Instrukcja obsługi Garmin Montana 650


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Garmin Montana 650 (88 stron) w kategorii Nawigacja osobista. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/88
Instructions
Instructions
Istruzioni
Anweisungen
Instrucciones
Instruções
Instructies
Instruktioner
Ohjeet
Instruksjoner
Instruktioner
Instrukcja
Pokyny
Инструкции
Marine Mount
MONTANA 600 Series
2 Montana600SeriesMarineMountInstructions

See the Important Safety and Product Information in the Montana product box
before installing the marine mount.

Always wear safety goggles, ear protection, and a dust mask when drilling,
cutting, or sanding.
notice
Incorrectly wiring the power or audio cable with bare wire leads can result
in damage to the boat or the battery. Garmin strongly recommends having an
experienced installer with the proper knowledge of electrical systems install the
mount.
The metal contacts on the Montana and the mount should be kept dry to avoid
equipment damage. Use the weather cap on the mount at all times when the unit is
not mounted to keep the metal contacts dry and protected.

Drill
Hardware for the swivel mount: 3 bolts or 3 screws (not included)
#8 (4 mm) pan-head machine bolts with matching nuts and washers and
a 5/32 in. (5 mm) drill bit
#8 (4 mm) pan-head self-tapping screws and a 1/16 in. (1.5 mm) drill bit
for drilling starter holes
Montana600SeriesMarineMountInstructions 3
3/8 in. (9.5 mm) wrench or socket
Phillips or at screwdriver

notice
Do not place the swivel mount in an area that is exposed to extreme temperature
or conditions. The temperature range for the Montana is from 5°F to 158°F (from
-15°C to 70°C). Extended exposure to temperatures exceeding this range (in
storage or operating conditions) may cause failure of the LCD screen.
Use pan-head machine bolts or self-tapping screws to secure the swivel base. If
you use screws with countersunk heads, you may damage the mounting bracket.
Select a location to install the mount.
The location provides a clear view of the screen and access to the Montana.
The location is sturdy enough to support the Montana and the mount.
The location allows room for the routing and connection of the cables.
There should be at least a 3 in. (8 cm) clearance behind the case.

notice
Do not overtighten the screws or bolts; you may damage the swivel base.


Specyfikacje produktu

Marka: Garmin
Kategoria: Nawigacja osobista
Model: Montana 650

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Garmin Montana 650, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Nawigacja osobista Garmin

Instrukcje Nawigacja osobista

Najnowsze instrukcje dla Nawigacja osobista