Instrukcja obsługi Genelec 4410A


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Genelec 4410A (18 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/18
4410A
Operating Manual
1
GENERAL DESCRIPTION
The bi- amplified Smart IP Genelec 4410A install loudspeaker is a compact two-
way active loudspeaker for fixed installations. CAT cable to It requires only one
connect, making installation easy. The 4410A loudspeaker is powered using the
standard standardsPower Ethernet PoE+ - -over (PoE) technology, using or PoE .
The proprietary internal power supply in 4410A deliver an impressive short s -term
SPL.
The 4410A -is a high resolution loudspeaker delivering a signal path and acoustic
output uses Genelec’s Minimum that extends to ultrasonic frequencies. It
Diffraction Enclosure (MDE) enclosure technology to reduce acoustic diffractions.
Combined with the advanced Directivity Control Waveguide (DCW) surrounding
the tweeter, this provides excellent frequency balance in difficult acoustic
environments.
The Smart IP 4410A loudspeaker supports Genelec Smart IP technology. The
technology provides scalable power, audio and loudspeaker configuration,
supervision and calibration features via a standard CAT cable, offering
integrators unrivalled power, flexibility, -cost effectiveness and simplicity of
installation.
The 4410A has been designed for excellent sound quality and very long lifetime.
The enclosure is made of environmentally friendly recycled die- cast aluminium.
The 4410A is manufactured using certified sustai ll essential nable methods. A
parts of the loudspeaker can be recycled.
The white colours. It is compatible with Genelec’s 4410A or is available in black
extensive range of mounting accessories for floor, ceiling, wall, or truss
mounting.
The 4410A loudspeaker contains
highly efficient dedicated power amplifierClass D s, one for each driver
-switched mode power supply technology offering high SPL output using
standard PoE+ and PoE power supply with an IP switch or power injector
active crossover filter
electronic protectionsystem
- - audio over IP streaming input
flexible room acoustic compensation tool set built in
2
Audio- -over IP streaming supports an unlimited number of channels in the
playback system. These audio channels are automatically synchronized perfectly
in time by the audio- -over IP streaming technology, forming a single playback
system. streamsThe Dante audio4410A accepts AES67/ST2110 and - -over IP .
The streams are set up with Dante Controller or Dante Domain Manager
software. supports Each 4410A reproduction of the sum of two audio input one or
channels stream sample rate can range . The audio from 32 96 kHz 16 24 - , with -
bit resolution.
The 4410A contains one rear panel CAT connector for standard Ethernet IP
network connectivity. The network interface speed is 100 Mbps. The rear panel
CAT connector also allows Genelec’s Smart IP Manager software to work on the
4410A on. This software is available for AV installers s Genelec web site and run
on Windows 10 allows computers. The software AV installers to configure an
almost unlimited number of rooms, zones, loudspeakers and audio channels, and
includes device discovery, a versatile room acoustic equalisation tool set, system
organisation and status monitoring.
The 4410A an application programming interface (API) supporting s contain
control via third-party hardware, software or house automation. The API enables
integration to all house and home automation systems. Detailed information
about the API are provided in a separate document from Genelec.
The 4410A is designed for indoor use, in temperatures 15-35 Celsius and relative
humidity 20 90 %.-
PACKING CONTENT
- Genelec two way active loudspeaker 4410A.
K - eyhole type wall mount with screws.
POSITIONING SPEAKERAND MOUNTING THE LOUD
Place the loudspeaker so that the line of the acoustic axis points towards the
main listening area. The AV install designers may indicate different aiming.
The minimum clearance for amplifier cooling and reflex port function around the
loudspeaker is 3 cm (1 3/16 in) behind, above and on both sides of the
loudspeaker. If the back side of the loudspeaker is blocked, it must be ventilated
so that the ambient temperature remains below 35° ° C (95 F) at any moment of
operation.


Specyfikacje produktu

Marka: Genelec
Kategoria: głośnik
Model: 4410A

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Genelec 4410A, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje głośnik Genelec

Genelec

Genelec 3440A Instrukcja

7 Października 2024
Genelec

Genelec 8010 APM Instrukcja

30 Września 2024
Genelec

Genelec 8020D Instrukcja

27 Września 2024
Genelec

Genelec 8340APM Instrukcja

21 Września 2024
Genelec

Genelec 1234A Instrukcja

21 Września 2024
Genelec

Genelec 8430APM Instrukcja

19 Września 2024
Genelec

Genelec 4436A Instrukcja

13 Września 2024
Genelec

Genelec 8010 AW Instrukcja

10 Września 2024
Genelec

Genelec 8040A Instrukcja

9 Września 2024
Genelec

Genelec 8020B Instrukcja

9 Września 2024

Instrukcje głośnik

Najnowsze instrukcje dla głośnik