Instrukcja obsługi Gree XE71

Gree klimatyzacja XE71

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Gree XE71 (21 stron) w kategorii klimatyzacja. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/21
Change for life
Wired Remote Controller XE71
Owner's Manual
Original Instructions
Thank you productfor choosing our .
Please read this Owner’s Manual carefully before operation and retain it for reference. future
If you have lost the Owne 's ual visitr Man www.greecomfort.com/resources/dealer-resources-
current-product/
(XE71-44/G)
User Notice
◆Never install the wired remote controller in or expose directhighly humid environments to
sunlight.
◆
◆
◆
◆
Please read the manual carefully before this product.installing and using
◆
Never drop, shake toss or or, frequently disassemble the wired remote controller the wireless
remote controller.
Never operate the wired remote controller and the wireless remote controller with wet hands.
Do not remove or install the wired controller by yourself. If , please contactyou have questions
your local licensed HVAC technician.
Th wired controller is several kinds of units.is compatible with
Some functions of the wired controller are not available for certain units, more details please IRU
refer to the owner’s manual of unit. unavailable function will not Selecting an do nothing and will
affect unit’s operation.
The wired controller is universal. The remote receiver is either in the indoor unit or in the wired
controller. Please refer to the specific models.
◆When some indoor units are connected to the wired controller and the remote controller is set in
the auto mode (where the temperature adjusts automatically), the remote controller will override
the wired controllers auto mode setting.
Contents
Wired Remote Controller XE71 (XE71-44/G )........................................................ ... 1
1 Symbols on LCD ...........................................................................................1
1.1 Outside View of the Wired Remote Controller ...................................................... 1
1.2 LCD of the Wired Remote ControlleDisplay
r ...... ............................................
...... 1
2 2Touch Pad .....................................................................................................
2.1 Buttons on the Wired Remote Controller .............................................................. 2
2.2 Function of the Buttons .........................................................................................3
3 Operation Instructions ...................................................................................4
3.1 On/Off ................................................................................................................... 4
3.2 Mode Setting .........................................................................................................4
3.3 Temperature Setting ..............................................................................................4
3.4 Fan Setting ............................................................................................................5
3.5 Timer Setting .........................................................................................................5
3.6 Swing Setting ........................................................................................................7
3.7 Sleep Setting .........................................................................................................8
3.8 Turbo Setting .........................................................................................................9
3.9 E-heater Setting ..................................................................................................10
3.10 Blow Setting ......................................................................................................11
3.11 Other Functions ............................ ................................................................... 12..
4 Installation and Dismantlement .................................................................. 13
4.1 Connection of the Signal Line of th ired Remote Controller .......................... 13e W
4.2 Installation of the Wired Remote Controller ........................................................ 13
4.3 Dismantlement of the Wired Remote Controller .................................................16
5 Errors Display .............................................................................................. 16
Wired Remote Controller XE71(XE71 )-44/G
1
Wired Remote Controller XE71(XE71-44/G)
1 Symbols on LCD
1.1 Outside View of the Wired Remote Controller
Enter/Cancel Fan Mode
Function Timer On/Off
SHIELD
MEMORY
MASTER
SAVE
BLOW
QUIET
CO
2
AUTO TURBO
SET
HOUR
F
E-HEATER
A
U
T
O
Fig.1 Outside View of the Wired Remote Controller
1.2 LCD of the Wired Remote Controller Display
SHIELD
MEMORY
MASTER
SAVE
BLOW
QUIET
CO
2
AUTOT URBO SET
HOUR
F
E-HEATER
A
U
T
O
1 2 3
4
5
6
7 8 9 10 1211 13 14 15 16 17 18 19
Fig.2 LCD of the Wired Remote ControllerDisplay
Wired Remote Controller XE71(XE71-44/G)
2
Table 1
No. Symbols Description
1 Swing function.
2 Sleep function (Only sleep 1).
3 Running modes of the indoor unit (Cooling, Dry, Fan and Heating).
4 Defrosting function for the outdoor unit.
5 Gate-control function.
6 Lock function.
7 High, middle, low or auto fan speed of the indoor unit.
8Shield functions (buttons, temperature, On/Off or Mode is shielded
by the remote monitor.
9 Turbo function.
10 Memory function (The indoor unit resumes the original setting state
after power failure and then power recovery).
11 Master red rem e nt ler wi ot co rol (this function is yet unav ble for aila
this unit).
12 It blinks under on state of the unit without operation of any button.
13 Energy-saving function (this function is yet unavailable for this unit).
14 Ambient/preset temperature value.
15 Electric auxiliary heating function. Not available in U.S.
16 Blow function.
17 Timing value.
18 Quiet function (two types: quiet and auto quiet)
(this function is yet unavailable for this unit).
19 SET It will be displayed under the debugging mode.
2 Touch Pad
2.1 Buttons on the Wired Remote Controller
Enter/Cancel Fan Mode
Function Timer On/Off
1 2 3 4
5 6 7 8
Fig. 3 Buttons on the Wired Remote Controller
Wired Remote Controller XE71(XE71-44/G)
3
2.2 Function of the ButtonsTouch Pad
Table 2
No. Name Function
1 Enter/Cancel Function selection and cancellation.
2▲①Running temperature setting of the indoor unit, range:61~86°F(16~30 )℃ .
② Timer setting, range:0.5-24 hr.
6▼
3 Fan Setting of s the high/middle/low/auto fan speed .
4 Mode Setting the Cooling/Heating/Fan/Dry/Auto mode of the indoor unit.
5 Function Switchover functionto the Turbo/Save/E-heater/Blow etc. s.
7 Timer Timer setting.
8 On/Off Turn indoor unit on/off.
4+2 ▲+Mode
Press for 5 s uni Ent r/ ce the Memory fu ecs when t to is off e Can l n ion (ct If
memor is se indoor uniy t, t thwill re turn t o e last setting upon power
failure ". th t is fa te to If t, no e indoor uni de ul d "off af ve y. ter power reco r
" the Memory off"is de ulfa t ).setting at time of delivery
3
+6 Fan+▼ By ss off bepre ing these at the same time when unit is will displayed
on the wi d remote ntroller re co .
2
+6 ▲+▼
Upon star p the uni ortu of t, if there are no problems if the unit is off,
pre e same me r en r e loss both at th ti fo 5s to te th ck mode where no
buttons will cancel won’t spre ond when pressed. ss Repre both fo to r 5s
this operation.
4+6 Mode+▼ While "OFF" the Celsiu and hrenhei sc s Fa t ales can be swi hed tc by
5+7 Function+Timer
①I t t t is s s by t t t t endoor ambien empera ure en ed he re urn air empera ur
sensor ( 01 displayed on the timer area).
②I t t t is s s by t c t 2ndoor ambien empera ure en ed he wired on roller (0
displayed on the timer area).
③The return air temperature sensor is sele ed under the cooling, dry, orct
f w le t wired contro er t t is se t deran mode; hi he ll empera ure sensor lec ed un
the heating or auto mode. (03 is displayed on the timer area).
④The wired ontroller temperature sensor is selected under the cooling c ,
dry, or fan mode; while the return air temperature sensor is selected under
the heating mode. (04 is displayed on the timer display area).
5+7 Function+Timer
While possible " OFF", it is to go e c to th ommi ioningss status by
pre ing n ion” and mer” r seconds e “Mode” bu on ss “Fu ct “Ti fo five . Pr ss tt
until “01” icon is shown the temperature display area. Pres “ ” “ ” in s ▲and ▼
t optionso select the following available : Three low levels (01) ; Three ① ②
high levels (02).
While "OFF", it's possible to go into the commissioning status by pressing
“Function” and “Timer for five seconds and leaving “00” in the temperature
display area. Then, pressing “Mode”, adjust the options in the timer area
by pressing “▲” and “▼”to select the following options:
Wired Remote Controller XE71(XE71-44/G)
4
3 Operation Instructions
3.1 On/Off
Press On/Off to turn on the unit turn it off, press again to .
Note: The state sh wn in Fig.4 dicates “Off” after wer on. The state shown in Fig.5 o in unit is po ing
indicates the “On” . unit is after powering on
Fig. 4 “Off” State Fig. 5 “On” State
3.2 Mode Setting
While in the " “On” state press "Mo ed to switch the operati n modes the fo ing o in llow
sequence:Auto-Cooling-Dry-Fan-Heating.
Auto Cooling Dry Fan Heating
3.3 emperature SettingT
Press ▲or ▼ to increase/decrease the preset temperature. If ither continuously, e is pressed
the temperature will be increased or decreased by 1°F(1 ) every 0.5s s shown in Fig.6.℃ ，a
In the Cooling, Dry, Fan or Heating mode, the temperature setting range is 61°F~86°F(16℃
~30 )℃ . In the Auto mode, the setting temperature is adjustable.not
F F
5
Fig.6
3.4 Fan Setting
In th “On”/”Off” state of th Fa fa d of th or t l e e unit, press n and the n spee e indo uni wil
change shown in Fig.7.in the order
Low Middle High
Enter/Cancel Fan Mode
Function
Timer On/Off
AUTO
Fig.7
3.5 Timer Setting
In the “On”/”Off” state of the unit, press Timer to set timer off/on.
Timer "On" setting: P "ress Timer", and the LCD will display “xx.x hour”, with “hour” blinking.
Then press ▲or ▼to adjust the time. Then prexx Enter/Cancel to confirm.
Timer ff set : "O " ting Pres Timer , if n’t sp y r th it me s th timer s " " LCD wo di la xx.x hou en an e
setting is canceled.
Timer "O " ff setting under the “On” state of the unit is shown as Fig.8.
Wired Remote Controller XE71(XE71-44/G)
F
F
6
Fig. 8 Timer off Setting under the “On” State of the Unit
Timer range: 0.5-24hr. Every press of will make the set time increased or decreased by ▲or ▼
0.5hr. If either of them is pressed continuously, the set time will increase/ decrease by 0.5hr every
0.5s.
Wired Remote Controller XE71(XE71-44/G)
FFF
FF
7
3.6 Swing Setting
Swing On: Press Function under on state of the unit to activate the swing function. In this case,
Swing Off: When the Swing function is on, press Function to enter the Swing setting interface,
with blinking. After that, press Enter/Cancel to cancel this function.
Swing setting is shown as Fig.9.
Fig. 9 Swing Setting
Note:
①.
Sleep, Turbo or Blow setting is the same as the Swing setting.
②.
After the setting has been done, it has to press the key “Enter/Cancel” to back to the setting
Wired Remote Controller XE71(XE71-44/G)
F F
FF
F
Wired Remote Controller XE71(XE71-44/G)
8
3.7 Sleep Setting
S ep on: Press Funct n under on state of the unit till the it enters the S ep setting le io un le
S ep off: W n the S ep f ct n is activated, ss Function to enter the S ep setting le he le un io pre le
interface. After that, press Enter/Cancel to can this function.
In the Cooling or Dry mode, the temperature will increase by 1℃ after the unit runs under Sleep
1 for 1hr and 1℃ after another 1hr.After that, the unit will run at this temperature.
In the Heating mode, the temperature will decrease by 1 a ℃fter the uni runs under leept S 1 for
1hr and 1℃ after another 1hr. After that, the unit will run at this temperature.
Sleep setting is shown as Fig.10.
Fig. 10 Sleep Setting
FF
F
FF
9
3.8 Turbo Setting
Turbo function: The unit at the high fan speed can realize quick cooling or heating so that the
room temperature can quickly approach the setting value.
In the Cooling or Heating mode, pre Function till the unit enters the Turbo se ing interface ss tt
When the Turbo fun ion is a ivated, press Function to enter the Turbo se ing interface and ct ct tt
then press Enter/Cancel to cancel this function.
Turbo function setting is as shown in Fig.11.
Fig.11 Turbo Setting
Wired Remote Controller XE71(XE71-44/G)
FF F
FF
10
3.9 E-heater Setting
E ater ux ry ectric ating funct ): In the ating e, E ater is ed to be-he (a ilia el he ion He mod -he allow
Once the ed ote cont er or the ote cont er enters the at g e, this function wir rem roll rem roll He in mod
will be turned on automatically.
Pre F ction in the at g e to enter the E eater sett g interface d t n ss ss un He in mod -h in an he pre
Enter/Cancel to cancel this function.
Press Function to enter the E-heater setting interface, if the E-heater function is not activated,
and then press Enter/Cancel to turn it on.
The setting of this function is shown as Fig.12 below:
Fig.12 E-heater Setting
Wired Remote Controller XE71(XE71-44/G)
FF F
F F
11
3.10 Blow Setting
B w f ct : A er t t tur of t ter rator of or t l be lo un ion ft he uni is ned f, he wa in evapo indo uni wil
automatically evaporated to avoid mildew.
In t g y , F ct t l t it t s t B w se g t face d he Coolin or Dr mode press un ion il he un en er he lo ttin in er an
then press Enter/Cancel to active this function.
W t B f ct is activat , F ct n to t B se g t face t n hen he low un ion ed press un io he low ttin in er and he
press Enter/Cancel to cancel this function.
Blow function setting is as shown in Fig.13
Fig.13 Blow Setting
Notes:
①.
W t B w f ct tivat , if tur g off t t by press On ff or by thehen he lo un ion is ac ed nin he uni ing /O
remote controller, the indoor fan will run at the low fan speed for 2 min, with “BLOW” displayed on
the LCD. While, if the Blow function is deactivated, the indoor fan will be turned off directly.
②.
Blow function is unavailable in the Fan or Heating mode.
Wired Remote Controller XE71(XE71-44/G)
FF F
FF
Note:
12
3.11 Other Functions
(1). Lock
Upon startup of the unit without malfunction or under the “Off” state of the unit, press and ▲
▼
at the same time for 5s till the wired remote controller enters the Lock function. In this case, LCD
displays .
After that, repress these two buttons at the same time for 5s to quit this function.
Under the Lock state, any other button press won’t get any response.
(2). Memory
Memory switchover: Under the “Off” state of the unit, press Mode and at the same time for ▲
5s to switch memory states between memory on and memory off. When this function is activated,
Memory will be displayed. If this function is not set, the unit will be under the “Off” state after power
failure and then power recovery.
Memory recovery: If this function has been set for the wired remote controller, the wired
remo on rolle powe ailur wil re um origina runnin upo powete c t r a er ft r f e l s e its l g state n r recovery.
Memory contents: On/Off, Mode, set temperature, set fan speed and Lock function.
(3). Selection of the Temperature Sensor
Und uni pr bo io an onder F state of the OF t, ess th “Funct n” d “Timer” for five sec s to go the
commissioning status. Under this status, adjust the display in the temperature display area to “00”
through the button “Mode”, and then adjust the option of the temperature sensor in the timer display
area through the button ▲ or ▼.
①.Indoor ambient temperature is sensed at the return air inlet(01 in the timer display area).
②.Indoor ambient temperature is the sensed at the wired controller(02 in the timer display area).
③.Select the temperature sensor at the return air inlet under the cooling, dry and fan modes,
whil el emper ur wire rolle unde he in ane s ect the t at e sensor at the d cont r r the at g d auto
modes.(03 in the timer display area).
④.Select the temperature sensor at the wired controller under the cooling, dry and fan modes,
and select the temperature sensor at the return air inlet under the heating mode and auto
modes (04 displayed in the timer display area).
After connected with indoor unit, if the type of ambient temperature sensor has not been manually
set, the wired controller will select the ambient temperature sensor according to the model of connected
IDU; if it connects to cassette type IDU, duct type IDU, floor ceiling type IDU, ceiling type IDU, it will
adopt , otherwise it will adopt . If the type of ambient temperature sensor is set manually, the wired ③ ①
controller will subject to the manual setting, and will not set according to automatic IDU model selection.
Pressing the button “On/Off” also can quit this commissioning status but the set data won’t be
memorized.
Under the commissioning status, if there is no any operation in 20 seconds after the last button
press, it will back to the previous state without memorizing the current data.
Wired Remote Controller XE71(XE71-44/G)
13
(4). Selection of the Fan Speed
go to the commissioning status, and then adjust the display in the temperature display area to 01
through the button “Mode” and adjust the setting of the fan speed, which comes to two options.
01: Three low fan speeds; 02: Three high fan speeds
Pressing the button “On/Off” also can quit this commissioning status but the set data won’t be memorized.
Under the commissioning status, if there is no any operation in 20 seconds after the last button
press, it will back to the previous state without memorizing the current data.
4 Installation and Dismantlement
4.1 Connection of the Signal Line of the Wired Remote Controller
●Open the cover of the electric control box of the indoor unit.
●Let the single line of the wired remote controller through the rubber ring.
●Connect the signal line of the wired remote controller to the 4-pin socket of the indoor unit .
●Tighten the signal wire with ties.
●The communication distance between the main board and the wired remote controller can
be up to 20 meters ( the standard distance is 8 meters)
4.2 Installation of the Wired Remote Controller
1
PVC Pipe
3 4 52
Fig.14 Accessories for the Installation of the Wired Remote Controller
Table 3
No. 1 2 3 4 5
Name
Socket box
embedded
in the wall
Soleplate of the
Wired Remote
Controller Screw M4X25
Front n of the Pa el
Wired Remote
Controller
Screw ST2.9X6
Sponge 20×20×2
Wired Remote Controller XE71(XE71-44/G)
14
1
6
8 9 10
7
3 4
5
2
Fig.15
Fig.15 shows the installation steps of the wired remote controller, but there are some issues that need your attention.
(1). Prior to the installation, please firstly cut off the power supply of the wire buried in the
installation hole, that is, no operation is allowed with electricity during the whole installation.
(2). Pull out the four-core twisted pair line from the installation holes and then let it go through
the rectangular hole behind the soleplate of the wired remote controller.
(3). Stick the soleplate of wired controller on the wall and then use screw M4×25 to fix
soleplate and installation hole on wall together, attach the sponge 20×20×2 at the screw hole
and then press it with fingers to make sure it’s attached firmly.
(4). Insert the four-core twi ed pair line into the slot of the wired remote controller and then st
buckle the front panel and the soleplate of the wired remote controller together.
(5).
ST2.9X6.
Note CN1 is 485 c unication interface nd it us ：omm a ed
for c necting th 4-core c unication wire. on e omm
These two dle stands(CN2 3) are used for nee 、CN
c cting the smar one cont ler There no onne t z rol . is
s uence for these two dle stands. ou can eq nee Y
c one or two dle st (s) ing on the onnect nee and bas
ment.require
Wired Remote Controller XE71(XE71-44/G)
15
Fig.16
Fig.16
shows the schematic diagram of control system connection. XE71(XE71-44/G) can connect the smart
zone controller (integrated control system). “n” indicates the number of communication node address
(programmable wired controller ). The complete system is composed of the smart zone controller, XE71
wired controller and communication cable. The wired controller XE71can support 16 XE71 communication
node addresses at the most (n≤16).
Terminal A and terminal B of the smart zone controller are respectively connected to the corresponding
communication needle stand terminal of the #1wired controller by the communication cable; the other
needle stand of #1 wired controller is connected to the #2 wired controller through the telecommunication
cable and so forth until connect to the #n wired controller. Except the last wired controller in the control
system (only use CN2 or CN3, and the other one will not be connected), there’s no the sequence and the
importance for the wired controller. The series number in the figure is only for the sake of clarity.
Fig.17
Fig.17
shows schematic diagram of DIP switch. There is a 2-bit DIP switch on the main board of wired
controller . As for the last #n wired controller in the control system, the 1-bit and the 2-bit of the XE71(XE71-44/G)
DIP switch should be manually pulled to position “on” and position “off” respectively. The DIP switches of
other wired controllers should be kept at the initial ex-factory status (1-bit and 2-bit are set at position
“off”).
CAUTION!
Please special following during avoid pay attention to the the installation to any problems with
the air conditioning unit due to electromagnetic interference.
①.
Separate the signal and communication lines of the wired remote controller from the power
Smar zonet
controller
Wired Remote Controller XE71(XE71-44/G)

Specyfikacje produktu

Marka: Gree
Kategoria: klimatyzacja
Model: XE71

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Gree XE71, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje klimatyzacja Gree

Gree

Gree GMV-N48AC/VA-T Instrukcja

11 Lutego 2025
Gree

Gree GMV-N60AC/VA-T Instrukcja

11 Lutego 2025
Gree

Gree FSU36HP230V1R32AH Instrukcja

30 Stycznia 2025
Gree

Gree CROWN18HP230V1BO Instrukcja

30 Stycznia 2025
Gree

Gree CROWN09HP230V1BO Instrukcja

30 Stycznia 2025
Gree

Gree CON12HP230V1R32AH Instrukcja

30 Stycznia 2025
Gree

Gree CROWN12HP230V1BH Instrukcja

30 Stycznia 2025
Gree

Gree FLR12HP230V1R32AH Instrukcja

30 Stycznia 2025
Gree

Gree CROWN09HP230V1BH Instrukcja

30 Stycznia 2025
Gree

Gree CE52-24/F(C) Instrukcja

15 Stycznia 2025

Instrukcje klimatyzacja

Najnowsze instrukcje dla klimatyzacja

Hyundai

Hyundai WSHN50DUAL9 Instrukcja

25 Marca 2025
VOX

VOX PMF09CH Instrukcja

18 Marca 2025
VOX

VOX PQF12CH Instrukcja

18 Marca 2025
VOX

VOX PQA12C Instrukcja

18 Marca 2025
VOX

VOX PMJ09C Instrukcja

18 Marca 2025
Toshiba

Toshiba RAC-WK1011ESCWU Instrukcja

18 Marca 2025
Toshiba

Toshiba RAC-WK0812ESCWRU1 Instrukcja

18 Marca 2025
Midea

Midea AG16Black-24NXD0-I Instrukcja

12 Marca 2025
Midea

Midea MSX-12NXD0 Instrukcja

12 Marca 2025
Midea

Midea AEP2-12NXD6-I Instrukcja

12 Marca 2025