Instrukcja obsługi Gigabyte GeForce GTX 1060 WINDFORCE 6G
Gigabyte
karta graficzna
GeForce GTX 1060 WINDFORCE 6G
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Gigabyte GeForce GTX 1060 WINDFORCE 6G (5 stron) w kategorii karta graficzna. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/5

NVIDIA® Graphics Accelerator
User's Manual
Rev. 107
Copyright
© 8 GIGABYTE TECHNOLOGY CO., LTD 201
Copyright by GIGA-BYTE TECHNOLOGY CO., LTD. ( GBT ). No part of this manual may be reproduced “ ”
or transmitted in any form without the expressed, written permission of GBT.
Trademarks
Third-party brands and names are the properties of their respective owners.
Notice
Please do not remove any labels on this graphics card. Doing so may void the warranty of this card.
Due to rapid change in technology, some of the specifications might be out of date before publication of
this manual. The author assumes no responsibility for any errors or omissions that may appear in this
document nor does the author make a commitment to update the information contained herein.
Rovi Product Notice
This product incorporates copyright protection technology that is protected by U.S. patents and other
intellectual property rights. Use of this copyright protection technology must be authorized by Rovi
Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by
Rovi Corporation. Reverse engineering or disassembly is prohibited.

5
3. Software Installation
Noce the following guidelines before installing the drivers:
1. First make sure your system has installed or later version. DirectX 11
2. Make sure your system has installed the appropriate motherboard drivers
(For the motherboard drivers, please contact the motherboard
manufacturer.)
※ Noce : The photos in this manual are for reference only and may not match
what you exactly see on your screen
3.1. Driver and Ulity Installaon
3.1.1. Driver AORUS ENGINE Installation and
Aer installing the operang system, insert the
driver disk into your opcal drive. The driver
Autorun screen is automacally displayed which
looks like that shown in the screen shot on the right.
(If the driver Autorun screen does not appear
automacally, go to My Computer, double-click the
opcal drive and execute the setup.exe program.)
Step 1:
Click the item. Install

8
Step 7:
Click the buon to Finish
complete AORUS ENGINE
installaon.
Step 8:
Aer installing AORUS
ENGINE, the window of
NVIDIA Driver would
appear.
Step 9:
Click the AGREE AND
CONTINUE buon.
Specyfikacje produktu
Marka: | Gigabyte |
Kategoria: | karta graficzna |
Model: | GeForce GTX 1060 WINDFORCE 6G |
Kolor produktu: | Czarny |
Moc: | 40 W |
Wysokość produktu: | 52 mm |
Szerokość produktu: | 385 mm |
Głębokość produktu: | 315 mm |
Waga produktu: | 1800 g |
Typ interfejsu: | PCI Express x16 3.0 |
Prędkość transferu danych przez Ethernet LAN: | 10,100,1000 Mbit/s |
Ilość portów Ethernet LAN (RJ-45): | 1 |
Napięcie operacyjne: | 12 V |
Zakres temperatur (eksploatacja): | -10 - 55 °C |
Zakres wilgotności względnej: | 10 - 90 % |
Układ: | Full-Height/Full-Length (FH/FL) |
Taktowanie procesora: | 1506 MHz |
Wi-Fi: | Nie |
Liczba portów USB 2.0: | 2 |
Pobór mocy: | 15 W |
Rodzaj chłodzenia: | Aktywne |
Liczba wentylatorów: | 2 went. |
Ilość portów DVI-D: | 2 |
Ilość portów HDMI: | 1 |
Szybkość przesyłania danych: | 8 Gbit/s |
Liczba obsługiwanych HDD: | 2 |
Maks. rozdzielczość: | 3840 x 2160 px |
Wersja DirectX: | 12.0 |
Ilość DisplayPort: | 1 |
NVIDIA G-SYNC: | Tak |
Wersja HDMI: | 2.0b |
HDCP: | Tak |
Możliwości montowania w stelażu: | Tak |
System dźwięku: | 2-drożny |
Obsługiwane protokoły sieciowe: | TCP/IP, DHCP, Hik-Connect, DNS, DDNS, NTP, SADP, SMTP, NFS, iSCSI, UPnP, HTTPS |
Pojemność HDD: | 0 GB |
Pojemność stelaża: | 1U |
Interfejs HDD: | SATA |
Maksymalna pojemność przchowywania: | 12 TB |
Maksymalne taktowanie procesora: | 1708 MHz |
Procesor graficzny: | GeForce GTX 1060 |
Rodzina procesorów grafiki: | NVIDIA |
Maksymalna rodzielczość cyfrowa: | 7680 x 4320 px |
Pamięć adaptera dedykowanej karty graficznej: | 6 GB |
Typ pamięci adaptera grafiki: | GDDR5 |
Magistrala pamięci: | 192 bit |
Wersja OpenGL: | 4.5 |
Dual Link DVI: | Tak |
Ilość gniazd: | 2 |
Wysokość wspornika: | Full-Height (FH) |
Minimalna moc zasilacza: | 400 W |
Wejścia kanałów wideo: | 8 kan. |
Wyjścia VGA (D-Sub): | 1 |
Dodatkowe złącza zasilania: | 1x 6-pin |
Sterowniki wideo: | H.265/H.265+/H.264/H.264+/MPEG4 |
Złącza audio RCA: | 1 |
Wyjścia audio RCA: | 1 |
Przepustowość pamięci: | 192 GB/s |
Technologia chłodzenia: | GIGABYTE WINDFORCE 2X |
Obsługiwane rozdzielczości: | 3840 x 2160, 1920 x 1080, 1280 x 1024, 1280 x 720, 1024 x 768 |
Przepustowość wejściowa: | 80 Mbit/s |
Przepustowość wyjściowa: | 80 Mbit/s |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Gigabyte GeForce GTX 1060 WINDFORCE 6G, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje karta graficzna Gigabyte

6 Października 2024

5 Października 2024

5 Października 2024

Gigabyte AORUS GeForce RTX 4080 SUPER XTREME ICE 16G Instrukcja
5 Października 2024
4 Października 2024

3 Października 2024

3 Października 2024

3 Października 2024

3 Października 2024

Gigabyte AORUS GeForce RTX 4070 Ti SUPER MASTER 16G Instrukcja
3 Października 2024Instrukcje karta graficzna
- karta graficzna StarTech.com
- karta graficzna Asus
- karta graficzna MSI
- karta graficzna HP
- karta graficzna Dell
- karta graficzna Datapath
- karta graficzna Iogear
- karta graficzna Biostar
- karta graficzna CLUB3D
- karta graficzna Asrock
- karta graficzna Barco
- karta graficzna ECS
- karta graficzna Elgato
- karta graficzna Zotac
- karta graficzna Matrox
- karta graficzna Nvidia
- karta graficzna Foxconn
- karta graficzna HIS
- karta graficzna Peak
- karta graficzna PNY
- karta graficzna Arduino
- karta graficzna AMD
Najnowsze instrukcje dla karta graficzna

13 Marca 2025

27 Lutego 2025

30 Grudnia 2025

29 Grudnia 2024

29 Grudnia 2024

28 Grudnia 2024

16 Grudnia 2024

16 Grudnia 2024

16 Grudnia 2024

16 Grudnia 2024