Instrukcja obsługi GoldenEar Technology SuperSat 50C

GoldenEar Technology głośnik SuperSat 50C

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla GoldenEar Technology SuperSat 50C (16 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/16
Owner’s Manual
Satellite, Center and Surround Loudspeakers
™
SuperSat Series
GoldenEar Technology ►SuperSat Series Manual
SuperSat Series Owner’s Manual
Congratulations!
Congratulations and thank you for purchasing GoldenEar Technology’s ® SuperSat speakers! You are about to hear
the spectacular difference these very special Satellite speakers will make in your music and/or home theater system!
Our engineers’ many years of experience in developing loudspeakers has led to this extraordinary product. In order
to ensure that you experience maximum performance, please take a moment to fully read this owner’s manual and
familiarize yourself with the unique installation, assembly and set-up procedures for your SuperSat speakers.
Please visit our website at www.GoldenEar.com for more information on the technology behind your new speaker
system. If you have additional questions, contact your Authorized GoldenEar Technology ® Dealer or visit the
Q&A page in the Tech Support section of our website.
Your New GoldenEar Speakers
GoldenEar SuperSat speakers are designed to fi t beautifully in a wide variety of applications. Their compact and
narrow dimensions allow for easy installation in many locations within your home. To get the best performance
possible and for a product that lasts a lifetime, we strongly recommend that you follow the placement and setup
guidelines provided in this manual.
Cleaning
Do not use a strong or abrasive cleaner on your new speakers. Clean them only with a damp cloth, but do not
get them wet. Do not set wet objects on top of the speakers as they may damage the enclosure.
Wall and Stand Mounting
Your speakers have keyhole slots and a threaded insert to facilitate mounting on a wall. If you are wall mounting
speakers, take extra care in installation and the use of safety straps as a secondary restraint is recommended.
We suggest wall mounting installation be performed by a qualifi ed contractor or your authorized GoldenEar
dealer.
2
IMPORTANT: GoldenEar does NOT supply the
hardware for mounting speakers to the wall.
GoldenEar Technology ►SuperSat Series Manual
Preventing Speaker Damage
GoldenEar Technology SuperSat speakers are effi cient and can be driven to loud listening levels with moderate
amplifi er power. They are also able to handle the output of very powerful amplifi ers. To prevent damage to your
speakers, please read all of the following guidelines before hooking them up. Please also note, that SuperSat
speakers are designed to be high-passed and used with a subwoofer. Attempting to play them full range (no
high-pass) at high volumes can damage the speaker.
Amplifi er Distortion — #1 Threat to your New Speakers!
Amplifi er distortion is the principal cause of speaker damage. When listening at loud levels your amplifi er may run
out of clean power. It will then begin to produce speaker-damaging distorted power. This will damage any brand
of speaker very quickly! More powerful amplifi ers are actually safer – For example: A 40 Watt/channel amplifi er
will have substantial distortion above 40 Watts. If driven to 50 Watts, this amplifi er will deliver speaker-damaging
distorted power! But a 100 Watt/channel amplifi er will have very low distortion below 100 Watts. Therefore, when
the speaker requires 50 Watts, this more powerful amplifi er will deliver clean power and speaker damage is less
likely to occur. (See your GoldenEar Technology dealer for amplifi er recommendations.)
Volume Setting
Do not be fooled by the Volume setting of your receiver/preamplifi er. It only adjusts listening level — it is not
a “power-output” dial. The amount of amplifi er power actually used at a given Volume setting depends solely
on the nature of the source material you are listening to (at a given Volume setting a quiet section of music will
use less amplifi er power than a loud section). With typical material, the rated output power of many receivers/
amplifi ers is often reached when the Volume is set to around -10dB, or between the “11” and “1 o’clock”
settings with an analog control (with bass/ treble and loudness controls not used — otherwise rated power
may be reached at even lower Volume settings). Remember, all amplifi ers produce distortion when operated
beyond their rated output power. The resulting distortion will damage all speakers! If you listen at loud levels,
be careful to listen for the point of audible distortion — if the speakers begin to sound distressed, turn the Volume
down or your speakers and/or amplifi er(s) will be damaged! This type of damage constitutes abuse and is not
covered by the warranty. If louder volumes are desired, consider a more powerful amplifi er.
There is Actually a Limit!
Even with these safer, more powerful amplifi ers, there is a point at which you could have more power than the
speaker can handle. At that point you will overpower the speaker and damage it. At loud levels do not increase
bass/treble controls from zero and ensure that all loudness/contour/bass EQ buttons are off (otherwise rated
output power will be reached at even lower volume control settings).
3
USE AN APPROPRIATE AMPLIFIER. At high volumes a very powerful amplifi er can overdrive your
speakers and damage them. And if the amplifi er is not powerful enough, it can produce distortion
that can easily damage your speaker. (Consult your dealer for assistance.)
DON’T BE FOOLED BY YOUR RECEIVER’S VOLUME CONTROL. It only adjusts how loud, it is not an
indication of power output. If your speakers begin to sound harsh or grating or if you hear other forms
of distortion, turn down the volume immediately!
PROPER SETUP IS THE KEY. Please Note: Your SuperSat speakers are designed to be used with a
subwoofer and with a high-pass crossover (“SMALL” setting on an A/V receiver). Also, avoid use
of tone controls and loudness controls as they will demand even more power from an amplifi er.

Specyfikacje produktu

Marka: GoldenEar Technology
Kategoria: głośnik
Model: SuperSat 50C

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z GoldenEar Technology SuperSat 50C, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje głośnik GoldenEar Technology

GoldenEar Technology

GoldenEar Technology T66 Instrukcja

29 Września 2024
GoldenEar Technology

GoldenEar Technology SuperSat 60 Instrukcja

17 Września 2024
GoldenEar Technology

GoldenEar Technology SuperCenter X Instrukcja

17 Września 2024
GoldenEar Technology

GoldenEar Technology Invisa 525 Instrukcja

16 Września 2024
GoldenEar Technology

GoldenEar Technology Invisa HTR 8000 Instrukcja

16 Września 2024
GoldenEar Technology

GoldenEar Technology Invisa SPS Instrukcja

15 Września 2024
GoldenEar Technology

GoldenEar Technology Triton Two Instrukcja

15 Września 2024
GoldenEar Technology

GoldenEar Technology Invisa HTR 7000 Instrukcja

15 Września 2024
GoldenEar Technology

GoldenEar Technology SuperSat 3 Instrukcja

15 Września 2024
GoldenEar Technology

GoldenEar Technology BRX Instrukcja

15 Września 2024

Instrukcje głośnik

Najnowsze instrukcje dla głośnik

Teufel

Teufel Rockster Air Instrukcja

15 Października 2024
Alpine

Alpine PSS-22WRA Instrukcja

15 Października 2024
Bauhn

Bauhn APPS-0724 Instrukcja

15 Października 2024
Aiwa

Aiwa SP-A100 Instrukcja

15 Października 2024
Harman Kardon

Harman Kardon Citation One Instrukcja

14 Października 2024
Alpine

Alpine 30MC Instrukcja

14 Października 2024
Magnat

Magnat Needle 9000 ALU Instrukcja

14 Października 2024
Pioneer

Pioneer SP-T22A-LR Instrukcja

14 Października 2024
Sharp

Sharp PS-932 Instrukcja

14 Października 2024
Pyle

Pyle PDWR64BTW Instrukcja

13 Października 2024