Instrukcja obsługi Getac E100

Getac tabletka E100

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Getac E100 (141 stron) w kategorii tabletka. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/141

E100

User’s Manual

(October 2007)

TRADEMARKS

The Bluetooth® word mark and logos are registered trademarks owned by

Bluetooth SIG, Inc.

All other brand and product names are trademarks or registered trademarks of

their respective owners.

NOTE

The information in this manual is subject to change without notice.

Table of Contents

Preface .....................................................................................vi

Chapter 1 Getting Started...................................................1-1

Getting the Tablet PC Running ............................................ 1-2

Unpacking ........................................................................ 1-2

Connecting to AC Power ................................................. 1-2

Turning On and Off the Tablet PC................................... 1-5

Taking a Look at the Tablet PC ........................................... 1-7

Right-Side Components ................................................... 1-7

Left-Side Components ..................................................... 1-8

Rear Components............................................................. 1-9

Front Components.......................................................... 1-10

Bottom Components....................................................... 1-11

Top Components............................................................ 1-12

Where to Go from Here...................................................... 1-14

Chapter 2 Operating Your Tablet PC .................................2-1

Starting and Stopping the Tablet PC .................................... 2-2

Starting the Tablet PC ...................................................... 2-2

Stopping the Tablet PC .................................................... 2-2

Using the Quick Buttons ...................................................... 2-4

Using the Keypad................................................................. 2-5

Numeric Keypad .............................................................. 2-5

Cursor-Control Keys........................................................ 2-6

Using the On-screen Keyboard ............................................ 2-7

Using the Touchscreen (depending on your model) ............ 2-8

Using the Active Digitizer Feature

(depending on your model) ................................................ 2-10

Using the Video Features ................................................... 2-12

Configuring the Display Modes ..................................... 2-12

Using the Audio Features................................................... 2-13

Connecting Audio Devices ............................................ 2-14

Using the Communication Features ................................... 2-15

Using the LAN............................................................... 2-15

Using the Wireless LAN ................................................ 2-15

Using the Bluetooth® Wireless Feature (Optional) ........ 2-18

Using the GPS (Optional) .............................................. 2-21

Using the 3G Feature (Optional).................................... 2-22

Chapter 3 Managing Power ................................................3-1

AC Adapter .......................................................................... 3-2

Battery Pack ......................................................................... 3-3

Charging the Battery Pack ............................................... 3-3

Initializing the Battery Pack............................................. 3-4

Checking the Battery Level.............................................. 3-4

Replacing the Battery Pack .............................................. 3-5

Battery Low Signals and Actions..................................... 3-7

Power Management.............................................................. 3-8

Hibernation....................................................................... 3-9

Power-Saving Tips............................................................. 3-10

Chapter 4 Expanding Your Tablet PC................................4-1

Connecting a USB Device.................................................... 4-2

Using Smart Cards ............................................................... 4-3

Inserting and Removing a Smart Card ............................. 4-3

Using PC Cards (depending on your model)........................ 4-4

Inserting and Removing a PC Card.................................. 4-4

Using ExpressCards (depending on your model)................. 4-6

ExpressCard Type ............................................................ 4-6

Inserting and Removing an ExpressCard ......................... 4-7

Using the Docking Station ................................................... 4-8

iii

Chapter 5 Using BIOS Setup and

System Recovery Feature .................................5-1

When and How to Use BIOS Setup ..................................... 5-2

When to Use..................................................................... 5-2

Starting BIOS Setup......................................................... 5-2

Moving Around and Making Selections .......................... 5-4

Information Menu ................................................................ 5-5

Main Menu........................................................................... 5-6

Advanced Menu ................................................................... 5-7

Security Menu ...................................................................... 5-8

Boot Menu............................................................................ 5-9

Exit Menu........................................................................... 5-10

When and How to Use the System Recovery Feature........ 5-11

When to Use................................................................... 5-11

Starting System Recovery .............................................. 5-11

Chapter 6 Using the TPM, EasyTap,

and G-Manager Utilities.....................................6-1

Using TPM (Trusted Platform Module)............................... 6-2

Using the EasyTap Utility .................................................... 6-3

Quick Button Setup Utility............................................... 6-8

Using the G-Manager Utility.............................................. 6-13

Starting G-Manager........................................................ 6-13

System Tab..................................................................... 6-15

Battery Tab..................................................................... 6-16

Light Sensor ................................................................... 6-19

ECO Tab......................................................................... 6-20

Ignition Tab.................................................................... 6-22

Monitoring Tab .............................................................. 6-23

Antenna Tab................................................................... 6-26

GPS Status Tab .............................................................. 6-27

Chapter 7 Caring for the Tablet PC....................................7-1

Protecting the Tablet PC ...................................................... 7-2

Using the Cable Lock....................................................... 7-2

Taking Care of the Tablet PC............................................... 7-3

Location Guidelines ......................................................... 7-3

General Guidelines........................................................... 7-3

Cleaning Guidelines......................................................... 7-4

Battery Pack Guidelines ................................................... 7-4

Touchscreen Guidelines................................................... 7-5

When Traveling.................................................................... 7-7

Chapter 8 Troubleshooting.................................................8-1

Preliminary Checklist........................................................... 8-2

Solving Common Problems.................................................. 8-3

Battery Problems.............................................................. 8-4

Bluetooth Wireless Transmission Problems..................... 8-4

Display Problems ............................................................. 8-5

ExpressCard Problems ..................................................... 8-5

Hardware Device Problems.............................................. 8-5

Hard Disk Drive Problems ............................................... 8-6

LAN Problems ................................................................. 8-6

Wireless LAN Problems................................................... 8-7

PC Card Problems............................................................ 8-8

Power Management Problems.......................................... 8-9

Software Problems ........................................................... 8-9

Sound Problems ............................................................. 8-10

Startup Problems............................................................ 8-10

Other Problems............................................................... 8-11

Resetting the Tablet PC...................................................... 8-12

Appendix A Specifications ................................................... A-1

Appendix B Regulatory Information .................................... B-1

On the Use of the System.....................................................B-2

Class B Regulations .........................................................B-2

Safety Notices ..................................................................B-3

On the Use of the RF Device................................................B-6

USA and Canada Safety Requirements and Notices........B-6

European Union CE Marking and Compliance Notices ..B-8

电子信息产品有毒有害物质或元素名称及含量标示

电子信息产品有毒有害物质或元素名称及含量标示电子信息产品有毒有害物质或元素名称及含量标示....B-12

Preface

This manual contains information that will help you operate the tablet PC.

It is divided into 8 chapters and 2 appendices.

z Chapter 1, Getting Started, takes you through the process of setting

up the tablet PC and identifying its external components.

z Chapter 2, Operating Your Tablet PC, tells you how to use the

tablet PC’s components and features.

z Chapter 3, Managing Power, provides information on power.

z Chapter 4, Expanding Your Tablet PC, provides information on

installing and using peripheral devices.

z Chapter 5, Using BIOS Setup and System Recovery Feature,

describes the BIOS Setup program that configures the tablet PC’s

BIOS settings as well as the System Recovery function.

z Chapter 6, Using the TPM, EasyTap, and G-Manager Utilities,

describes how to use TPM (Trusted Platform Module), EasyTap, and

G-Manager utilities.

z Chapter 7, , gives you tips in care and Caring for the Tablet PC

maintenance.

z Chapter 8, Troubleshooting, gives solutions to common problems

you may encounter when using the tablet PC.

z Appendix A, Specifications, gives a brief specification of the tablet

PC.

z Appendix B, Regulatory Information, provides regulatory

statements and safety notices on your tablet PC.

vii

Notational Conventions

Throughout this manual, the following conventions are used to

distinguish elements of text.

NOTE: identifies additional information that requires special attention.

CAUTION: identifies important information that, if not followed, may result in loss of

data or damage to the tablet PC.

Keypad keys are shown in a bold typeset. For example:

Press the Ent key to complete.

A title, command, setup item, or button that you can see on the screen is

shown in boldface. A value or an option that you can select for a setup

item is shown in italic. For example:

Select When I press the power button, set it to Shut down, and

then click the Save changes button.

Getting Started 1-1

Getting Started

Congratulations on purchasing this rugged tablet PC.

This chapter first tells you step by step how to get the tablet PC up and

running. You will find instructions for these procedures:

z Unpacking

z Connecting to AC power

z Turning on the tablet PC

z Turning off the tablet PC

Then, you will find a section briefly introducing the external components

of the tablet PC. And the last section navigates you to the information you

may need after the tablet PC is ready for use.

CHAPTER

Getting Started 1-2

Getting the Tablet PC Running

This section guides you through the procedures for getting the tablet PC

ready for operation.

Unpacking

After unpacking the shipping carton, you should find these standard

items:

z Tablet PC

z Accessories:

− AC adapter

− AC power cord

− Touchscreen pen (depending on your model)

− Digitizer pen (depending on your model)

Inspect all the items. If any item is damaged or missing, notify your dealer

immediately.

Keep the shipping carton and packing materials in case you need to ship

or store the tablet PC in the future.

Connecting to AC Power

The tablet PC operates either on the external AC power or internal battery

power. It is suggested that you use AC power when you start up the tablet

PC for the very first time.

CAUTION: Use only the AC adapter included with your tablet PC. Using other AC

adapters may damage the tablet PC.

1. Make sure that the tablet PC is turned off.

2. Place the tablet PC upside down.

Getting Started 1-3

3. Remove the four screws securing the battery compartment cover and

remove it.

4. Fit the battery pack into place (n) and secure with two screws (o).

5. Replace the battery compartment cover and secure with four screws.

6. Plug the DC cord of the AC adapter to the power connector ( ) of

the tablet PC (n).

Getting Started 1-4

7. Plug the female end of the AC power cord to the AC adapter and the

male end to an electrical outlet (

o).

8. Power is being supplied from the electrical outlet to the AC adapter

and onto your tablet PC. Now, you are ready to turn on the tablet PC.

9. When the AC adapter is connected, it also charges the battery pack.

The Battery Charge Indicator ( ) on the tablet PC glows amber to

indicate that charging is in progress. When the battery is fully

charged, the Battery Charge Indicator glows green. (For information

on using battery power, see Chapter 3.)

CAUTION:

z When you disconnect the AC adapter, disconnect from the electrical outlet first and

then from the tablet PC. A reverse procedure may damage the AC adapter or the

tablet PC.

z When unplugging the connector, always hold the plug head. Never pull on the cord.

Getting Started 1-5

Turning On and Off the Tablet PC

Turning On

1. Place your tablet PC on a flat and stable surface or, the tablet PC can

be operated while holding it as shown.

2. Make sure that the tablet PC is either connected to AC power or the

battery has power.

3. Press the power button ( ).

Getting Started 1-6

4. Each time the tablet PC is turned on, it performs a Power-On Self

Test (POST), and the operating system Windows XP Tablet PC

edition should start (may support Windows Vista Business and

Ultimate in the future).

Turning Off

To turn off the tablet PC power, use the “Shut Down” command of your

operating system.

NOTE: There are other ways you can stop the tablet PC so that you will be back to

where you left off when you next turn on the tablet PC. (See “Stopping the Computer” in

Chapter 2 for information.)

CAUTION: If you have to turn the tablet PC on again immediately after turning it off,

wait for at least five seconds. Turning the tablet PC off and on rapidly can damage it.

Getting Started 1-7

Taking a Look at the Tablet PC

This section identifies the external components of the tablet PC and

briefly describes the function of each component.

NOTE: Depending on the model you purchased, the appearance of your tablet PC may

not be exactly the same as those shown in this manual.

Right-Side Components

Ref Component Description See Also

n Kensington Lock

Locks the tablet PC to a stationary object for

security.

P. 7-2

o Touchscreen Pen /

Digitizer Pen

(depending on your

model)

Provides a convenient way to use the

touchscreen.

P. 2-8,

2-10

p Tether Hole Touchscreen pen tethered to this hole.

Getting Started 1-8

Left-Side Components

Ref Component Description See Also

n RJ-45 Connector

Connects the LAN cable. P. 2-15

o USB Ports Each of the two ports connects a USB device,

such as a USB flash disk, printer, digital

camera, joystick, and more.

P. 4-2

Getting Started 1-9

Rear Components

Ref Component Description See Also

n Smart Card

Reader

Accepts a smart card for additional security

feature.

P. 4-3

o PCMCIA Slot /

ExpressCard Slot

(depending on

your model)

Accepts a PC card or an ExpressCard/34 /

ExpressCard/54 for additional functions.

P. 4-4, 4-6

p Audio Output

Connector

Connects a set of headphones, external

speakers with amplifier, or an audio recording

device.

P. 2-14

Getting Started 1-10

Front Components

Ref Component Description See Also

n 3G Antenna

pass-through

Connector

(option)

Connects to the optional antenna for wireless

WAN (wide area network) 3G transmission.

P. 2-22

o GPS Antenna

pass-through

Connector

(option)

Connects to the optional antenna for GPS

receiver.

P. 2-21

p Docking

Connector

Connects to a docking station. P. 4-8

q Power Connector

Connects the AC adapter. P. 1-2

Getting Started 1-11

Bottom Components

Ref Component Description See Also

n Battery Pack /

3G SIM Card Slot

Compartment

Inside is the battery pack that supplies

power to your tablet PC when external

power is not connected.

Also contains the 3G SIM card slot.

P. 3-5

P. 2-22

Getting Started 1-12

Top Components

Ref Component Description See Also

n LCD

Touchscreen

Displays and receives information for the

tablet PC.

P. 2-12

o Power Button Turns the tablet PC power ON and OFF.

The LED lights green when tablet PC is on.

P. 1-5

p Light Sensor Adjusts the LCD brightness automatically

based on your tablet PC’s surrounding

lighting condition.

Quick Buttons

Fn Toggles the Fn keylock ON and OFF. P. 2-4

Toggles the keypad lock ON and OFF by

pressing for three seconds to prevent

accidental pressing of keypad during

transport.

P. 2-4

Menu Toggles the “EasyTap” utility ON and OFF. P. 2-4

Getting Started 1-13

Ref Component Description See Also

Indicators Show the current status of the tablet PC’s

devices.

Lights green when WLAN is on.

WLAN/WWAN

Lights amber when WWAN is on.

P. 2-16

Lights green when the battery is fully charged.

Lights amber when the battery is being

charged.

Battery Charge

Blinks red when the battery’s capacity is

below 10 %.

P. 3-3

Lights green when hard disk drive is in use.

Hard Disk Drive /

Heater (option)

Lights red when optional heater is on

(temperature is lower than 5

oC when booting

your tablet PC).

s Numeric Keypad Facilitates entering of numbers, also includes

the Del (Delete) and Ent (Enter) keys. When

Fn keylock is on, the alternative function of a

key is activated. The alternative functions are

identified by the color of blue on the keytop.

P. 2-5

t Cursor-control

Keys

Serves as the UP / DOWN / LEFT / RIGHT

arrow keys (except pointer on screen). When

Fn keylock is on, the alternative function of a

key is activated. The alternative functions are

identified by the color of blue on the keytop.

P. 2-5

u Speaker Sends out sound and voice from your tablet

PC.

P. 2-13

Getting Started 1-14

Where to Go from Here

As your tablet PC is ready for operation, you may want to do any of the

following now:

For this purpose... Do this...

To know more about the tablet PC... Go on to the next chapter.

To install the operating system if your

dealer has not already done so...

See the operating system manual.

To know more about the operating

system...

Read the operating system manual.

To set a power-on password... Read the operating system manual.

To charge the battery pack for the first

time...

See “Charging the Battery Pack” in

Chapter 3.

Operating Your 2-1

Operating Your Tablet PC

This chapter provides information about the use of the tablet PC.

If you are new to computers, reading this chapter will help you learn the

operating basics. If you are already a computer user but are new to tablet

PCs, you may choose to read only the parts containing information

unique to your tablet PC.

Described in this chapter are the operating basics of these components/

features:

z Starting and stopping the tablet PC

z Quick buttons

z Keypad

z Touchscreen (depending on your model)

z Active Digitizer (depending on your model)

z Video features

z Audio features

z Communication features

CHAPTER

Operating Your 2-2

Starting and Stopping the Tablet PC

There are a number of ways to start and stop the tablet PC.

Starting the Tablet PC

You always start the tablet PC using the power button ( ).

A computer starts up with an operating system (OS) existing on the

storage device such as the hard disk. The computer will automatically

load the OS after you turn it on. This process is called booting.

NOTE: An operating system is the platform for all your software application programs to

run on. Your computer uses the Microsoft Windows XP Tablet PC edition operating

system.

Stopping the Tablet PC

When you finish a working session, you can stop the tablet PC by turning

off the power or leaving the tablet PC in Standby or Hibernation mode:

To stop in

this mode...

Do this... To start up or

resume again

Off Follow the shutdown procedure of your

operating system. This can prevent loss

of unsaved data or damage to your

software programs.

If the system is locked up because of

hardware or software problems, press the

power button to turn off the tablet PC.

Press the power

button.

Standby Depending on your settings in Windows,

you can place the tablet PC in Standby

mode by pressing the power button.

Press the power

button.

Hibernation Depending on your settings in Windows,

you can place the tablet PC in

Hibernation mode by pressing the power

button.

Press the power

button.

Operating Your 2-3

If you choose to stop in Standby or Hibernation mode, you can return to

where you left off the next time you start up the tablet PC. (See “Power

Management” in Chapter 3 for more information.)

Operating Your 2-4

Using the Quick Buttons

Located on top of the keypad are three quick buttons:

z Fn Fn button toggles the keylock ON and OFF ( icon appears on

the system tray when ON). You can use the secondary functions of

keypad buttons with blue color on top of each button (as described in

the next section).

z button toggles the keypad lock ON and OFF. Press the button to

turn on or press continuously for more than three seconds to turn off.

This would prevent accidental pressing of the keypad buttons during

transport.

z Menu button toggles the EasyTap utility ON and OFF. Upon pressing

it the following screen appears (see chapter 6 for more details).

Operating Your 2-5

Using the Keypad

Your keypad can be divided into two major categories:

z Numeric, Delete (Del), and Enter (Ent) keys

z Cursor-control keys

NOTE: To use the keypad during poor lighting conditions, turn the keypad backlight ON

by pressing the Fn button, then press the “8” ( ) button.

Numeric Keypad

The 12-key numeric keypad with Delete and Enter keys is shown next:

When the Fn keylock is ON ( icon appears on the system tray), you

can use the following secondary functions with blue color on top of each

button.

– switches between landscape and portrait LCD display.

– switches the keypad backlight ON and OFF.

– switches the touchscreen or active digitizer OFF and ON.

Operating Your 2-6

– switches the sunlight-readable mode ON and OFF.

– serves as the mouse right-click button.

– C+A+D serves as the Ctrl+ +Alt Del key.

– ESC serves as the Escape button.

Cursor-Control Keys

The word “cursor” refers to the indicator on the screen (except for pointer

on screen) that lets you know exactly where on your screen anything you

type will appear. It can take the form of a vertical or horizontal line, a

block, or one of many other shapes.

When the Fn keylock is ON ( icon appears on the system tray), you

can use the following secondary functions with blue color on top of each

button.

– increase the sound volume of your tablet PC.

– decrease the sound volume of your tablet PC.

– increase the brightness of LCD display.

– decrease the brightness of LCD display.

Operating Your 2-7

Using the On-screen Keyboard

Use the on-screen keyboard to enter text and perform various keyboard

functions.

1. Click the on-screen keyboard icon ( ) located on the Windows

system tray and the software keyboard will appear onscreen.

2. Tap the characters on the on-screen keyboard with the touchscreen /

digitizer pen.

NOTE: To protect the LCD display, use the touchscreen or digitizer pen on your

touchscreen.

Operating Your 2-8

Using the Touchscreen (depending on your

model)

NOTE:

z Your tablet PC comes with either the touchscreen function or the Active Digitizer

feature.

z The touchscreen function is not available when running the BIOS Setup program.

CAUTION: Do not use a sharp object such as a ballpoint pen or pencil on the

touchscreen. Doing so may damage the touchscreen surface. Use the included

touchscreen pen.

The touchscreen is a touch-sensitive device that allows you to easily

communicate with the tablet PC by controlling the location of the pointer

on the screen.

Here are some common terms that you should know when using the

touchscreen:

Term Action

Click/Point Tap gently on the touchscreen.

Double-click Tap twice on the touchscreen rapidly.

Right-click Press lightly on the display until a pop-up menu appears,

then select the desired function.

Operating Your 2-9

Term Action

Drag and

drop

Press lightly on the touchscreen and move your finger

until you reach your destination (drag). Finally, release

your finger (drop) when you finish dragging your

selection to the destination. The object will drop into the

new location.

Operating Your 2-10

Using the Active Digitizer Feature (depending

on your model)

NOTE:

z Your tablet PC comes with either the Active Digitizer feature or the touchscreen

function.

z The Active Digitizer feature is not available when running the BIOS Setup program.

The active digitizer feature allows you to easily communicate with the

tablet PC by using the optional digitizer pen.

WARNING: To protect the LCD screen with active digitizer feature, do not use force

when pressing on the surface (greater than 1 kg and more than 30 seconds at a time).

Here are some common terms that you should know when using the

active digitizer feature:

Term Action

Move Move the cursor pointed by the digitizer

pen.

Operating Your 2-11

Term Action

Click/Point Tap gently on the display.

Right-click Press lightly on the display until a

pop-up menu appears, then select the

desired function.

Double-click Tap twice on the display rapidly.

Drag and

drop

Press lightly on the display and move

your digitizer pen until you reach your

destination (drag). Finally, release your

digitizer pen (drop) when you finish

dragging your selection to the

destination. The object will drop into the

new location.

Erase Press and hold down the digitizer pen

button, then move the cursor pointed by

the digitizer pen to erase.

CAUTION: The active digitizer feature cannot be used in the BIOS Setup program or

when using the full screen in DOS mode.

NOTE:

z You can move the cursor by bringing the digitizer pen close to the screen, without

actually touching the screen’s surface.

z Do not move the digitizer pen too quickly. If the pen moves too quickly, the cursor

may be unable to follow its movement.

z If you cannot click on the edge of the screen, hold the digitizer pen perpendicular to

the display and try clicking again.

Operating Your 2-12

Using the Video Features

The video subsystem of your tablet PC features:

z 8.4-inch wide TFT (Thin-Film Transistor) color LCD with SVGA

transmissive display

z Toggle display between landscape view and portrait view using the

LCD rotate button

z Built-in light sensor to automatically adjust the LCD brightness

z Manually adjust the display brightness using the LCD brightness up

( ) and down ( ) buttons

z Power Management

z Sunlight-readable LCD display using the sunlight-readable mode

button (option)

Conguring the Display Modes

Your tablet PC has been set to a default resolution and number of colors

before shipment. You can view and change display settings through your

operating system. See your operating system documentation or online

help for specific information.

Operating Your 2-13

Using the Audio Features

The audio subsystem of your tablet PC features:

z High density audio codec

z Manually adjust the sound volume using the sound volume up ( )

and down ( ) buttons

z Audio-out connector ( ) (n) and

z Integrated speaker (o)

Ways of playing and recording sound vary with the operating system

used. See your operating system documentation or online help for

specific information.

Operating Your 2-14

Connecting Audio Devices

For higher audio quality, you can send sound through external audio

devices such as speakers, headphones, or earphone set using the audio-out

connector.

NOTE:

z After connecting an external audio device, make sure that you specify the use of the

correct audio device in Windows.

z When using the external speakers/headphones, you cannot use the internal one.

Operating Your 2-15

Using the Communication Features

Using the LAN

The internal 10/100/1000Base-T LAN (Local Area Network) module

allows you to connect your tablet PC to a network. It supports data

transfer rate up to 1000 Mbps.

To connect the network cable to the LAN module, connect one end of the

LAN cable to the RJ-45 connector ( ) on the tablet PC and the other

end to the network hub.

Using the Wireless LAN

The WLAN features include:

z Peer-to-Peer (Ad-Hoc) and Access Point (Infrastructure) modes

support

z WEP (Wired Equivalent Privacy) 64/128-bit data encryption

z IEEE 802.11b/g standard compliance

Technology 802.11b 802.11g

Stated Maximum

Throughput (Mbps)

11 54

Data Rates (Mbps) 11, 5.5, 2, 1 54, 36, 18, 9

Band (GHz) 2.412 ~ 2.462 2.4

Modulation Technology DSSS (Direct Sequence

Spread Spectrum)

OFDM (Orthogonal Frequency

Division Multiplexing)

Operating Your 2-16

NOTE: 802.11g mode is backward compatible with 802.11b mode.

Turning Off/On the WLAN Radio

NOTE: The FAA (Federal Aviation Agency) has deemed it unsafe to operate wireless

devices in aircraft as this may interfere with flight safety. Remember to turn off wireless

LAN when using your tablet PC in the airplane.

1. Press the Menu button to start up the EasyTap utility.

2. Click the RF button to switch the WLAN radio on/off, indicated by

the WLAN indicator ( ) glowing in green when on.

If you need to temporarily turn off the radio, click the RF button. To

resume network connection, click the RF button again. Upon restarting

your system, wireless LAN radio would be on even if you turned it off

before system shutdown.

It takes approximately 30 seconds for your tablet PC to make a successful

WLAN connection and approximately 10 seconds to disconnect.

Operating Your 2-17

Connecting to a Wireless Network

To connect to a wireless network:

1. Make sure that the wireless LAN radio is “on” indicated by the

wireless LAN indicator ( ) glowing in green.

2. Double-click the Wireless Network Connection icon located on

your Windows system tray. If any wireless network is detected, the

following window appears on screen.

3. Click to select a wireless network to connect to, and then click

Connect.

4. Depending on the settings, you may be asked to enter a WEP key

(refer to your Windows online help for more information on setting a

wireless network connection).

Operating Your 2-18

Using the Bluetooth

Wireless Feature (Optional)

Depending on your model, your tablet PC may incorporate the Bluetooth

capability for short-range (about 10 meters) wireless communications

between devices without requiring a cable connection.

With Bluetooth, data can be transmitted through walls, pockets and

briefcases as long as two devices are within range. By default, your tablet

PC’s Bluetooth feature is active (always ON) upon booting your tablet PC

and is in the general discoverable and pairable mode.

The status of the Bluetooth connection is indicated by the Bluetooth icon

located in the system tray in the lower-right part of the screen.

Status Icon

® (blue with white logo).

Connected

(blue with green logo)

You can use the Bluetooth Utility to configure Bluetooth connection

settings and transfer files.

Connecting to Another Bluetooth Device

1. Make sure that the target Bluetooth device is turned on, discoverable

and within close range. (See the documentation that came with the

Bluetooth device.)

2. Right-click (press lightly until a pop-up menu appears) the icon,

and then click Add New Connection.

Operating Your 2-19

3. The Add New Connection Wizard window appears. Select Express

Mode (Recommended), and then click Next.

4. Select the device to connect to and click Next.

Operating Your 2-20

5. Depending on the type of Bluetooth device that you want to connect

to, you will need to enter the pertinent information.

Sending a File

1. Make sure that the target Bluetooth device is turned on, discoverable

and within close range. (See the documentation that came with the

Bluetooth device.)

2. Right-click the icon, and then click Wireless File Transfer.

3. In the Wireless File Transfer window, click Add to browse for the file

to send.

Operating Your 2-21

4. Click the target device from the list, and then click Send to start the

transfer procedure.

Using the GPS (Optional)

Depending on the model you purchased, your tablet PC may have the

GPS receiver module built in.

GPS (Global Positioning System) is a constellation of 24 well-spaced

satellites that orbit the Earth and make it possible for devices enabled with

GPS receivers to pinpoint their location.

You need to install third-party GPS navigation software to take advantage

of the GPS feature.

Operating Your 2-22

Refer to chapter 6 on using the GPS feature.

Using the 3G Feature (Optional)

3G is the third generation of mobile phone standards and technology,

after 2G. It is based on the International Telecommunication Union (ITU)

family of standards under the International Mobile Telecommunications

programme, “IMT-2000”. Services include wide-area wireless voice

telephony and broadband wireless data, all in a mobile environment.

Unlike IEEE 802.11 networks, 3G networks are wide area cellular

telephone networks which evolved to incorporate high-speed internet

access and video telephony. IEEE 802.11 networks are short range,

high-bandwidth networks primarily developed for data.

To use the 3G feature on your computer, you need to subscribe to 3G

service and install the 3G SIM card from your service provider, network

operator, or other vendor.

To install the SIM card, follow these steps:

1. Make sure that the tablet PC is not turned on or connected to AC

power.

2. Place the tablet PC upside down.

Operating Your 2-23

3. Remove the four screws securing the battery compartment cover and

remove it.

4. Remove the two screws securing the battery pack to the battery

compartment (n) and, pull on the ribbon strip to lift the battery pack

off the computer (o).

Operating Your 2-24

5. Locate the SIM card slot and push the SIM card into the slot. Make

sure the beveled corner on the SIM card is facing towards the tablet

PC and that the golden contact area on the card is facing downwards.

To remove the SIM card, just push in (n) the SIM card to pop-out

(o) and remove the card.

Operating Your 2-25

6. Fit the battery pack into place and secure with two screws.

7. Replace the battery compartment cover and secure with four screws.

WARNING: Keep all SIM cards out of the reach of small children. For availability and

information on using SIM card services, contact your SIM card vendor. This may be the

service provider, network operator, or other vendor.

Managing Power 3-1

Managing Power

Your tablet PC operates either on external AC power or on internal

battery power.

This chapter tells you how you can effectively manage power. To

maintain optimal battery performance, it is important that you use the

battery in the proper way.

The topics in this chapter include:

z What is an AC adapter

z How to charge the battery pack

z When and how to initialize the battery pack

z How to check the battery level

z How to replace the battery pack

z What happens when the battery is low and what actions to take

z What is Power Management

z How to save power

CHAPTER

Managing Power 3-2

AC Adapter

CAUTION:

z The AC adapter is designed for use with your tablet PC only. Connecting the AC

adapter to another device can damage the adapter.

z The AC power cord supplied with your tablet PC is for use in the country where you

purchased your tablet PC. If you plan to go overseas with the tablet PC, consult

your dealer for the appropriate power cord.

z When you disconnect the AC adapter, disconnect from the electrical outlet first and

then from the tablet PC. A reverse procedure may damage the AC adapter or tablet

PC.

z When unplugging the connector, always hold the plug head. Never pull on the cord.

The AC adapter serves as a converter from AC (Alternating Current) to

DC (Direct Current) power because your tablet PC runs on DC power, but

an electrical outlet usually provides AC power. It also charges the battery

pack when connected to AC power.

The adapter operates on any voltage in the range of 100~240 V AC.

Managing Power 3-3

Battery Pack

The battery pack is the internal power source for the tablet PC. It is

rechargeable using the AC adapter.

The operating time of a fully charged battery pack depends on how you

are using the tablet PC. When your applications often access peripherals,

you will experience a shorter operating time.

NOTE: Care and maintenance information for the battery is provided in the “Battery

Pack Guidelines” section in Chapter 7.

Charging the Battery Pack

NOTE:

z Charging will not start if the battery’s temperature is below 0 ° °C (32 F). It is also

recommended not to charge the battery when temperature is above 45 °C (113 °F).

z To prevent damage, the charging process may stop and the Battery Charge

Indicator flashes red when the environmental temperature gets above

55 °C (131 °F).

z During charging, do not disconnect the AC adapter before the battery has been fully

charged; otherwise you will get a prematurely charged battery.

To charge the battery pack, connect the AC adapter to the tablet PC and

an electrical outlet. The Battery Charge Indicator ( ) on the tablet PC

glows amber to indicate that charging is in progress. You are advised to

keep the tablet PC power off while the battery is being charged. When the

battery is fully charged, the Battery Charge Indicator glows green.

It takes approximately 3 hours to fully charge the Li-Ion battery pack at a

room temperature of 25 °C (may need a longer charging time at lower

temperatures).

CAUTION: After the tablet PC has been fully recharged, do not immediately disconnect

and reconnect the AC adapter to charge it again. Doing so may damage the battery.

NOTE: The battery level may automatically lessen due to the self-discharge process

(0.21 % per day), even when the battery pack is fully charged (100 %). This happens no

matter if the battery pack is installed in the tablet PC.

Managing Power 3-4

Initializing the Battery Pack

You need to initialize a new battery pack before using it for the first time

or when the actual operating time of a battery pack is much less than

expected.

Initializing is the process of fully charging, discharging, and then

charging. It can take several hours.

1. Make sure that the tablet PC power is turned off. Connect the AC

adapter to fully charge the battery pack.

2. After the battery pack is fully charged, turn on the tablet PC. Press the

Ent key when the prompt appears on the screen during system startup.

The prompt shows up on the screen for only a few seconds. You must

press the Ent key quickly.

3. A small window appears, select Launch System Setup to invoke the

program.

4. Disconnect the AC adapter and leave the tablet PC on until the battery

is fully discharged. The tablet PC will shut down automatically.

5. Connect the AC adapter to fully charge the battery pack.

Checking the Battery Level

NOTE: Any battery level indication is an estimated result. The actual operating time can

be different from the estimated time, depending on how you are using the tablet PC.

By Operating System

You can check the approximate battery level using the battery meter

function of the operating system. To read the battery level in Windows,

click the icon on the taskbar. (Click the icon if the tablet PC is

using AC power.)

Managing Power 3-5

By Gas Gauge

On the exterior side of the battery pack is a gas gauge for displaying the

estimated battery charge. When the battery pack is not installed in the

tablet PC and you want to know the battery charge, you can press the

switch with a pointed device to see the corresponding value of indicator

segment that light green. The value of the corresponding green segment

indicates the relative percentage of the battery charge. The battery pack is

fully discharged when you see no segment glowing green.

Replacing the Battery Pack

CAUTION:

z There is danger of explosion if the battery is incorrectly replaced. Replace the

battery only with the tablet PC manufacturer’s optional battery packs. Discard used

batteries according to the dealer’s instructions.

z Do not attempt to disassemble the battery pack.

If you often rely on battery power for a long period of time while

traveling, you may consider the purchase of an additional battery pack

from your dealer and keep it with you in a fully charged state as a backup.

To replace the battery pack, follow these steps:

1. Make sure that the tablet PC is not turned on or connected to AC

power.

2. Place the tablet PC upside down.

Switch

Managing Power 3-6

3. Remove the four screws securing the battery compartment cover and

remove it.

4. Remove the two screws securing the battery pack to the battery

compartment (n) and, pull on the ribbon strip to lift the battery pack

off the tablet PC (o).

Managing Power 3-7

5. Fit another battery pack into place and secure with two screws.

6. Replace the battery compartment cover and secure with four screws.

Battery Low Signals and Actions

Battery Low occurs when the battery has approximately 10 % (Windows

default setting) of its charge remaining. The tablet PC’s Battery Charge

Indicator ( ) blinks red to alert you to take actions.

NOTE: You can set up your threshold and signals of Battery Low under Windows.

Immediately save your data upon Battery Low. The remaining operating

time depends on how you are using the tablet PC. If you are using the

audio subsystem, PC card, hard or USB flash disk, the battery might run

out of charge very quickly.

Always respond to Battery Low by placing your tablet PC on the Standby

or Hibernation mode, turning off the tablet PC, or connecting the AC

adapter.

If you do not take any action, the tablet PC will automatically hibernate

and turn off.

CAUTION:

z If you are using a PC card, do not access the card during battery low periods. This

is because the access may take longer than the time it takes the battery to run out

of charge, thus making your access to the card unsuccessful.

z If you fail to save your data when the battery completely runs out of charge, then

you lose your data.

Managing Power 3-8

Power Management

Your tablet PC supports ACPI (Advanced Configuration and Power

Interface) for power management. The power management feature allows

you to reduce the power consumption for energy saving.

With an ACPI-compliant operating system such as Windows XP, power

supply to different tablet PC components is controlled on an as-needed

basis. This allows maximum power conservation and performance at the

same time.

In general, Windows’ power management works in this way:

What... When...

Power to the hard disk is turned off When the hard disk has been idle for a

set period.

Power to the display is turned off When the display has been idle for a

set period.

When the entire system has been idle

for a set period.

The tablet PC enters the Standby

mode. The hard disk and display are

turned off and the entire system

consumes less power. When you press the power button. *

When the entire system has been idle

for a set period

The tablet PC enters the Hibernation

mode. (See the next subsection for

more information.) When you press the power button. *

* Depends on your settings in Windows.

For detailed information on power management, see Windows’ Help.

Managing Power 3-9

Hibernation

NOTE: Make sure that the hibernation feature is enabled in the Hibernate tab of the

Power Options Properties from the Control Panel in Windows XP.

Hibernation is a very useful feature. People frequently open many

applications when they use computers. It takes some time to get all these

applications open and running, and normally they all have to be closed

before the computer can be turned off.

When you use the hibernation feature, you do not have to close the

applications. The tablet PC stores the state of your tablet PC to a file on

the hard disk and then shuts down. The next time you turn on your tablet

PC, you return to exactly where you left off.

Managing Power 3-10

Power-Saving Tips

Aside from enabling your tablet PC’s power saving mode (see previous

section), you can do your part to maximize the battery’s operating time by

following these suggestions.

z Do not disable Power Management.

z Decrease the LCD brightness to the lowest comfortable level.

z Shorten the length of time before Windows turn off the display.

z Many USB devices use power just by being connected. If you use a

USB mouse, you can save power by disconnecting the mouse and

using the optional touchscreen pen. If you use a USB flash drive,

unplug it when you are not using it.

z If you work with an application that uses a PC card, exit the

application when you finish using it.

z If you have a PC card installed, remove it when not in use. Some PC

cards drain power even while they are inactive.

z Deactivate the Wireless LAN function if you are not using it

(see Chapter 2).

z Deactivate the Bluetooth wireless feature if you are not using it

(see Chapter 2).

z Turn off the tablet PC when you are not using it.

Expanding Your 4-1

Expanding Your Tablet PC

You can expand the capabilities of your tablet PC by connecting other

peripheral devices. When using a device, be sure to read the instructions

accompanying the device together with the relevant section in this

chapter.

This chapter gives guidelines on installing and using these devices:

z USB device

z Smart Card

z PC card

z ExpressCard

z Docking Station

CHAPTER

Expanding Your 4-2

Connecting a USB Device

Your tablet PC has two USB ports for connecting USB devices, such as a

digital camera, scanner, printer, modem, and mouse.

The USB ports support transfer rates up to 12 MB/s for USB 1.1 devices

and 480 MB/s for USB 2.0 devices.

To connect a USB device, simply plug the device cable to one of the USB

ports ( ).

Expanding Your 4-3

Using Smart Cards

Your tablet PC has a smart card slot for additional security feature,

providing tamper-proof storage of user and account identity. A smart card

is a type of plastic card embedded with a computer chip that stores and

transacts data between you (user) and the tablet PC.

You need to install third-party smart card software to take advantage of

the smart card feature.

Inserting and Removing a Smart Card

To insert a smart card:

1. Locate the smart card slot on the rear of the tablet PC.

2. Slide the smart card, with its label and embedded computer chip

facing up into the slot.

3. When a new card is seated, use the third-party smart card software to

allow your tablet PC to read it.

To remove a smart card:

1. Make sure that the third-party smart card software is not accessing the

smart card.

2. Pull the card out of the slot.

Expanding Your 4-4

Using PC Cards (depending on your model)

Your tablet PC has a PC card slot which supports type II card and

CardBus specifications.

Inserting and Removing a PC Card

NOTE:

z Some PC cards require additional system resources. Before using such PC card,

you may have to free other system resources for the PC card.

z Although some PC cards can be inserted and removed without turning off the

computer, you cannot remove or install PC cards during Standby mode.

To insert a PC card:

1. Locate the PC card slot ( ) on the rear of the tablet PC.

2. Slide the PC card, with its label facing up, into the slot until the eject

button pops out.

3. When a new card is seated, the tablet PC will detect it and try to

install the appropriate driver. Follow the on-screen instructions to

complete the process.

To remove a PC card:

1. Double-click the Safely Remove Hardware icon found on the

Windows XP taskbar and the Safely Remove Hardware window

appears on screen.

Expanding Your 4-5

2. Select (highlight) the PC card from the list to disable the card.

3. Push the eject button and the card will slide out slightly.

4. Pull the card out of the slot.

Expanding Your 4-6

Using ExpressCards (depending on your

model)

NOTE: The ExpressCard interface is not compatible with the PC card interface. You

need optional adapters for using PC cards if your tablet PC comes with the

ExpressCard slot.

Your tablet PC may have an ExpressCard slot instead of a PC card slot.

ExpressCard supports the USB 2.0 serial data interface (supporting

speeds of up to 480 Mbps), improving speed in data transfer while

conserving power usage.

ExpressCard Type

The ExpressCard slot can accommodate a 54 mm (ExpressCard/54) or

34 mm (ExpressCard/34) wide ExpressCard. Typical ExpressCards

support a very extensive range of applications including memory, wired

and wireless communication cards, and security devices.

Shown next are the appearances of ExpressCards for your reference.

ExpressCard/54 ExpressCard/34

Expanding Your 4-7

Inserting and Removing an ExpressCard

To insert an ExpressCard:

1. Locate the ExpressCard slot ( ) on the rear of the tablet PC.

2. Slide the ExpressCard, with its label facing up, all the way into the

slot until the rear connectors click into place.

3. When a new card is seated, the tablet PC will detect it and try to

install the appropriate driver. Follow the on-screen instructions to

complete the process.

To remove an ExpressCard:

1. Double-click the Safely Remove Hardware icon found on the

Windows XP taskbar and the Safely Remove Hardware window

appears on screen.

2. Select (highlight) the ExpressCard from the list to disable the card.

3. Push the ExpressCard slightly to release the card.

4. Pull the card out of the slot.

Expanding Your 4-8

Using the Docking Station

A docking station is available as an option. This device eliminates the

hassles of having you connect and disconnect the various cables when

carrying your tablet PC around and allows a variety of peripherals to be

connected including a headphone or microphone, etc. The docking station

connects to the docking connector at the front of your tablet PC.

1. Locate the docking connector.

2. Connect your docking station to the docking connector.

For more detailed information, refer to the Operating Instructions of the

docking station.

NOTE: Hot/warm docking and hot/warm undocking are possible with the docking

connector but it is recommended that prior to undocking, press the button and Menu

the EasyTap utility screen appears. Click the Docking button.

Using BIOS Setup 5-1

Using BIOS Setup and

System Recovery Feature

BIOS Setup Utility is a program for configuring the BIOS (Basic Input/

Output System) settings of the tablet PC.

BIOS is a layer of software, called firmware, that translates instructions

from other layers of software into instructions that the tablet PC hardware

can understand. The BIOS settings are needed by your tablet PC to

identify the types of installed devices and establish special features.

The System Recovery feature allows your system’s hard disk drive to

return back to its factory default state with Windows operating system in

its initial setting.

This chapter tells you how to use the BIOS Setup program as well as the

System Recovery feature.

CHAPTER

Using BIOS Setup 5-2

When and How to Use BIOS Setup

When to Use

You need to run BIOS Setup utility when:

z You see an error message on the screen requesting you to run BIOS

Setup utility.

z You want to restore the factory default settings.

z You want to modify some specific settings according to the hardware.

z You want to modify some specific settings to optimize the system

performance.

Starting BIOS Setup

NOTE:

z The BIOS Setup utility screens shown in this chapter are for your reference only.

The actual items or settings on your tablet PC may differ.

z The BIOS Setup utility program may have been updated after the publication of this

manual.

z The settings you select in your operating system might override similar settings in

BIOS Setup utility.

To run BIOS Setup utility, press the Ent key when the prompt appears on

the screen during system startup. The prompt shows up on the screen for

only a few seconds. You must press the Ent key quickly. A small window

appears, select Launch System Setup. The BIOS Setup Utility main

screen appears as shown next.

Using BIOS Setup 5-3

The BIOS Setup utility screen can be divided into four areas:

z On the top is the menu bar containing the titles of the available

menus. Each menu title brings a specific menu.

z The left column of the menu displays the menu items.

z The right column of the menu provides more detailed information

when a menu item is highlighted.

z The bottom of the menu provides keyboard instructions for moving

around and making selections.

Using BIOS Setup 5-4

Moving Around and Making Selections

You must go through two or three levels to complete the setting for an

item. In most cases, there are two levels: menu title and submenu.

Use the arrow buttons to move around and make selections. Button

information can be found at the bottom of the screen. A brief description

of button usage is listed next:

Button Function

← → , Selects a menu title.

↑ ↓ , Selects an item or option.

Ent 1) Brings up the sub-menu when available.

2) Opens or closes the option window when an item is selected.

NOTE: You can press the F1 F9, , F10, – +/ , and Esc keys by connecting a USB

keyboard to your tablet PC. Make sure that the item “Legacy USB Support” under the

Main menu is set at Enabled (default).

Using BIOS Setup 5-5

Information Menu

The Information menu contains the basic configuration information of the

system.

Using BIOS Setup 5-6

Main Menu

The Main menu contains the system time and date, as well as the USB

setting of the system.

System Time sets the system time.

System Date sets the system date.

Power Button Delay allows you to prevent accidental pressing of the

power button.

Legacy USB Support enables the system’s support for Legacy USB

device in DOS mode.

Using BIOS Setup 5-7

Advanced Menu

The Advanced menu contains the advanced settings as shown next.

Total Graphics Memory allows you to select the amount of total

graphics memory (pre-allocated + fixed + DVMT) for use by the internal

graphics device.

DVMT Graphics Memory shows the size of DVMT graphics memory.

HDD Preheat allows your system to automatically turn on the optional

heater when temperature of the hard disk drive is lower than 5 oC.

NOTE: The optional heater can function when your tablet PC is connected to AC power

or using battery power but the preheat feature can only function when your tablet PC is

connected to AC power.

High Temperature Protection allows you to turn off hard disk drive

power to prevent damage to data when HDD temperature goes above the

safe range. System will also show a warning message.

Using BIOS Setup 5-8

Security Menu

The Security menu contains the TPM (Trusted Platform Module) setting.

The TPM is a component on your tablet PC’s mainboard that is

specifically designed to enhance platform security above-and-beyond the

capabilities of today’s software by providing a protected space for key

operations and other security critical tasks. Using both hardware and

software, TPM protects encryption and signature keys at their most

vulnerable stages – operations when the keys are being used unencrypted

in plain-text form. TPM is specifically designed to shield unencrypted

keys and platform authentication information from software-based

attacks.

TPM Support enables or disables TPM support (see chapter 6 for

details).

Current TPM State shows the current TPM state.

Change TPM State allows you to select between No Change, , Clear

Deactivate & Disable, and Enable & Activate.

Using BIOS Setup 5-9

Boot Menu

The Boot menu sets the sequence of the devices to be searched for the

operating system.

The bootable devices will be automatically detected during POST and

shown here, allowing you to set the sequence that the BIOS uses to look

for a boot device from which to load the operating system. A brief

description of button usage is listed next:

Button Function

↑ ↓ , Selects (highlight) a boot device.

1 to 4 Loads the default boot sequence.

NOTE: You can press the f, r, x, – +/ , and Shift + 1 keys by connecting a USB keyboard

to your tablet PC. Make sure that the item “Legacy USB Support” under the Main menu

is set at Enabled (default).

Using BIOS Setup 5-10

Exit Menu

The Exit menu displays ways of exiting BIOS Setup utility. After

finishing with your settings, you must save and exit so that the changes

can take effect.

Exit Saving Changes saves the changes you have made and exits BIOS

Setup utility.

Exit Discarding Changes exits BIOS Setup utility without saving the

changes you have made.

Load Setup Defaults loads the factory default values for all the items.

Discard Changes restores the previous values for all the items.

Saves Changes saves the changes you have made.

Using BIOS Setup 5-11

When and How to Use the System Recovery

Feature

When to Use

You need to run System Recovery when:

z Your tablet PC does not start correctly.

z Your Windows operating system does not start at all.

z You want to restore the factory default Windows settings.

Starting System Recovery

To run System Recovery:

1. During system startup when the following screen appears, press Ctrl +

Alt + F2

keys for four seconds or press Ent and select HDI Recovery

when a small window appears on the screen.

Using BIOS Setup 5-12

2. The message This will help you reinstall Windows to the whole

HDD to factory default. All data on HDD will be lost appears

on the screen to ask if you want to access System Recovery. Type 1 to

continue or type 0 to exit.

3. A warning message appears as follows:

****************************************

You must accept the following terms before performing the

recovery process:

1. The recovery software is solely the purpose of

reinstalling or restoring software associated with the hard

disk of this operating GETAC machine.

2. Except the above, no other use is granted hereunder.

****************************************

(1)Yes, I agree to the provisions of this agreement and wish

to continue.

(0)No, I do not agree to the provisions of this agreement

and do not wish to continue.

Type 1 to continue.

4. Type 1 again when the message Are you sure you want to recover

now? (1)Yes (0)No appears onscreen.

5. Your system will start the recovery process and Windows operating

system will be re-installed to its default setting.

Using the TPM 6-1

Using the TPM, EasyTap,

and G-Manager Utilities

Your tablet PC comes with an added security feature known as the TPM

(Trusted Platform Module) – a component on your tablet PC’s mainboard

that is specifically designed to enhance platform security above-and-

beyond the capabilities of today’s software by providing a protected

space for key operations and other security critical tasks.

The EasyTap utility allows you to activate or operate certain functions on

your tablet PC.

The G-Manager utility is a unified user interface utility that allows you to

manage and configure various system components such as: System,

Battery, Light Sensor, ECO (economy mode), Ignition, Monitoring,

Antenna, and GPS Status.

This chapter describes how to use these utilities.

CHAPTER

Using the TPM 6-2

Using TPM (Trusted Platform Module)

TPM is a hardware-based security feature that can be used to create and

manage computer-generated digital certificates. When combined with

security software, the TPM enhances existing network and computer

security by enabling features such as file protection capabilities and

protected e-mail.

NOTE:

z Make sure you select Enable on the TPM Support item under the Security menu

of your BIOS Setup (see chapter 5 for details).

z Make sure you select Enable & Activate on the Change TPM State item under the

Security menu of your BIOS Setup (see chapter 5 for details).

z You only need to activate these items once.

You can use the certificates to:

z Send and receive secure email from email clients like Microsoft

Windows Mail/Outlook Express, Microsoft Outlook or Netscape

Messenger

z Set up browser (e.g. Netscape Navigator or Internet Explorer) and

web server (e.g. Microsoft Internet Information Server) for Client

Authentication

z Sign Microsoft Word macros

z Encrypt files and folders

z Secure network connections

NOTE: For information on using the program and the different security features, click

Start Æ All Programs Æ Infineon Security Platform Solution Æ Help.

Using the TPM 6-3

Using the EasyTap Utility

The EasyTap utility allows you to activate or operate certain functions on

your tablet PC.

To start up the EasyTap utility:

1. Press the Menu button on your tablet PC.

Using the TPM 6-4

2. Upon pressing the Menu button, the following screen appears.

The following table shows the various functions on the EasyTap utility

screen.

Operation EasyTap Description

Switches the keypad lock ON and OFF. Press

the button one second to turn ON (lock) and

continuously for more than three seconds to turn

OFF (unlock).

This would prevent accidental pressing of the

keypad buttons during transport.

Switches the Fn keylock ON and OFF ( icon

appears on the system tray when ON).

You can use the secondary functions of keypad

buttons with blue color on top of each button.

An abbreviated Help file for using the EasyTap

utility is available.

Turns on the Quick Button Setup utility (refer to

the next section for details).

Using the TPM 6-6

Operation EasyTap Description

Toggles between LCD, VGA (external device

e.g., monitor), and BOTH (LCD and external

device).

Switches the display output when external

devices are connected. If the external device is

not connected, the choice would only be LCD.

Upon restarting your system, the setting would

be LCD only.

Serves as the default Microsoft® Internet

Explorer quick launch button.

You can use the Quick Button Setup utility to

assign a different function to this button (refer

to the next section for details).

Serves as the default Microsoft® Outlook

Express quick launch button.

You can use the Quick Button Setup utility to

assign a different function to this button (refer

to the next section for details).

Serves as the default LCD display calibration

tool quick launch button.

You can use the Quick Button Setup utility to

assign a different function to this button (refer

to the next section for details).

Serves as the default Bluetooth® wireless setup

quick launch button.

You can use the Quick Button Setup utility to

assign a different function to this button (refer

to the next section for details).

Serves as the default virtual keyboard quick

launch button.

You can use the Quick Button Setup utility to

assign a different function to this button (refer

to the next section for details).

Using the TPM 6-7

Operation EasyTap Description

Increases or decreases the sound volume. This

function adjusts the volume of sound output

both from the speakers and headphones. It is

synchronized with your Windows main volume

controller.

Upon restarting your system, Windows will

memorize the last setting before system

shutdown.

Increases or decreases the LCD brightness

level.

Upon restarting your system, Windows will

memorize the last setting before system

shutdown.

Switches the system sound output OFF (mute)

and ON. This function mutes the sound output

both from the speakers and headphones. It is

synchronized with your Windows main volume

controller.

Upon restarting your system, Windows will

memorize the last setting before system

shutdown.

Specyfikacje produktu

Marka:	Getac
Kategoria:	tabletka
Model:	E100

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Getac E100, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje tabletka Getac

Getac T800 G2 Instrukcja

26 Września 2024

Getac T800 G1 Instrukcja

26 Września 2024

Getac F110 G2 Instrukcja

26 Września 2024

Getac UX10 G3 Instrukcja

26 Września 2024

Getac A140 G2 Instrukcja

26 Września 2024

Getac A140 G1 Instrukcja

26 Września 2024

Getac F110 G4 Instrukcja

26 Września 2024

Getac ZX10 Instrukcja

26 Września 2024

Getac ZX70 G2 Instrukcja

26 Września 2024

Getac F110 G3 Instrukcja

26 Września 2024

Instrukcje tabletka

Najnowsze instrukcje dla tabletka

Mpman MPQC 804 Instrukcja

1 Kwietnia 2025

Mpman MPQC 974 Instrukcja

1 Kwietnia 2025

Storage Options Scroll Excel Instrukcja

1 Kwietnia 2025

Hip Street Nova 2 Instrukcja

1 Kwietnia 2025

Aqprox APPTB800S Instrukcja

31 Marca 2025

Microtech e-tab Pro LTE Instrukcja

30 Marca 2025

Dell Inspiron 13 7368 Instrukcja

30 Marca 2025

Fujitsu Stylistic Q7311 Instrukcja

30 Marca 2025

Fujitsu LifeBook U9311X Instrukcja

30 Marca 2025

Fujitsu Stylistic Q7312 Instrukcja

30 Marca 2025