Instrukcja obsługi Gigabyte H410M S2H

Gigabyte płyta główna H410M S2H

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Gigabyte H410M S2H (64 stron) w kategorii płyta główna. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/64

For more product details, please visit GIGABYTE's website.

To reduce the impacts on global warming, the packaging materials of this product

are recyclable and reusable. GIGABYTE works with you to protect the environment.

H410M S2H

User's Manual

Rev. 1001

The trademarks mentioned in this manual are legally registered to their respective owners.

Disclaimer

Information in this manual is protected by copyright laws and is the property of GIGABYTE.

Changes to the specications and features in this manual may be made by GIGABYTE

without prior notice.

No part of this manual may be reproduced, copied, translated, transmitted, or published in any

form or by any means without GIGABYTE's prior written permission.

In order to assist in the use of this product, carefully read the User's Manual.

For product-related information, check on our website at: https://www.gigabyte.com

Identifying Your Motherboard Revision

The revision number on your motherboard looks like this: "REV: X.X." For example, "REV:

1.0" means the revision of the motherboard is 1.0. Check your motherboard revision before

updating motherboard BIOS, drivers, or when looking for technical information.

Example:

- 3 -

Table of Contents

H410M S2H Motherboard Layout 4 ....................................................................................

Chapter 1 Hardware Installation 5 .....................................................................................

1-1 Installation Precautions 5 ....................................................................................

1-2 ProductSpecications ...................................................................................... 6

1-3 Installing the CPU 9 ............................................................................................

1-4 Installing the Memory 9 .......................................................................................

1-5 Installing an Expansion Card 10 .........................................................................

1-6 Back Panel Connectors 10 ..................................................................................

1-7 Internal Connectors 12 ........................................................................................

Chapter 2 BIOS Setup 19 ..................................................................................................

2-1 Startup Screen 19 ...............................................................................................

2-2 The Main Menu 20 ..............................................................................................

2-3 Favorites (F11) 21 ...............................................................................................

2-4 Tweaker .......................................................................................................... 22

2-5 Settings .......................................................................................................... 27

2-6 System Info. 32 ...................................................................................................

2-7 Boot ................................................................................................................ 33

2-8 Save & Exit 36 .....................................................................................................

Chapter 3 Appendix 37 ......................................................................................................

Drivers Installation 37 .....................................................................................................

Regulatory Notices 38 ....................................................................................................

Contact Us 39 ................................................................................................................

- 4 -

H410M S2H Motherboard Layout

* The box contents above are for reference only and the actual items shall depend on the product package you obtain.

The box contents are subject to change without notice.

Box Contents

5H410M S2H motherboard

5Motherboard driver disc 5Two SATA cables

5User's Manual 5I/O Shield

KB_MS

CPU_FAN

SYS_FAN

LGA1200

ATX

H410M S2H

F_AUDIO COMA LED_C

AUDIO

BAT

ATX_12V_2X4

Intel® H410

U32

CODEC

CLR_CMOS

M_BIOS

DVI

VGA

HDMI

USB_LAN

PCIEX16

80 60 42

PCIEX1_1

PCIEX1_2

iTE®

Super I/O

Realtek®

GbE LAN

F_USB F_PANEL

SPI_TPM

F_U32

DDR4_B1

DDR4_A1

M2A_SB

3 2

1 0

SATA3

USB20

SPKR

Chapter 1 Hardware Installation

1-1 Installation Precautions

The motherboard contains numerous delicate electronic circuits and components which can become

damaged as a result of electrostatic discharge (ESD). Prior to installation, carefully read the user's

manual and follow these procedures:

•Prior to installation, make sure the chassis is suitable for the motherboard.

•Prior to installation, do not remove or break motherboard S/N (Serial Number) sticker or

warranty sticker provided by your dealer. These stickers are required for warranty validation.

•Always remove the AC power by unplugging the power cord from the power outlet before

installing or removing the motherboard or other hardware components.

•When connecting hardware components to the internal connectors on the motherboard, make

sure they are connected tightly and securely.

•When handling the motherboard, avoid touching any metal leads or connectors.

•It is best to wear an electrostatic discharge (ESD) wrist strap when handling electronic

components such as a motherboard, CPU or memory. If you do not have an ESD wrist strap,

keepyourhandsdryandrsttouchametalobjecttoeliminatestaticelectricity.

•Prior to installing the motherboard, please have it on top of an antistatic pad or within an

electrostatic shielding container.

•Before connecting or unplugging the power supply cable from the motherboard, make sure

the power supply has been turned off.

•Before turning on the power, make sure the power supply voltage has been set according to

the local voltage standard.

•Before using the product, please verify that all cables and power connectors of your hardware

components are connected.

•To prevent damage to the motherboard, do not allow screws to come in contact with the

motherboard circuit or its components.

•Make sure there are no leftover screws or metal components placed on the motherboard or

within the computer casing.

•Do not place the computer system on an uneven surface.

•Do not place the computer system in a high-temperature or wet environment.

•Turning on the computer power during the installation process can lead to damage to system

components as well as physical harm to the user.

•If you are uncertain about any installation steps or have a problem related to the use of the

product,pleaseconsultacertiedcomputertechnician.

•If you use an adapter, extension power cable, or power strip, ensure to consult with its installation

and/or grounding instructions.

- 5 -

1-2 ProductSpecications

CPU Support for 10th Generation Intel® Core™ i9 processors/Intel® Core™ i7 processors/

Intel® Core™ i5 processors/Intel® Core™ i3 processors/Intel® Pentium® processors/

Intel® Celeron® processors in the LGA1200 package

(Go to GIGABYTE's website for the latest CPU support list.)

L3 cache varies with CPU

Chipset Intel® H410 Express Chipset

Memory Intel® Core

™ i9/i7 processors:

- Support for DDR4 2933/2666/2400/2133 MHz memory modules

Intel® Core

™ i5/i3/Pentium®/Celeron® processors:

- Support for DDR4 2666/2400/2133 MHz memory modules

 2 x DDR4 DIMM sockets supporting up to 64 GB (32 GB single DIMM capacity)

of system memory

Dual channel memory architecture

 Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in

non-ECC mode)

Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules

SupportforExtremeMemoryProle(XMP)memorymodules

(Go to GIGABYTE's website for the latest supported memory speeds and memory

modules.)

Onboard

Graphics

Integrated Graphics Processor-Intel® HD Graphics support:

- 1 x D-Sub port, supporting a maximum resolution of 1920x1200@60 Hz

- 1 x DVI-D port, supporting a maximum resolution of 1920x1200@60 Hz

* The DVI-D port does not support D-Sub connection by adapter.

- 1 x HDMI port, supporting a maximum resolution of 4096x2160@30 Hz

* Support for HDMI 1.4 version and HDCP 2.3.

Support for up to dual-display at the same time

Maximum shared memory of 512 MB

Audio Realtek® ALC887 codec

HighDenitionAudio

2/4/5.1/7.1-channel

* Tocongure7.1-channelaudio,youneedtoopentheaudiosoftwareandselect

Deviceadvanced settings> PlaybackDevice tochange the default settingrst.

PleasevisitGIGABYTE'swebsitefordetailsonconguringtheaudiosoftware.

LAN Realtek® GbE LAN chip (1000/100 Mbit)

Expansion Slots 1 x PCI Express p6-x16 slot, running at x16

2 x PCI Express p6-x1 slot

(The PCI Express slots conform to PCI Express 3.0 standard..)

Storage Interface  1 x M.2 connector (Socket 3, M key, type 2242/2260/2280 SATA and PCIe p6-x2

SSD support)

4 x SATA 6Gb/s connectors

* Refer to "1-7 Internal Connectors," for the installation notices for the M.2 and SATA

connectors.

- 6 -

USB Chipset:

- 4 x USB 3.2 Gen 1 ports (2 ports on the back panel, 2 ports available through

the internal USB header)

- 6 x USB 2.0/1.1 ports (4 ports on the back panel, 2 ports available through

the internal USB header)

Internal

Connectors

1 x 24-pin ATX main power connector

1 x 8-pin ATX 12V power connector

4 x SATA 6Gb/s connectors

1 x CPU fan header

1 x system fan header

1 x RGB LED strip header

1 x front panel header

1 x front panel audio header

1 x speaker header

1 x USB 3.2 Gen 1 header

1 x USB 2.0/1.1 header

 1 x Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI

2.0 module only)

1 x serial port header

1 x Clear CMOS jumper

Back Panel

Connectors

1 x PS/2 keyboard port

1 x PS/2 mouse port

1 x D-Sub port

1 x DVI-D port

1 x HDMI port

2 x USB 3.2 Gen 1 ports

4 x USB 2.0/1.1 ports

1 x RJ-45 port

3 x audio jacks

I/O Controller iTE® I/O Controller Chip

Hardware

Monitor

Voltage detection

Temperature detection

Fan speed detection

Overheating warning

Fan fail warning

Fan speed control

* Whether the fan speed control function is supported will depend on the

cooler you install.

BIOS 1x128Mbitash

Use of licensed AMI UEFI BIOS

PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0

- 7 -

Unique Features Support for APP Center

* Available applications in APP Center may vary by motherboard model. Supported

functionsofeachapplicationmayalsovarydependingonmotherboardspecications.

- @BIOS

- Ambient LED

- EasyTune

- Fast Boot

- Game Boost

- ON/OFF Charge

- Smart Backup

- System Information Viewer

Support for Q-Flash

Support for Xpress Install

Bundled

Software

Norton® Internet Security (OEM version)

Realtek®

8118 Gaming LAN Bandwidth Control Utility

Operating

System Support for Windows 10 64-bit

Form Factor Micro ATX Form Factor; 22.6cm x 18.5cm

* GIGABYTEreservestherighttomakeanychangestotheproductspecicationsandproduct-relatedinformationwithout

prior notice.

- 8 -

Please visit GIGABYTE's website

for support lists of CPU, memory

modules, SSDs, and M.2 devices.

Please visit the Support\Utility List

page on GIGABYTE's website to

download the latest version of apps.

1-3 Installing the CPU

Please visit GIGABYTE's website for details on hardware installation.

Installing the CPU

Locate the alignment keys on the motherboard CPU socket and the notches on the CPU.

Do not remove the CPU socket cover before inserting the CPU. It may pop off from the load

plate automatically during the process of re-engaging the lever after you insert the CPU.

Triangle Pin One Marking on the CPU

NotchNotch

LGA1200 CPU

Alignment

Key

Alignment

Key

LGA1200 CPU Socket

Pin One Corner of the CPU Socket

Read the following guidelines before you begin to install the CPU:

•Make sure that the motherboard supports the CPU.

(Go to GIGABYTE's website for the latest CPU support list.)

•Always turn off the computer and unplug the power cord from the power outlet before installing the

CPU to prevent hardware damage.

•Locate the pin one of the CPU. The CPU cannot be inserted if oriented incorrectly. (Or you may

locate the notches on both sides of the CPU and alignment keys on the CPU socket.)

•Apply an even and thin layer of thermal grease on the surface of the CPU.

•Do not turn on the computer if the CPU cooler is not installed, otherwise overheating and damage

of the CPU may occur.

•SettheCPUhostfrequencyinaccordancewiththeCPUspecications.Itisnotrecommended

thatthesystembusfrequencybesetbeyondhardwarespecicationssinceitdoesnotmeetthe

standard requirements for the peripherals. If you wish to set the frequency beyond the standard

specications,pleasedosoaccordingtoyourhardwarespecicationsincludingtheCPU,graphics

card, memory, hard drive, etc.

1-4 Installing the Memory

Read the following guidelines before you begin to install the memory:

•Make sure that the motherboard supports the memory. It is recommended that memory of the same

capacity, brand, speed, and chips be used.

(Go to GIGABYTE's website for the latest supported memory speeds and memory modules.)

•Always turn off the computer and unplug the power cord from the power outlet before installing the

memory to prevent hardware damage.

•Memory modules have a foolproof design. A memory module can be installed in only one direction.

If you are unable to insert the memory, switch the direction.

DualChannelMemoryConguration

This motherboard provides two memory sockets and supports Dual Channel Technology. After the memory

isinstalled,theBIOSwillautomaticallydetectthespecicationsandcapacityofthememory.EnablingDual

Channel memory mode will double the original memory bandwidth.

- 9 -

1-6 Back Panel Connectors

PS/2 Keyboard and PS/2 Mouse Port

Use the upper port (green) to connect a PS/2 mouse and the lower port (purple) to connect a PS/2 keyboard.

D-Sub Port

The D-Sub port supports a 15-pin D-Sub connector and supports a maximum resolution of 1920x1200@60 Hz

(the actual resolutions supported depend on the monitor being used). Connect a monitor that supports

D-Sub connection to this port.

DVI-D Port (Note)

TheDVI-DportconformstotheDVI-Dspecicationandsupportsamaximumresolutionof1920x1200@60Hz

(the actual resolutions supported depend on the monitor being used). Connect a monitor that supports

DVI-D connection to this port.

HDMI Port

The HDMI port supports HDCP 2.3 and Dolby TrueHD and DTS HD Master Audio

formats. It also supports up to 192KHz/16bit 7.1-channel LPCM audio output.

You can use this port to connect your HDMI-supported monitor. The maximum supported resolution is

4096x2160@30 Hz, but the actual resolutions supported are dependent on the monitor being used.

(Note) The DVI-D port does not support D-Sub connection by adapter.

After installing the HDMI device, make sure to set the default sound playback device to HDMI.

(The item name may differ depending on your operating system.)

1-5 Installing an Expansion Card

Read the following guidelines before you begin to install an expansion card:

•Make sure the motherboard supports the expansion card. Carefully read the manual that came

with your expansion card.

•Always turn off the computer and unplug the power cord from the power outlet before installing an

expansion card to prevent hardware damage.

Due to CPU limitations, read the following guidelines before installing the memory in Dual Channel mode.

1. Dual Channel mode cannot be enabled if only one memory module is installed.

2. When enabling Dual Channel mode with two memory modules, it is recommended that memory of

the same capacity, brand, speed, and chips be used.

The two DDR4 memory sockets are divided into two channels and each channel has one memory socket as

following:

Channel A: DDR4_A1

Channel B: DDR4_B1

•Whenremovingthecableconnectedtoabackpanelconnector,rstremovethecablefromyour

device and then remove it from the motherboard.

•When removing the cable, pull it straight out from the connector. Do not rock it side to side to

prevent an electrical short inside the cable connector.

- 10 -

USB 2.0/1.1 Port

TheUSBportsupportstheUSB2.0/1.1specication.UsethisportforUSBdevices.

USB 3.2 Gen 1 Port

TheUSB3.2Gen1portsupportstheUSB3.2Gen1specicationandiscompatibletotheUSB2.0

specication.UsethisportforUSBdevices.

RJ-45 LAN Port

The Gigabit Ethernet LAN port provides Internet connection at up to 1 Gbps data rate. The following

describes the states of the LAN port LEDs.

AudioJackCongurations:

Jack Headphone/

2-channel 4-channel 5.1-channel 7.1-channel

Line In/Rear Speaker Out a a a

Line Out/Front Speaker Out a a a a

Mic In/Center/Subwoofer Speaker Out a a

Front Panel Line Out/Side Speaker Out a

PleasevisitGIGABYTE'swebsitefordetailsonconguringtheaudiosoftware.

Activity LED

Connection/

Speed LED

LAN Port

Activity LED:

Connection/Speed LED:

State Description

Orange 1 Gbps data rate

Green 100 Mbps data rate

Off 10 Mbps data rate

State Description

Blinking Data transmission or receiving is occurring

Off No data transmission or receiving is occurring

Line In/Rear Speaker Out (Blue)

The line in jack. Use this audio jack for line in devices such as an optical drive, walkman, etc.

Line Out/Front Speaker Out (Green)

The line out jack. Use this audio jack for a headphone or 2-channel speaker.

Mic In/Center/Subwoofer Speaker Out (Pink)

The Mic in jack.

•TheintegratedHD(HighDenition)audioprovidesjackretaskingcapabilitythatallowsthe

user to change the function for each jack through the audio driver.

•To congure 7.1-channel audio, you need to open the audio software and select Device

advancedsettings>PlaybackDevicetochangethedefaultsettingrst.

- 11 -

1-7 Internal Connectors

Read the following guidelines before connecting external devices:

•First make sure your devices are compliant with the connectors you wish to connect.

•Before installing the devices, be sure to turn off the devices and your computer. Unplug the power

cord from the power outlet to prevent damage to the devices.

•After installing the device and before turning on the computer, make sure the device cable has

been securely attached to the connector on the motherboard.

4 1 3

859

1312

1) ATX_12V_2X4

2) ATX

3) CPU_FAN

4) SYS_FAN

5) LED_C

6) SATA3 0/1/2/3

7) M2A_SB

8) F_PANEL

9) F_AUDIO

10) F_U32

11) F_USB

12) COMA

13) SPI_TPM

14) CLR_CMOS

15) BAT

16) SPKR

- 12 -

131

2412

ATX

To meet expansion requirements, it is recommended that a power supply that can withstand high

power consumption be used (500W or greater). If a power supply is used that does not provide the

required power, the result can lead to an unstable or unbootable system.

ATX:

Pin No. Pin No.Denition Denition

1 3.3V 13 3.3V

2 3.3V 14 -12V

3 GND 15 GND

4 +5V 16 PS_ON (soft On/Off)

5 GND 17 GND

6 +5V 18 GND

7 GND 19 GND

8 Power Good 20 NC

9 5VSB (stand by +5V) 21 +5V

10 +12V 22 +5V

11 +12V (Only for 2x12-pin

ATX)

23 +5V (Only for 2x12-pin ATX)

12 3.3V (Only for 2x12-pin

ATX)

24 GND (Only for 2x12-pin ATX)

1/2) ATX_12V_2X4/ATX (2x4 12V Power Connector and 2x12 Main Power Connector)

With the use of the power connector, the power supply can supply enough stable power to all the components

onthemotherboard.Beforeconnectingthepowerconnector,rstmakesurethepowersupplyisturned

off and all devices are properly installed. The power connector possesses a foolproof design. Connect the

power supply cable to the power connector in the correct orientation.

The 12V power connector mainly supplies power to the CPU. If the 12V power connector is not connected,

the computer will not start.

ATX_12V_2X4:

Pin No. Pin No.Denition Denition

1 GND (Only for 2x4-pin 12V) 5 +12V (Only for 2x4-pin 12V)

2 GND (Only for 2x4-pin 12V) 6 +12V (Only for 2x4-pin 12V)

3 GND 7 +12V

4 GND 8 +12V

ATX_12V_2X4

3/4) CPU_FAN/SYS_FAN (Fan Headers)

All fan headers on this motherboard are 4-pin. Most fan headers possess a foolproof insertion design.

When connecting a fan cable, be sure to connect it in the correct orientation (the black connector wire is

the ground wire). The speed control function requires the use of a fan with fan speed control design. For

optimum heat dissipation, it is recommended that a system fan be installed inside the chassis.

•Be sure to connect fan cables to the fan headers to prevent your CPU and system from

overheating. Overheating may result in damage to the CPU or the system may hang.

•Thesefanheadersarenotcongurationjumperblocks.Donotplaceajumpercapontheheaders.

CPU_FAN

SYS_FAN

Pin No. Denition

1 GND

2 Voltage Speed Control

3 Sense

4 PWM Speed Control

- 13 -

6) SATA3 0/1/2/3 (SATA 6Gb/s Connectors)

The SATA connectors conform to SATA 6Gb/s standard and are compatible with SATA 3Gb/s and SATA

1.5Gb/s standard. Each SATA connector supports a single SATA device.

Pin No. Denition

1 GND

2 TXP

3 TXN

4 GND

5 RXN

6 RXP

7 GND

SATA3

3 2

1 0

5) LED_C (RGB LED Strip Header)

The header can be used to connect a standard 5050 RGB LED strip (12V/G/R/B), with maximum power

rating of 2A (12V) and maximum length of 2m.

Pin No. Denition

1 12V

2 G

3 R

4 B

Before installing the devices, be sure to turn off the devices and your computer. Unplug the power

cord from the power outlet to prevent damage to the devices.

Connect your RGB LED strip to the header. The power pin (marked

with a triangle on the plug) of the LED strip must be connected to Pin

1 (12V) of this header. Incorrect connection may lead to the damage

of the LED strip.

For how to turn on/off the lights of the LED strip please visit the "Unique Features" webpage of

GIGABYTE's website.

LED_C

RGB LED Strip

12V

To enable hot-plugging for the SATA ports, refer to Chapter 2, "BIOS Setup," "Settings\IO Ports\

SATAAndRSTConguration,"formoreinformation.

- 14 -

Select the proper hole for the M.2 SSD to be installed and refasten the screw and standoff.

7) M2A_SB (M.2 Socket 3 Connector)

The M.2 connector supports M.2 SATA SSDs and M.2 PCIe SSDs.

80 60 42

Installation Notices for the M.2 and SATA Connectors:

The availability of the SATA connectors may be affected by the type of device installed in the M2A_SB

connector. The M2A_SB connector shares bandwidth with the SATA3 3 connector. Refer to the following

table for details.

SATA3 0 SATA3 1 SATA3 2 SATA3 3

M.2 SATA SSD aaa r

M.2 PCIe SSD

aaaa

No M.2 SSD Installed aaaa

a r: Available, : Not available

* The M2A_SB connector supports up to PCIe p15-x2 SSDs only.

Connector

Type of

M.2 SSD

Follow the steps below to correctly install an M.2 SSD in the M.2 connector.

Step 1:

LocatethepropermountingholefortheM.2SSDtobeinstalledandtheninstallthemountingcliprst.

Step 2:

Slide the M.2 SSD into the connector at an angle.

Step 3:

Press the M.2 SSD down and then secure it by pressing the clip pin into the mounting hole.

- 15 -

The front panel design may differ by chassis. A front panel module mainly consists of power switch,

reset switch, power LED, hard drive activity LED, speaker and etc. When connecting your chassis

front panel module to this header, make sure the wire assignments and the pin assignments are

matched correctly.

8) F_PANEL (Front Panel Header)

Connect the power switch, reset switch, speaker, chassis intrusion switch/sensor and system status indicator

on the chassis to this header according to the pin assignments below. Note the positive and negative pins

before connecting the cables.

System Status LED

S0 On

S3/S4/S5 Off

•PW (Power Switch):

Connects to the power switch on the chassis front panel. You may

congure the way to turn off your system using the power switch

(refer to Chapter 2, "BIOS Setup," "Settings\Platform Power," for more

information).

•SPEAK (Speaker):

Connects to the speaker on the chassis front panel. The system reports

system startup status by issuing a beep code. One single short beep

will be heard if no problem is detected at system startup.

•PLED/PWR_LED (Power LED):

Connects to the power status indicator

on the chassis front panel. The LED is on

when the system is operating. The LED is

off when the system is in S3/S4 sleep state

or powered off (S5).

•HD (Hard Drive Activity LED):

Connects to the hard drive activity LED on the chassis front panel. The LED is on when the hard drive

is reading or writing data.

•RES (Reset Switch):

Connects to the reset switch on the chassis front panel. Press the reset switch to restart the computer

if the computer freezes and fails to perform a normal restart.

•CI (Chassis Intrusion Header):

Connects to the chassis intrusion switch/sensor on the chassis that can detect if the chassis cover has

been removed. This function requires a chassis with a chassis intrusion switch/sensor.

•NC: No connection.

PLED-

PW-

SPEAK+

SPEAK-

PLED+

PW+

HD-

RES+

HD+

RES-

Hard Drive

Activity LED

Reset

Switch

Power LED

CI-

CI+

Power LED

Chassis Intrusion

Header

Power Switch Speaker

PWR_LED-

PWR_LED+

9) F_AUDIO (Front Panel Audio Header)

 ThefrontpanelaudioheadersupportsHighDenitionaudio(HD).Youmayconnectyourchassisfront

panel audio module to this header. Make sure the wire assignments of the module connector match the

pin assignments of the motherboard header. Incorrect connection between the module connector and the

motherboard header will make the device unable to work or even damage it.

Some chassis provide a front panel audio module that has separated connectors on each wire instead

of a single plug. For information about connecting the front panel audio module that has different wire

assignments, please contact the chassis manufacturer.

Pin No. Pin No.Denition Denition

1 MIC2_L 6 Sense

2 GND 7 FAUDIO_JD

3 MIC2_R 8 No Pin

4 NC 9 LINE2_L

5 LINE2_R 10 Sense

- 16 -

Pin No. Pin No.Denition Denition

1 VBUS D2+11

2 SSRX1- 12 D2-

3 SSRX1+ 13 GND

4 GND 14 SSTX2+

5 SSTX1- 15 SSTX2-

6 SSTX1+ 16 GND

7 GND 17 SSRX2+

8 D1- 18 SSRX2-

9 D1+ 19 VBUS

10 NC 20 No Pin

10) F_U32 (USB 3.2 Gen 1 Header)

 TheheaderconformstoUSB3.2Gen1andUSB2.0specicationandcanprovidetwoUSBports.For

purchasing the optional 3.5" front panel that provides two USB 3.2 Gen 1 ports, please contact the local

dealer.

20 1

11) F_USB (USB 2.0/1.1 Header)

 TheheaderconformstoUSB2.0/1.1specication.EachUSBheadercanprovidetwoUSBportsviaan

optional USB bracket. For purchasing the optional USB bracket, please contact the local dealer.

Pin No. Pin No.Denition Denition

1 Power (5V) 6 USB DY+

2 Power (5V) 7 GND

3 USB DX- 8 GND

4 USB DY- 9 No Pin

5 USB DX+ 10 NC

•Do not plug the IEEE 1394 bracket (2x5-pin) cable into the USB 2.0/1.1 header.

•Prior to installing the USB bracket, be sure to turn off your computer and unplug the power cord

from the power outlet to prevent damage to the USB bracket.

12) COMA (Serial Port Header)

The COM header can provide one serial port via an optional COM port cable. For purchasing the optional

COM port cable, please contact the local dealer.

Pin No. Pin No.Denition Denition

1 NDCD- 6 NDSR-

2 NSIN 7 NRTS-

3 NSOUT 8 NCTS-

4 NDTR- 9 NRI-

5 GND 10 No Pin

- 17 -

13) SPI_TPM (Trusted Platform Module Header)

You may connect an SPI TPM (Trusted Platform Module) to this header.

Pin No. Pin No.Denition Denition

1Data Output 7Chip Select

2Power (3.3V) 8GND

3No Pin 9IRQ

4NC 10 NC

5Data Input 11 NC

6CLK 12 RST

F_USB3F

14) CLR_CMOS (Clear CMOS Jumper)

 UsethisjumpertocleartheBIOScongurationandresettheCMOSvaluestofactorydefaults.Toclear

the CMOS values, use a metal object like a screwdriver to touch the two pins for a few seconds.

•Always turn off your computer and unplug the power cord from the power outlet before clearing

the CMOS values.

•After system restart, go to BIOS Setup to load factory defaults (select Load Optimized Defaults) or

manuallyconguretheBIOSsettings(refertoChapter2,"BIOSSetup,"forBIOScongurations).

Open: Normal

Short: Clear CMOS Values

15) BAT (Battery)

 Thebatteryprovidespowertokeepthevalues(suchasBIOScongurations,date,andtimeinformation)

in the CMOS when the computer is turned off. Replace the battery when the battery voltage drops to a low

level, or the CMOS values may not be accurate or may be lost.

You may clear the CMOS values by removing the battery:

1. Turn off your computer and unplug the power cord.

2. Gently remove the battery from the battery holder and wait for one minute. (Or use a

metal object like a screwdriver to touch the positive and negative terminals of the battery

holder, making them short for 5 seconds.)

3. Replace the battery.

4. Plug in the power cord and restart your computer.

•Always turn off your computer and unplug the power cord before replacing the battery.

•Replace the battery with an equivalent one. Damage to your devices may occur if the battery is

replaced with an incorrect model.

•Contact the place of purchase or local dealer if you are not able to replace the battery by yourself

or uncertain about the battery model.

•When installing the battery, note the orientation of the positive side (+) and the negative side (-)

of the battery (the positive side should face up).

•Used batteries must be handled in accordance with local environmental regulations.

16) SPKR (Speaker Header)

The system reports system startup status by issuing a beep code. One single short beep will be heard if no

problem is detected at system startup. This header can also provide audio output in the operating system.

Pin No. Denition

1 SPK+

2 SPK-

- 18 -

BIOS (Basic Input and Output System) records hardware parameters of the system in the CMOS on the

motherboard. Its major functions include conducting the Power-On Self-Test (POST) during system startup,

saving system parameters and loading operating system, etc. BIOS includes a BIOS Setup program that allows

theusertomodifybasicsystemcongurationsettingsortoactivatecertainsystemfeatures.

When the power is turned off, the battery on the motherboard supplies the necessary power to the CMOS to

keepthecongurationvaluesintheCMOS.

To access the BIOS Setup program, press the <Delete> key during the POST when the power is turned on.

To upgrade the BIOS, use either the GIGABYTE Q-Flash or @BIOS utility.

•Q-Flash allows the user to quickly and easily upgrade or back up BIOS without entering the operating system.

•@BIOS is a Windows-based utility that searches and downloads the latest version of BIOS from the Internet

and updates the BIOS.

Chapter 2 BIOS Setup

•BecauseBIOSashingispotentiallyrisky,ifyoudonotencounterproblemsusingthecurrent

versionofBIOS,itisrecommendedthatyounotashtheBIOS.ToashtheBIOS,doitwith

caution.InadequateBIOSashingmayresultinsystemmalfunction.

•It is recommended that you not alter the default settings (unless you need to) to prevent system

instability or other unexpected results. Inadequately altering the settings may result in system's

failure to boot. If this occurs, try to clear the CMOS values and reset the board to default values.

(Refer to the "Load Optimized Defaults" section in this chapter or introductions of the battery/clear

CMOS jumper in Chapter 1 for how to clear the CMOS values.)

2-1 Startup Screen

The following startup Logo screen will appear when the computer boots.

Function Keys

•When the system is not stable as usual, select the item to set your system to its defaults.Load Optimized Defaults

•The BIOS Setup menus described in this chapter are for reference only and may differ by BIOS version.

There are two different BIOS modes as follows and you can use the <F2> key to switch between the two modes.

Easy Mode allows users to quickly view their current system information or to make adjustments for optimum

performance.InEasyMode,youcanuseyourmousetomovethroughcongurationitems.TheAdvancedMode

provides detailed BIOS settings. You can press the arrow keys on your keyboard to move among the items

and press <Enter> to accept or enter a sub-menu. Or you can use your mouse to select the item you want.

- 19 -

2-2 The Main Menu

Hardware

Information

Option Description Current Settings

Setup Menus

Conguration

Items

System

Time

Quick Access Bar allows you to quickly move to

the General Help, Easy Mode, Smart Fan 5, or

Q-Flash screen.

Advanced Mode Function Keys

<f><g> Move the selection bar to select a setup menu

<h><i>Movetheselectionbartoselectancongurationitemonamenu

<Enter>/Double Click Execute command or enter a menu

<+ >/<Page Up> Increase the numeric value or make changes

<->/<Page Down> Decrease the numeric value or make changes

<F1> Show descriptions of the function keys

<F2> Switch to Easy Mode

<F3> SavethecurrentBIOSsettingstoaprole

<F4> LoadtheBIOSsettingsfromaprolecreatedbefore

<F5> Restore the previous BIOS settings for the current submenus

<F6> Display the Smart Fan 5 screen

<F7> Load the Optimized BIOS default settings for the current submenus

<F8> Access the Q-Flash utility

<F10> Save all the changes and exit the BIOS Setup program

<F11> Switch to the Favorites submenu

<F12> Capture the current screen as an image and save it to your USB drive

<Insert> Add or remove a favorite option

<Ctrl>+<S> Display information on the installed memory

<Esc> Main Menu: Exit the BIOS Setup program

Submenus: Exit current submenu

- 20 -

2-3 Favorites (F11)

Set your frequently used options as your favorites and use the <F11> key to quickly switch to the page where

all of your favorite options are located. To add or remove a favorite option, go to its original page and press

<Insert> on the option. The option is marked with a star sign if set as a "favorite."

- 21 -

&CPU Clock Ratio

Allows you to alter the clock ratio for the installed CPU. The adjustable range is dependent on the CPU

being installed.

&Ring Ratio

Allows you to set the CPU Uncore ratio. The adjustable range is dependent on the CPU being used. (Default:

Auto)

&IGP Ratio (Note)

Allows you to set the Graphics Ratio. (Default: Auto)

&AVX Offset (Note)

AVX offset is the negative offset of AVX ratio.

 Advanced CPU Settings

&CPU Over Temperature Protection (Note)

 Allowsyoutone-tunetheTJMaxoffsetvalue.(Default:Auto)

&FCLK Frequency for Early Power On

Allows you to set the FCLK frequency. Options are: Normal(800Mhz), 1GHz, 400MHz. (Default: 1GHz)

&Hyper-Threading Technology

Allows you to determine whether to enable multi-threading technology when using an Intel® CPU that

supports this function. This feature only works for operating systems that support multi-processor mode.

AutoletstheBIOSautomaticallycongurethissetting.(Default:Auto)

&No. of CPU Cores Enabled

Allows you to select the number of CPU cores to enable in an Intel® multi-core CPU (the number of CPU

coresmayvarybyCPU).AutoletstheBIOSautomaticallycongurethissetting.(Default:Auto)

&VT-d

Enables or disables Intel® Virtualization Technology for Directed I/O. (Default: Enabled)

(Note) This item is present only when you install a CPU that supports this feature. For more information about

Intel® CPUs' unique features, please visit Intel's website.

2-4 Tweaker

Whether the system will work stably with the overclock/overvoltage settings you made is dependent on your overall

systemcongurations.Incorrectlydoingoverclock/overvoltagemayresultindamagetoCPU,chipset,ormemory

and reduce the useful life of these components. This page is for advanced users only and we recommend you not to

alter the default settings to prevent system instability or other unexpected results. (Inadequately altering the settings

may result in system's failure to boot. If this occurs, clear the CMOS values and reset the board to default values.)

- 22 -

&Intel(R) Speed Shift Technology (Intel® Speed Shift Technology) (Note)

Enables or disables Intel® Speed Shift Technology. Enabling this feature allows the processor to ramp up

its operating frequency more quickly and then improves the system responsiveness. (Default: Enabled)

&CPU Thermal Monitor (Note)

Enables or disables Intel®

Thermal Monitor function, a CPU overheating protection function. When enabled,

the CPU core frequency and voltage will be reduced when the CPU is overheated. lets the BIOS Auto

automaticallycongurethissetting.(Default:Auto)

&Ring to Core offset (Down Bin)

Allows you to determine whether to disable the CPU Ring ratio auto-down function. lets the BIOS Auto

automaticallycongurethissetting.(Default:Auto)

&CPU EIST Function (Note)

Enables or disables Enhanced Intel® Speed Step Technology (EIST). Depending on CPU loading, Intel®

EIST technology can dynamically and effectively lower the CPU voltage and core frequency to decrease

average power consumption and heat production. AutoletstheBIOSautomaticallycongurethissetting.

(Default: Auto)

&Race To Halt (RTH) (Note)/EnergyEfcientTurbo (Note)

Enables or disables the CPU power saving related settings.

&Voltage Optimization

Allows you to determine whether to enable voltage optimization to reduce power consumption. (Default:

Auto)

&Intel(R) Turbo Boost Technology (Note)

Allows you to determine whether to enable the Intel® CPU Turbo Boost technology. lets the BIOS Auto

automaticallycongurethissetting.(Default:Auto)

&Intel(R) Turbo Boost Max Technology 3.0 (Note)

Enables or disables Intel

® Turbo Boost Max Technology 3.0. Intel® Turbo Boost Max Technology 3.0 allows

the system to identify the processor's best performance core and lets you manually direct the most critical

workloads to it. You can even adjust the frequency of each core individually for performance optimization.

(Default: Enabled)

&CPU Flex Ratio Override

Enables or disables the CPU Flex Ratio. The maximum CPU clock ratio will be based on the CPU Flex

Ratio Settings CPU Clock Ratio Auto value if is set to . (Default: Disabled)

&CPU Flex Ratio Settings

Allows you to set the CPU Flex Ratio. The adjustable range may vary by CPU.

dActive Turbo Ratios

&Turbo Ratio (1-Core Active~10-Core Active)

Allows you to set the CPU Turbo ratios for different number of active cores. sets the CPU Turbo Auto

ratiosaccordingtotheCPUspecications.

Thisitemiscongurableonlywhen

Active Turbo Ratios is set

Enabled

(Default: Auto)

dC-States Control

&CPU Enhanced Halt (C1E)

Enables or disables Intel

CPU Enhanced Halt (C1E) function, a CPU power-saving function in system halt state.

When enabled, the CPU core frequency and voltage will be reduced during system halt state to decrease

power consumption. AutoletstheBIOSautomaticallycongurethissetting.Thisitemiscongurableonly

when is set to C-States Control Enabled. (Default: Auto)

(Note) This item is present only when you install a CPU that supports this feature. For more information about

Intel® CPUs' unique features, please visit Intel's website.

- 23 -

&C3 State Support (Note)

Allows you to determine whether to let the CPU enter C3 mode in system halt state. When enabled, the

CPU core frequency and voltage will be reduced during system halt state to decrease power consumption.

The C3 state is a more enhanced power-saving state than C1. AutoletstheBIOSautomaticallycongure

thissetting.ThisitemiscongurableonlywhenC-States Control Enabled is set to . (Default: Auto)

&C6/C7 State Support (Note)

Allows you to determine whether to let the CPU enter C6/C7 mode in system halt state. When enabled, the

CPU core frequency and voltage will be reduced during system halt state to decrease power consumption.

The C6/C7 state is a more enhanced power-saving state than C3. AutoletstheBIOSautomaticallycongure

thissetting.ThisitemiscongurableonlywhenC-States Control Enabled is set to . (Default: Auto)

&C8 State Support (Note)

Allows you to determine whether to let the CPU enter C8 mode in system halt state. When enabled, the CPU

core frequency and voltage will be reduced during system halt state to decrease power consumption. The

C8 state is a more enhanced power-saving state than C6/C7. AutoletstheBIOSautomaticallycongure

thissetting.ThisitemiscongurableonlywhenC-States Control Enabled is set to . (Default: Auto)

&C10 State Support (Note)

Allows you to determine whether to let the CPU enter C10 mode in system halt state. When enabled, the

CPU core frequency and voltage will be reduced during system halt state to decrease power consumption.

The C10 state is a more enhanced power-saving state than C8. AutoletstheBIOSautomaticallycongure

thissetting.ThisitemiscongurableonlywhenC-States Control Enabled is set to . (Default: Auto)

&Package C State Limit (Note)

Allows you to specify the C-state limit for the processor. AutoletstheBIOSautomaticallycongurethis

setting.ThisitemiscongurableonlywhenC-States Control Enabled is set to . (Default: Auto)

dTurbo Power Limits

Allows you to set a power limit for CPU Turbo mode. When the CPU power consumption exceeds the

speciedpowerlimit,theCPUwillautomaticallyreducethecorefrequencyinordertoreducethepower.

AutosetsthepowerlimitaccordingtotheCPUspecications.(Default:Auto)

&Package Power Limit TDP (Watts) / Package Power Limit Time

 AllowsyoutosetthepowerlimitforCPUTurbomodeandhowlongittakestooperateatthespeciedpower

limit.Ifthespeciedvalueisexceeded,theCPUwillautomaticallyreducethecorefrequencyinorderto

reduce the power. AutosetsthepowerlimitaccordingtotheCPUspecications.Thisitemiscongurable

only when Turbo Power Limits Enabled is set to . (Default: Auto)

&DRAM Power Limit (Watts) / DRAM Power Limit Time

 AllowsyoutosetthepowerlimitformemoryTurbomodeandhowlongittakestooperateatthespecied

power limit. AutoletstheBIOSautomaticallycongurethissetting.Thisitemiscongurableonlywhen

Turbo Power Limits Enabled is set to . (Default: Auto)

&Core Current Limit (Amps)

 AllowsyoutosetacurrentlimitforCPUTurbomode.WhentheCPUcurrentexceedsthespeciedcurrent

limit, the CPU will automatically reduce the core frequency in order to reduce the current. sets the Auto

powerlimitaccordingtotheCPUspecications.ThisitemiscongurableonlywhenTurbo Power Limits

is set to Enabled. (Default: Auto)

dTurbo Per Core Limit Control (Note)

Allows you to control each CPU core limit separately. (Default: Auto)

(Note) This item is present only when you install a CPU that supports this feature. For more information about

Intel® CPUs' unique features, please visit Intel's website.

- 24 -

&ExtremeMemoryProle(X.M.P.)(Note)

Allows the BIOS to read the SPD data on XMP memory module(s) to enhance memory performance when

enabled.

Disabled Disables this function. (Default)

Prole1  UsesProle1settings.

Prole2(Note) UsesProle2settings.

&System Memory Multiplier

Allows you to set the system memory multiplier. sets memory multiplier according to memory SPD Auto

data. (Default: Auto)

&Memory Ref Clock

Allows you to manually adjust the memory reference clock. (Default: Auto)

&Memory Odd Ratio (100/133 or 200/266)

allows Qclk to run in odd frequency. (Default: Auto)Enabled

 Advanced Memory Settings

&Memory Multiplier Tweaker

Provides different levels of memory auto-tuning. (Default: Auto)

&Channel Interleaving

Enables or disables memory channel interleaving. allows the system to simultaneously access Enabled

different channels of the memory to increase memory performance and stability. lets the BIOS Auto

automaticallycongurethissetting.(Default:Auto)

&Rank Interleaving

Enables or disables memory rank interleaving. allows the system to simultaneously access different Enabled

ranks of the memory to increase memory performance and stability. lets the BIOS automatically Auto

congurethissetting.(Default:Auto)

&Memory Boot Mode

Provides memory detection and training methods.

Auto    LetstheBIOSautomaticallycongurethissetting.(Default)

Normal The BIOS automatically performs memory training. Please note that if the system

becomes unstable or unbootable, try to clear the CMOS values and reset the board

to default values. (Refer to the introductions of the battery/clear CMOS jumper in

Chapter 1 for how to clear the CMOS values.)

EnableFastBoot Skipmemorydetectionandtraininginsomespeciccriteriaforfastermemory

boot.

Disable Fast Boot Detect and train memory at every single boot.

&Realtime Memory Timing

 Allowsyoutone-tunememorytimingsaftertheBIOSstage.(Default:Auto)

&Memory Enhancement Settings

Provides several memory performance enhancement settings: Auto, Relax OC, Enhanced Stability, Normal,

Enhanced Performance, High Frequency, High Density, and DDR-4500+. (Default: Auto)

&Memory Channel Detection Message

Allows you to determine whether to show an alert message when the memory is not installed in the optimal

memory channel. (Default: Enabled)

 SPD Info

Displays information on the installed memory.

(Note) This item is present only when you install a CPU and a memory module that support this feature.

- 25 -

Specyfikacje produktu

Marka:	Gigabyte
Kategoria:	płyta główna
Model:	H410M S2H
Kolor produktu:	Czarny
Źródło zasilania:	Kabel.
Wysokość produktu:	37 mm
Szerokość produktu:	65 mm
Głębokość produktu:	115 mm
Waga produktu:	127 g
Szerokość opakowania:	46 mm
Wysokość opakowania:	191 mm
Głębokość opakowania:	134 mm
Rekomendowane użycie:	PC
Ilość:	1
Obsługiwane systemy operacyjne Windows:	Windows 10 x64
Przeznaczenie:	Gaming
Ilość portów Ethernet LAN (RJ-45):	1
Układ:	Oburęczny
Wi-Fi:	Nie
Przewody:	USB
Kod zharmonizowanego systemu (HS):	84716070
Kanały wyjścia audio:	7.1 kan.
Liczba portów USB 2.0:	4
Przewodowa sieć LAN:	Tak
Interfejs urządzenia:	USB Typu-A
Typ przewijania (scroll type):	Koło
Liczba przycisków:	6
Rodzaj przycisków:	Wciskane przyciski
Rozdzielczość ruchu:	4000 DPI
Programowalne przyciski myszy:	Tak
Liczba kółek przewijania myszy:	1
Waga wraz z opakowaniem:	212.9 g
Kolor powierzchni:	Monochromatyczny
Wysokość skrzyni wzorcowej (zewnętrznej):	210 mm
Długość skrzyni głównej (zewnętrznej):	389 mm
Waga brutto obudowy głównej (zewnętrznej):	1973.4 g
Szerokość skrzyni zbiorczej (zewnętrznej):	146 mm
Producent procesora:	Intel
Ilość portów USB 3.2 Gen 1 (3.1 Gen 1) Typu-A:	2
Obsługiwane rodzaje pamięci:	DDR4-SDRAM
Typ slotów pamięci:	DIMM
Liczba gniazd pamięci:	2
Bez kody korekcyjnego:	Tak
Obsługiwane prędkości zegara pamięci:	2133,2400,2666 MHz
Maksymalna pojemność pamięci:	64 GB
Obsługa kanałów pamięci:	Dwukanałowy
Gniazdo procesora:	LGA 1200 (Socket H5)
Procesor:	Intel Celeron, Intel Core i3, Intel Core i5, Intel Core i7, Intel Core i9, Intel Pentium
Rodzina płyt z chipsetami:	Intel
Rodzaj płyty:	micro ATX
Układ płyty głównej:	Intel H410 Express
Typ BIOS:	UEFI AMI
Zworka clear CMOS:	Tak
Liczba gniazd M.2 (M):	1
Gniazdo zasilania ATX (24-pin):	Tak
Ilość złączy SATA III:	4
Ilość gniazd USB 2.0:	1
Łącza USB 3.2 Gen 1 (3.1 Gen 1):	1
Gniazdo wentylatora procesora:	Tak
Złącze audio na przednim panelu:	Tak
Złącze panelu przedniego:	Tak
Złącze TPM:	Tak
Liczba portów PS/2:	1
Ilość portów DVI-D:	1
Ilość portów HDMI:	1
Układ audio:	Realtek ALC887
Maksymalna liczba procesorów SMP:	1
Pamięć niebuforowana:	Tak
Gniazda PCI Express x16 (Gen 3.x):	1
Wspierane interfejsy dysków twardych:	SATA III
Obsługa przetwarzania równoległego:	Nieobsługiwany
Maks. rozdzielczość:	4096 x 2160 px
Rodzaj interfejsu sieci Ethernet:	Gigabit Ethernet
Przewodnik użytkownika:	Tak
Liczba portów VGA (D-Sub):	1
Wersja HDMI:	1.4
HDCP:	Tak
Dołączone oprogramowanie:	Norton Internet Security (OEM)\nRealtek 8118 Gaming LAN Bandwidth Control Utility
Korekcja ECC:	Tak
Monitorowanie stanu komputera:	FAN, Temperature, Voltage
Pamięć karty graficznej podsystemu graficznego:	512 MB
Złącze Serial port:	1
Złącze zasilania 12V:	Tak
LED RGB:	Tak
Rozmiar pamięci BIOS:	128 Mbit
Wersja ACPI:	5.0
Wersja interfejsu zarządzania pulpitem (DMI):	2.7
Wersja systemu BIOS (SMBIOS):	2.7
Gniazda PCI Express x1 (Gen 3.x):	2
Zawartość opakowania:	- Gaming mouse - User documentation
Rolka przewijająca:	Tak