Instrukcja obsługi Glide Gear TMP 100


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Glide Gear TMP 100 (4 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/4
TMP 100
For more informaon please visit our website: www.glidegear.net
Requirements
In order to use the TMP 100, you will need the following items, which are not in-
cluded with the TMP 100:
A video recording device such as a DSLR or a Mirrorless camera, a tablet
or a smartphone. The TMP 100 does not come with a phone or a tablet
mount/adapter.
A device, typically, a tablet or a cellphone, displaying the script to be read
in front of the camera. The device will need to be equipped with a tele-
prompng applicaon or soware allowing mirroring of text.
A tripod capable of supporng the weight of the enre setup.
Compability
DSLR/Mirrorless Cameras: the distance between the mounng hole at the
boom of the camera and the front of the lens should not exceed or 7.9
20cm
Tablet/Cell phone: the maximum display the TMP 100 will accommodate
without part of the screen being cut o is or 26.5cm x 20cm10.5”x 8”
App Download
Download a free or a paid version of a tele-
prompter in the app store of your tablet or cell-
phone. The app must be able to mirror the script
in order to funcon properly with the TMP 100.
TMP 100
1 The TMP 100 can be set on a at surface or
mounted onto a tripod.
When using a tripod, remove the cheese-
plate from the tripod head and screw it onto
one of the mounng holes at the boom of
the TMP 100.
For more informaon please visit our website: www.glidegear.net
2
3
4
5
6
Fig. A
Fig C.
Using the thumb screws on both sides of the
mirror, place the frame at a 45 degree angle -
(Fig. A).
The TMP s back plate features a 1/4100’ -20
mounng screw inside a slot. (Fig. B).
Mount the camera on the 1/4 20 screw.-
Using the Velcro straps on the side of the
mirror, aach the TMP s hood around 100
the frame and zip up the sides.
Place your camera lens inside the sock build
into the hood.
If you are using a cellphone, place the sock
around the phone so that you can sll see the
screen.
Loosen the 2 thumbscrews below the camera
plate to extend the tray forward ( Fig.C)
Assembly
TMP 100
7 Place your prompng device on the tray.
Fig. D
If needed, adjust the posion of the mirror in
the same way you did in Step 2
8 Secure the posion of your prompng device by
clamping it in between the 2 clamps already
mounted onto the tray. (Fig E).
Make sure to secure the tray by ghtening the
thumbscrews from Step 6.
9
10
For more informaon please visit our website: www.glidegear.net
Fig. F
Your setup should look like Fig. E.
Mounng Accessories
The TMP 100 includes 2 extra 1/4 20 mounng screws. -
Use the mounng screws to mount the accessories of your choice on each side od the frame holding the
mirror as pictured in Fig. F


Specyfikacje produktu

Marka: Glide Gear
Kategoria: nieskategoryzowany
Model: TMP 100

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Glide Gear TMP 100, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje nieskategoryzowany Glide Gear

Instrukcje nieskategoryzowany

Najnowsze instrukcje dla nieskategoryzowany

Meec Tools

Meec Tools 010-084 Instrukcja

6 Października 2024
Outwell

Outwell Scenic Road 250 Instrukcja

5 Października 2024
Impact

Impact QuikBalance Instrukcja

4 Października 2024
Impact

Impact CA-112 Instrukcja

4 Października 2024
Impact

Impact LS-BHA Instrukcja

4 Października 2024
Impact

Impact LKB-5C Instrukcja

4 Października 2024
Impact

Impact RST-001 Instrukcja

4 Października 2024