 2024

Instrukcje nieskategoryzowany

Najnowsze instrukcje dla nieskategoryzowany

Asko

Asko DBI644MIB.S.TW/1 Instrukcja

28 Października 2024
Asko

Asko DFS233IB.S.TW/1 Instrukcja

28 Października 2024
Emko

Emko EZM-9920 Instrukcja

27 Października 2024
Emko

Emko ESM-3712-H Instrukcja

27 Października 2024
Emko

Emko ATS-10 Instrukcja

27 Października 2024
Emko

Emko EAOM-11.2 Instrukcja

27 Października 2024
Emko

Emko EPM-3790 Instrukcja

27 Października 2024
Emko

Emko EPM-7790 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux IAN 108340 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux HG06009A-BS Instrukcja

27 Października 2024