Instrukcja obsługi GE ZGU36L4RYSS

GE piekarnik ZGU36L4RYSS

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla GE ZGU36L4RYSS (12 stron) w kategorii piekarnik. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/12
GE Monogram®
Installation
Instructions
Professional
Gas Cooktops
48" Natural Gas Models
ZGU48N4G
ZGU48N6R
ZGU48N6D
48" LP Gas Models
ZGU48L4G
ZGU48L6R
ZGU48L6D
36" Natural Gas Models
ZGU36N6
ZGU36N4R
ZGU36N4D
36" LP Gas Models
ZGU36L6
ZGU36L4R
ZGU36L4D
2
Before you begin—Read these instructions completely and carefully.
IMPORTANT: Save these instructions for local inspector’s use.
IMPORTANT: OBSERVE ALL GOVERNING CODES AND ORDINANCES.
NOTE TO INSTALLER: Be sure to leave these instructions with the Consumer.
NOTE TO CONSUMER: Keep these instructions with your Owner’s Manual for future reference.
This appliance must be properly grounded. See “Electrical Supply”, page 6.
CAUTION
WARNING
For Monogram local service in your area,
1-800-444-1845.
For Monogram Service in Canada,
Call 1-888-880-3030.
For Monogram Parts and Accessories, call
1-800-626-2002.
If you received a damaged cooktop, you
should contact your dealer.
Proper installation is the responsibility of the
installer. Product failure due to improper
installation is not covered under the GE
Appliance Warranty. See the Owner’s Manual
for details.
CAUTION:
THESE COOKTOPS SHOULD BE
INSTALLED IN CONJUNCTION WITH A
SUITABLE OVERHEAD VENT HOOD. Due
to the high heat capacity of this unit, particu-
lar attention should be paid to the hood and
duct work installation to assure it meets local
building codes.
Standard countertop and island installations:
A 1200 CFM Hood is recommended for 48"
cooktops.
A 600 CFM hood is recommended for 36"
cooktops.
Hoods should be 24" min. deep and the same
width as the cooktop.
Island installations:
Check local building codes for the proper
method of cooktop installation. Local codes
vary. Installation, electrical connections and
grounding must comply with applicable codes.
In the absence of local codes, the cooktop
should be installed in accordance with the
National Fuel Gas Code ANSI 223.1-1990 and
National Electrical Code ANSI/NFPA 70-1990.
CAUTION:
These cooktops are extremely heavy. Due to
the weight and size of the cooktop and to
reduce the risk of personal injury or damage
to the product, TWO PEOPLE ARE
REQUIRED FOR PROPER INSTALLATION.
Contents Design Information
Models Available.................................................................................................................................. 3
Accessory Requirements ..................................................................................................................... 3
Product Dimensions and Clearances ................................................................................................. 4
Installation Options ............................................................................................................................ 5
Advance Planning ............................................................................................................................... 5
Installation Preparation
Tools & Materials Required ................................................................................................................ 6
Power Supply Locations ...................................................................................................................... 6
Installation
Step 1: Remove Packaging .................................................................................................................. 7
Step 2: Cut the Countertop Opening ................................................................................................ 7
Step 3: Install the Cooktop ................................................................................................................. 8
Step 4: Conect Cooktop to Gas .......................................................................................................... 8
Step 5: Install the Cooktop Backguard .............................................................................................. 8
Step 6: Connect Electrical .................................................................................................................. 9
Step 7: Assemble Burners, Check Ignition ........................................................................................ 9
Adjustable Low Burner Settings .......................................................................................... 10
Finalize Installation ........................................................................................................................... 10
3
Design Information
Professional Gas Cooktops
These cooktops are factory set for either
natural gas or liquid propane gas. Order the
model for your installation situation.
48" Natural Gas Models:
ZGU48N4G
4 gas burners, grill and griddle
ZGU48N6R
6 gas burners and grill
ZGU48N6D
6 gas burners and griddle
48" Liquid Propane Gas Models:
ZGU48L4G
4 gas burners, grill and griddle
ZGU48L6R
6 gas burners and grill
ZGU48L6D
6 gas burners and griddle
Models
Available
36" Natural Gas Models:
ZGU36N4D
4 gas burners and griddle
ZGU36N4R
4 gas burners and grill
ZGU36N6
6 gas burners
36" Liquid Propane Gas Models:
ZGU36L4D
4 gas burners and griddle
ZGU36L4R
4 gas burners and grill
ZGU36L6
6 gas burners
All models require the installation of a
backguard or trim. A backguard/trim should be
ordered at the same time as the cooktop. Both should
be on site at the time of installation.
48" backguards, order one:
ZXC1B48
1/2" trim backguard (required for island installations
or installations where back wall is non-combustible;
such as brick, ceramic tile, marble, etc).
ZXC12B48
12" high backguard
ZXC22B48
22" high backguard with warming shelf (2 piece)
36" backguards, order one:
ZXC1B36
1/2" trim backguard (required for island installations
or installations where back wall is non-combustible;
such as brick, ceramic tile, marble, etc).
ZXC12B36
12" high backguard
ZXC22B36
22" high backguard with warming shelf (2 piece)
Accessory
Requirements 22" High Backguard With
Warming Shelf
1/2" Trim
12" High Backguard
Installation Note:
For approved installations to non-combustible back wall materials, consult
material representative to ensure that the material has appropriate resistance
to staining and/or discoloration.

Specyfikacje produktu

Marka: GE
Kategoria: piekarnik
Model: ZGU36L4RYSS

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z GE ZGU36L4RYSS, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje piekarnik GE

GE

GE JB710WHWW Instrukcja

15 Października 2024
GE

GE Adora JBP73HLBB Instrukcja

14 Października 2024
GE

GE JGP330SEKSS Instrukcja

14 Października 2024
GE

GE JBP62BMWH Instrukcja

9 Października 2024
GE

GE PC2S930YPFS Instrukcja

8 Października 2024
GE

GE Profile PB911DJBB Instrukcja

8 Października 2024
GE

GE JP346BMBB Instrukcja

7 Października 2024
GE

GE Profile JS966KDCC Instrukcja

7 Października 2024
GE

GE JBP68SHSS Instrukcja

6 Października 2024
GE

GE JBP84DMBB Instrukcja

6 Października 2024

Instrukcje piekarnik

Najnowsze instrukcje dla piekarnik

Wolf

Wolf M Series Instrukcja

15 Października 2024
Princess

Princess 112741 Instrukcja

15 Października 2024
Boretti

Boretti VFPNR 1202 IX Instrukcja

15 Października 2024
Ilve

Ilve MDC-120 Instrukcja

15 Października 2024
Frigidaire

Frigidaire FCWD2727AW Instrukcja

15 Października 2024
Fisher & Paykel

Fisher & Paykel CG302DLPGB4 Instrukcja

15 Października 2024
AEG

AEG IKK74545FB Instrukcja

15 Października 2024
Ilve

Ilve HCPT75D Instrukcja

15 Października 2024
Zanker

Zanker KOU65902XK Instrukcja

15 Października 2024
Hoover

Hoover PHC3B25CXHH64DCT Instrukcja

15 Października 2024