Instrukcja obsługi Graupner GR-32L DUAL HoTT - S1023
Graupner
Sterowanie radiowe
GR-32L DUAL HoTT - S1023
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Graupner GR-32L DUAL HoTT - S1023 (15 stron) w kategorii Sterowanie radiowe. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/15
OPERATING INSTRUCTION
Prior to use, please read this manual thoroughly.
Keep this manual in a convenient place for quick and easy reference.
No. 33505 No. S1021
No. S1022 No. S1023
No. S1023 GR-32L DUAL HoTT
33505 GR-12S HoTT
No. S1022 GR-24L HoTT
No. S1021 GR-16L HoTT
Contents
2
• Before Use
• Support and Service
- Customer support
- Internet sales site
- A/S regulation
- Warranty regulation
• Openhobby A/S Center
1. Introduction
2. Flying Safety
3. Features
- Specication
4. Operation
1) Binding
2) Range check
3) Fail-safe function
4) Range warning
5. Receiver
1) Servo connection
2) Power supply to the receiver
3) The programming socket
6. The Programming Setup With Telemtry Box
7. Firmware Update
8. Safety Approval
9. Accessories
3P
3P
3P
3P
3P
3P
3P
4P
4P
4P
5P
5P
5~6P
6~7P
7P
7P
8P
9P
9P
9P
10P
10P
11~13P
14~15P
4
1. INTRODUCTION
3. FEATURES
2. FLYING SAFETY
Read the ENTIRE instruction manual to become familiar with the features of the
product before operating. Failure to operate the product correctly can result in
damage to the product, personal property and cause serious injury.
WARNING
Graupner HoTT receivers are compatible with all of Graupner transmitters and used to
airplane, helicopter and glider. HoTT system gives user real-time information on various
useful data such as user model’s RPM, voltage, temperature, user programmable warn-
ing, and so on which are directly obtained from telemetric speed controllers equipped
with this HoTT system without having to install separate sensor devices. Of course, all of
those telemetric data can be also transmitted from separate sensor devices. The use of
up to 75 hopping channels provides advanced reliable operation while keeping from any
external interference.
All instructions, warranties and other collateral documents are subject to change at the
sole discretion of Graupner. For up-to-date product literature, visit http://www.openhob-
by.com and click on the support tab for this product
1. Do not y your model near spectators, parking areas or any other area that could
result in injury to people or damage of property.
2. Ensure that all channels are working in the proper manner.
3. Perform a ground range check prior to the initial ight of the day
4. Do not y during adverse weather conditions. Poor visibility can cause disorientation
and loss of control of your aircraft. Strong winds can cause similar problems
5. We strongly recommend to set the Failsafe function and also recommend that the
preset Failsafe would be idle position
6. You need to set the function of the transmitter after removing a power battery from a
model or stopping a engine of a model.
7. Ensure that all your batteries have been properly charged prior to ight.
- The use of up to 75 channels ensures extreme operating reliability and immunity to
external interference.
- The broad reception voltage range of 3.6 V - 8.4 V (functional to 2.5 V) ensures full
func tionality even when voltage uctuates.
- Two LEDs signal operating status.
- The optimized sizes and weights
- Receiver input sensitivity and thus the range have been increased further.
- Servo connections in the front panel.
- Failsafe, Hold, OFF, and standard (channel 1 failsafe; all others hold) programmable.
Specyfikacje produktu
| Marka: | Graupner |
| Kategoria: | Sterowanie radiowe |
| Model: | GR-32L DUAL HoTT - S1023 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Graupner GR-32L DUAL HoTT - S1023, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Sterowanie radiowe Graupner
5 Lipca 2024
5 Lipca 2024
5 Lipca 2024
5 Lipca 2024
5 Lipca 2024
5 Lipca 2024
5 Lipca 2024
5 Lipca 2024
5 Lipca 2024
5 Lipca 2024
Instrukcje Sterowanie radiowe
- Sterowanie radiowe Spektrum
- Sterowanie radiowe Reely
- Sterowanie radiowe Futaba
- Sterowanie radiowe Multiplex
- Sterowanie radiowe Robbe Futaba
- Sterowanie radiowe Hitec
- Sterowanie radiowe Robbe
- Sterowanie radiowe JRpropo
- Sterowanie radiowe Sanwa
- Sterowanie radiowe Rush
Najnowsze instrukcje dla Sterowanie radiowe
14 Października 2024
27 Września 2024
27 Września 2024
27 Września 2024
27 Września 2024
27 Września 2024
27 Września 2024
27 Września 2024
26 Września 2024
26 Września 2024