Instrukcja obsługi Genelec 8351B SAM Studio Monitor (Producer Finish

Genelec monitor 8351B SAM Studio Monitor (Producer Finish

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Genelec 8351B SAM Studio Monitor (Producer Finish (8 stron) w kategorii monitor. Ta instrukcja była pomocna dla 10 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/8

8351B

Smart Active Monitor

Operating Manual

Introduction

Thank you for choosing Genelec! Fulfilling your dreams by

offering the most truthful sound reproduction has been the

source of our enthusiasm since 1978. Already over one million

Genelec monitors are in use around the world - welcome to our

story!

Genelec monitors are designed to last long our spare

part support extends far into future. They are hand-built in

Iisalmi, Finland, using certified sustainable methods. They are

individually tested and calibrated for the highest performance.

They have also all been designed for low power consumption in

use and in standby.

Please register your monitor at

http://www.community. genelec.com/

and receive an extended five-year warranty for spare parts.

For more information about our service and technical support,

please visit

http://www.genelec.com/customer-service.

System Characteristics

Each 8351B is supplied with a mains power cable, five-meter

GLM network cable and this operating manual. The Genelec

8351B is suitable for all professional monitoring applications

calling for very high precision and reliability. The 8351B

combines many remarkable Genelec technologies to provide

the benefits of a point source and controlled directivity over

an extraordinarily wide audio bandwidth. The 8351B may be

oriented horizontally or vertically. Listening distances can vary

from less than one meter to more than 4 meters, depending on

the room size and maximum sound level requirements.

Genelec Loudspeaker Manager™ (GLM™)

Software and GLM User Kit

The GLM software tailor-fits the 8351B to your room. It is

downloadable free of charge at www.genelec.com/glm. Check

regularly for updates and new features, and consider using the

cloud-based GLM services for the most up-to-date methods.

A GLM User Kit, comprising a USB adapter device and

measurement microphone, enables precise acoustic calibration

and operation of the GLM loudspeaker management network.

Minimum Diffraction Coaxial (MDC™)

The minimum diffraction coaxial transducer MDC design

implements a coaxial driver with unparalleled acoustic directivity

control. A powerful midrange transducer surrounds a high

output tweeter transducer, enabling a high resolution response

extending to ultrasonic frequencies. The MDC minimizes

acoustic diffraction, produces a flat frequency response on the

acoustical axis, and a neutral off-axis sound character.

Directivity Control Waveguide (DCW™) and

Acoustically Concealed Woofers (ACW™)

The 8351B has an exceptionally large Directivity Control

Waveguide extending over the whole enclosure front. The

midrange transducer cone forms a part of this DCW. Two woofers

radiate low frequencies through openings at the enclosure edges

and sum acoustically placing bass on the same acoustical axis

with the coaxial transducer. This unique design enables directivity

control of all audio down to low bass frequencies.

Smart Active Monitoring (SAM™)

Smart Active Monitors automatically tune several parametric

filters in themselves to precisely compensate for room

colorations using Genelec Loudspeaker Manager (GLM)

software. This enables SAM monitors to sound neutral and

achieve precise stereo imaging in all acoustical environments,

improving accuracy of monitoring.

Audio Inputs

The 8351B inputs support balanced analog line-level audio and

AES/EBU digital audio. At maximum sensitivity, -6 dBu analog

and -30 dBFS digital audio signals produce 100 dB SPL level at

one meter distance in free space.

The analog input is selected when a digital signal is not

present. The digital input is selected automatically when a

digital signal is present even when the signal is silent. The GLM

software can select either input.

When the digital audio source can adjust level, it is

advantageous to lower the output level of the 8351B using the

rear panel controls or the GLM Master Fader. This enables a

higher output level at the source with more resolution while

taking full advantage of the impressively low self-generated

noise of the 8351B.

An AES/EBU digital audio signal carries two channels in one

cable. A channel is selected using the DIP switches or GLM

software. The DIGITAL OUT carries an unaltered copy of the

input, enabling daisy-chaining of up to four monitors.

Power Management

The mains power input supports any mains voltage (100-240

VAC, 50-60 Hz) and the 8351B always delivers full power even

when the mains voltage fluctuates. When powered with a

generator, inverter or UPS device, we recommend filtering the

mains power to remove harmonics.

The energy saving function Intelligent Signal Sensing (ISS™)

puts the monitor to power educed sleep mode when no signal

is present. Upon sensing an input, the monitor wakes up. The

function is activated using GLM software or the ISS dip switch

on the monitor. With GLM the time before entering the sleep

mode can be adjusted, the ISS dip switch activates a fixed 60

minute time.

Setup Using The GLM™ Control

Genelec recommends setting up the 8351B and other SAM

monitors using GLM. This is described in the GLM System

Operating Manual. Although it can be used without GLM and the

network, the 8351B reaches its full potential with this method.

GLM software runs on Mac or Windows computers. GLM also

works as a monitor controller, for switching between sets of

loudspeakers, soloing, muting, invoking calibrated levels, etc.

Setup with the GLM User Kit consists of the following steps:

1. Connect a CAT5 (RJ45) cable to each monitor (and

subwoofer) and finally to the GLM Adapter device (see

Figure 1).

2. Connect the GLM Adapter device to computer USB connector.

3. Using a microphone stand, place the Genelec measurement

microphone (in GLM Kit) at the listening location. Point

microphone upwards. Place the microphone top at the ear

Figure 2. Connectors and controls on the back panel of a 8351B.

Figure 1. GLM control network cabling

Figure 3. Connector panel detail.

height for typical listener.

4. Connect the microphone to the microphone input in the

GLM Adapter device.

5. Download and install the GLM software at the Genelec web

site (www.genelec.com). Follow instructions in the software

to measure and set up your monitors.

6. If you plan not to use a computer for managing monitors,

store settings in monitors with GLM software (menu item

“Store | Store the Current Group Settings…”).

Enable stored settings by turning the DIP switch “Stored” on

the monitor to ON after the network has been disconnected.

The CONTROL NETWORK RJ-45 connectors are not

Ethernet LAN compatible. Do not connect to Ethernet LAN.

Stand-alone Mode: Setup Without Using

The GLM

You can adjust the 8351B without GLM using the controls on the

back of the monitor. These stand-alone settings are limited and

provide some fundamental compensations for room acoustic

effects, input selections and input sensitivity. To use, disconnect

the GLM management network and set the DIP switch “Stored”

to OFF position.

Stand-Alone Functionality

Bass Roll-Off Control

The Bass Roll-Off setting reduces bass level for spaces with

strong low frequency reverberation. It reduces output near the

MICROPHONE

PLACED IN

THE LISTENING

POSITION

292 00 63

GLM T ERMINA RT O

COMPUTER

RUNNING

GLM SOFTWARE

USB CABLE

GLM ADAPTER

GLM NETWORK

CABLE

MONITORS

SUBWOOFER

ANALOG

DIGI L T HRUTA

AES/EBU

DIGI TAL I N

AES/EBU

MADE IN FINLAND

8351B

SERIAL NUMBER

ww genelec.comw.

GLM

NETWORK

MAINS INPUT

50 / 60 Hz 200 W

100 240 V~

292 8350T 6

Th is de vice co mplie s

with FCC Par t 15 a nd

Can ad ian ICES 003

rad io freq ue nc y

Clas s B emiss ion

req uir emen ts. Refe r

to operating manual

for fu ll info rmatio n.

BASS ROLL OFF

LED DISABLE

BASS T ILT

20d B

OFF

ST ORED

(dB)

10d B

RESET YTO FACTOR

SETT INGS: PUSH

BUTT ON FOR 10 SEC

LEVEL

DIGIT AL

T REBLE T ILT +2

DESKT OP 160 Hz 4

(dB)

20 160

4k 20k

BAS S

TILT

800

BAS S

ROLLOFF

DESKT OP

ALL OFF

TREB LE

TILT

Frequency (Hz)

INPUT dBu

PRODUCING

100 dB SPL (1 m)

ISS

dBu

COAXIAL TRI A MPLIFIED

SMART ACTIVE MONITOR

DIP SWITCHES FOR

STAND ALONE USE

ROTARY LEVEL

CONTROL

POWER

SWITCH

AUDIO SIGNAL

CONNECTORS:

DIGITAL IN

DIGI L THRUTA

ANALOG IN

MAINS

INPUT

GLM NETWORK

CONNECTORS

Specyfikacje produktu

Marka:	Genelec
Kategoria:	monitor
Model:	8351B SAM Studio Monitor (Producer Finish
Kolor produktu:	Różowy
Typ produktu:	Zestaw do dekoracji
Kompatybilność:	Well A5/A7
Kompatybilność marki:	Electrolux