Instrukcja obsługi Genexis Pulse EX600


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Genexis Pulse EX600 (9 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/9
Pulse
EX600
Installation Guide
Wi-Fi EasyMeshTM supported
Installation guide
You're just a few steps away to install your
device via the Genexis EasyWiFi app
Scan QR-code
Download app and
follow the steps
1
2
Installation with use of app
Seing up your Pulse device(s)
This installation guide is for installing
the Pulse EX600 as a router, as
explained on the right. In addition, an
extra Pulse EX600 can be installed as
a wireless or wired extender behind
the Pulse EX600 router.
Router
If you do not have a router installed,
start installing your Pulse EX600 here:
1. Connect a network cable between
your broadband outlet and the Pulse
EX600 WAN port (red port).
2. Connect the supplied power adapter
to the Pulse EX600 and plug the
adapter into a power socket.
3. Flip the ON/OFF switch at the back
of the device to turn it on.
4. Wait until the Status LED stops
blinking and turns solid green.
Your Pulse EX600 is now setup as a
router. Your network is now ready to
be extended with a wireless or
wired extender, as explained on the
next pages.


Specyfikacje produktu

Marka: Genexis
Kategoria: Niesklasyfikowane
Model: Pulse EX600

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Genexis Pulse EX600, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane Genexis

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane