Instrukcja obsługi Gorenje RF4204W

Gorenje lodówka RF4204W

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Gorenje RF4204W (4 stron) w kategorii lodówka. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/4

Instruction for Changing Direction of opening the door6

Changing the Direction of Opening the Door EN

For one - door appliances, 540 mm width

If you find the direction of opening the door on your

appliance inconvenient, you can change it. Holes

on the opposite side have already been prepared

in the factory and are now plugged.

• Remove the cover on the upper hinge,

unscrew the hinge and take off the door of

the appliance (the door is not fixed on the

middle hinge).

• Take off all door corners and interchange

them (instead of the corner with a hole insert

the one without the hole and vice versa).

• Unscrew the lower hinge with foot and the

other foot.

• Fix the lower hinge with foot to the opposite

side and fix the other foot on the place where

previously was the hinge.

• Put the door of the appliance on the lower

hinge.

• Fix the upper hinge and cover it.

• Unscrew the handle and replace it on the

opposite side (not for handles mouinted

horizontally).

Some screws are covered with caps. Take

them off before undoing the screws.

• Plug the remaining holes with decorative

caps.

• Check the gasket, it shouldn't be creased

and it should seal well. In case it does not fit

perfectly, pull it out and rotate for 180°. In

certain models it is not possible to replace

the door gasket. Should the seal not adhere

to the casing of the appliance perfectly, it will

have to be heated from a suitable distance

(by means of hair drier, for example) and

lightly stretched to the required height. In

certain models it is not possible to replace

the door gasket.

Changing the Direction of Opening the Door

on the Low Temperature Compartment

• Unscrew the blocking element and the hinge

of the low temperature compartment and

take off the door.

• Plug the holes with plastic caps provided.

Turn the door for 180° and replace it on the

opposite side of the low temperature

compartment. Fix the hinge and the blocking

element of the door (position of holes

already provided).

1 Cover for the upper hinge

2 Upper hinge

3 Foot

4 Handle

5 Lower hinge with foot

6 Corner without a hole

7 Corner with a hole

8 Low temperature compartment

9 Blocking element

10 Door hinge

Instruction for Changing Direction of opening the door 7

For one - door appliances with worktop,

500 mm width

If you find the direction of opening the door on your

appliance inconvenient, you can change it. Holes

on the opposite side have already been prepared

in the factory and are now plugged.

• Unscrew the lower hinge with foot and

remove the door ot the appliance.

• Unscrew the other foot and fix it on the place

where previously was the hinge with the foot.

• Rotate the fastener having the function of

the upper hinge counter clockwise, take it off

and replace it on the opposite side of the

door.

• Put the door on the fastener having the function of

the upper hinge.

• Put the fastener with foot of the lower hinge

(with a washer) into the plastic corner with a

hole and fix the lower hinge.

• Unscrew the handle and replace it on the

opposite side (not for handles mouinted

horizontally).

Some screws are covered with caps. Take

them off before undoing the screws.

• Plug the remaining holes with decorative

caps.

• Check the gasket, it shouldn't be creased

and it should seal well. In case it does not fit

perfectly, pull it out and rotate for 180°. In

certain models it is not possible to replace

the door gasket. Should the seal not adhere

to the casing of the appliance perfectly, it will

have to be heated from a suitable distance

(by means of hair drier, for example) and

lightly stretched to the required height. In

certain models it is not possible to replace

the door gasket.

Changing the Direction of Opening the Door

on the Low Temperature Compartment

• Unscrew the blocking element and the hinge

of the low temperature compartment and

take off the door.

• Plug the holes with plastic caps provided.

• Turn the door for 180° and replace it on the

opposite side of the low temperature

compartment. Fix the hinge and the blocking

element of the door (position of holes

already provided).

1 Lower hinge with foot

2 Lower hinge washer

3 Foot

4 Fastener

5 Handle

6 Low temperature compartment

7 Blocking element

8 Door hinge

Instruction for Changing Direction of opening the door8

For two - door appliances, 500 mm width

If you find the direction of opening the door on your

appliance inconvenient, you can change it. Holes

on the opposite side have already been prepared

in the factory and are now plugged.

• Remove the cover on the upper hinge,

unscrew the hinge and take off the freezer

door (the door is not fixed on the middle

hinge), don't forget to remove the washer

from the middle hinge.

• Unscrew the lower hinge with foot and

washer and remove the refrigerator door.

• Unscrew the middle hinge and the other foot.

• Fix the lower hinge with foot (and washer) to

the opposite side and fix the other foot on

the place where previously was the hinge.

• Put the refrigerator door on the lower hinge.

• Rotate the middle hinge for 180°, replace it

to the opposite side of the door and fix it.

• Put on the washer first and then the upper

door.

• Fix the upper hinge and cover it.

• Unscrew the handles and replace them to

the opposite side (not for handles mouinted

horizontally). Some screws are covered with

caps. Take them off before undoing the

screws.

• Plug the remaining holes with decorative

caps.

• Check the gasket, it shouldn't be creased

and it should seal well. In case it does not fit

perfectly, pull it out and rotate for 180°. In

certain models it is not possible to replace

the door gasket. Should the seal not adhere

to the casing of the appliance perfectly, it will

have to be heated from a suitable distance

(by means of hair drier, for example) and

lightly stretched to the required height. In

certain models it is not possible to replace

the door gasket.

1 Cover for the upper hinge

2 Upper hinge

3 Middle hinge

4 Middle hinge washer

5 Lower hinge with foot

6 Lower hinge washer

7 Foot

8 Handle

Specyfikacje produktu

Marka:	Gorenje
Kategoria:	lodówka
Model:	RF4204W
Kolor produktu:	Czarny
Wbudowany wyświetlacz:	Nie
Waga produktu:	162 g
Ilość na paczkę:	1 szt.
Liczba przycisków:	53
Waga wraz z opakowaniem:	215 g
Rodzaj baterii:	AAA
Liczba baterii:	2
Ładowanie akumulatora:	Nie
Standardowe rozwiązania komunikacyjne:	Podczerwień
Wymiary opakowania (SxGxW):	129.5 x 274.3 x 38.1 mm
Kompatybilność marki:	Philips
Przyciski oświetlane od tyłu:	Tak
Maksymalny zasięg:	10 m
Wbudowana bateria:	Nie
Sposób wprowadzania danych:	Naciśnij przyciski
Podświetlane przyciski:	Audio,CABLE,DTV,DVD/Blu-ray,DVR,Home cinema system,SAT,TV
Zakres częstotliwości nośnej:	24 - 55 kHz
Funkcja uczenia się kodów IR:	Tak
Nadawcze diody LED:	1
Ilość obsługiwanych urządzeń:	10
Kąt transmisji:	45 °