Instrukcja obsługi Genie GCB01HD


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Genie GCB01HD (4 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/4
GCB01HD
HD Ground Loop Isolator
User Manual
GCB01HD - HD Ground Loop Isolator
2
1. Introduction
2. Key Features
2. Technical Specication
3. Board Diagram
The GCB01HD is a passive high efcient and reliable ground loop isolator for HDCVI / HDTVI / AHD /
Analogue Video Signal over Coaxial Cable. It’s magnetic isolation technology adoption can effectively
solve the interference issues caused by different ground potential during the signal transmission, which
improves the video anti-interference capability and effectively eliminate tearing and scrolling pictures. The
devices embedded lightning protection system improves the stability.
Passive, No Power Required
Eliminate Video Distortion caused by Ground Loops Circuit
Eliminate issues such as Image Tearing, Cross-Talk, Rolling etc.
Fully Compatible with HDCVI, HDTVI, AHD, Analogue Video Signals
Built-In 800v Insulated Voltage
Excellent Anti-interference Capability, Superior Lighting-Protection, ESD and EFT Capability
Support Unibody, with Small Volume
Model Number GCB01HD
Insertion Loss 0.5dB
Frequency Response 5Hz-70MHz
Input Impedance 75Ω
Output Impedance 75Ω
Isolation Voltage 800V (Minimum)
Isolation Resistance 100M Ω
Surge Protection Level3 Per IEC61000-4-5
ESD Protection Contact Discharge: 6KV, Air Discharge: 8KV, Per IEC61000-
4-2
Operation Temperature -10℃ ~ 55
Storage Temperature -40℃ ~ 85
Humidity 0~95% (Non-Condensing)
Dimensions (L × W × H) 41 x 24.5 x 21.6 mm
Weight 51g
*Design and Specications are subject to change without notice.
BNC Female Input BNC Male Output
GCB01HD - HD Ground Loop Isolator 3
4. Application Diagram
5. Installation Steps
6. Troubleshooting
1. Turn off the power supply of all the related devices before the installation to prevent damage to the
product.
2. Check if the coaxial cable and other transmission lines are occupied by other devices.
3. Connect the Male BNC of the device to the NVR.
4. Connect the Female BNC of the device to the camera with coaxial cable.
5. Check if the device is working and that the installation is correct. Make sure all connections are
reliable.
6. Power on the system.
7. Make sure the system can work regualrly.
Please follow below if the device doesn’t work:
Please make sure you have followed the instruction to install the device.
The transmission distance depends on the signal source and cable quality, please do not exceed the
maximum transmission distance.
Please replace a failure device with a proper one to check if the device is damaged.
If the problem still exists, please contact the dealer.
NOTE
Please use RG59 or above Coaxial Cable or CAT5e/6 Cable to reach the longest transmission distance.
LCD
Monitor
NVR
GCB01HD
Camera Coaxial Cable


Specyfikacje produktu

Marka: Genie
Kategoria: Niesklasyfikowane
Model: GCB01HD

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Genie GCB01HD, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane Genie

Genie

Genie M75 Instrukcja

1 Stycznia 2025
Genie

Genie ML90 Instrukcja

1 Stycznia 2025
Genie

Genie MP55 Instrukcja

1 Stycznia 2025
Genie

Genie ML105 Instrukcja

1 Stycznia 2025
Genie

Genie ML95 Instrukcja

5 Grudnia 2024
Genie

Genie GT 06 Combo Instrukcja

29 Września 2024
Genie

Genie DLS5 Instrukcja

22 Września 2024
Genie

Genie DPS20 Instrukcja

22 Września 2024
Genie

Genie RC 08B Instrukcja

28 Sierpnia 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane