Instrukcja obsługi Garmin GT8HW-IH

Garmin Niesklasyfikowane GT8HW-IH

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Garmin GT8HW-IH (2 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/2

GT8HW-IH Transducer

Installation Instructions

Mounting Considerations

• On single thickness fiberglass hulls, the transducer should be

mounted in the bilge area near the keel and transom.

• The transducer should not be mounted aft of the water pickup

and other protrusions.

• The transducer should not be mounted over a strake.

• The transducer should be mounted over solid fiberglass, with

no dead air space or coring in the boat hull.

• The transducer should be mounted as flat as possible in the

boat hull.

• The maximum deadrise angle is 6 degrees.

TIP: You can search the Internet for marine electronics forums

and videos that can help you to select the best mounting

location.

Deadrise Angle

Deadrise is the angle formed between a horizontal line and a

boat hull at a single point. You can measure the deadrise angle

with a smartphone application, an angle finder, a protractor, or a

digital level. You can also ask your boat manufacturer for the

deadrise angle of the specific point on your boat hull.

NOTE: A boat may have several deadrise angles depending on

the shape of the hull. Measure the deadrise angle only at the

location where you plan to install the transducer.

Tools Needed

• 80-grit sandpaper

• Marine-grade, quick-curing epoxy

• Rubbing alcohol

Testing the Mounting Location

Before you permanently mount the transducer, you should test

the transducer feedback at your mounting location with the boat

in the water. You should compare the transducer feedback at

your mounting location to the transducer feedback when the

bottom of the transducer is submerged outside the boat.

1Place the transducer inside a thin plastic bag.

2Fill the bag with enough water to cover the bottom of the

transducer, and secure the bag with a zip tie.

3Wet the surface of the hull.

4Place the bagged transducer on the mounting location.

5Observe the feedback of the transducer on your chartplotter

or fishfinder.

6If the transducer does not function as expected, select a new

mounting location and repeat steps 3 through 5.

Installing the In-Hull Transducer

1Sand the tested mounting location (Testing the Mounting

Location, page 1) with 80-grit sandpaper.

2Clean the tested mounting location with alcohol.

3Lightly sand the bottom of the transducer, and clean the

transducer with alcohol.

4Remove the release liner from the foam mounting ring

À, and

press the ring firmly onto the mounting surface.

5Fill the mounting ring one-third full of prepared quick-cure

epoxy Á.

6Slowly and firmly press the transducer Â into the ring,

removing air bubbles to ensure sonar signal strength.

NOTE: The epoxy should rise to the top of the foam ring, and

cover the lower part of the transducer housing to ensure

maximum signal coupling and secure the transducer.

7While applying pressure, slowly rotate the transducer one

quarter turn.

8Hold until the epoxy thickens, then place a weight on the

transducer, or tape the transducer in place, until the epoxy

hardens.

NOTE: The epoxy will cure in 24 hours.

9Route the cable, and connect the transducer to your

chartplotter or fishfinder.

NOTE: Do not operate the transducer until the epoxy has

fully cured.

Software Update

You may need to update the device software when you install

the device or add an accessory to the device.

The software update requires either a Garmin® memory card

reader accessory or another Garmin chartplotter connected over

the Garmin Marine Network.

The Garmin memory card reader accessory is sold separately.

Loading the New Software on a Memory Card

You must copy the software update to a memory card using a

computer that is running Windows® software.

NOTE: You can contact Garmin customer support to order a

preloaded software update card if you do not have a computer

with Windows software.

1Insert a memory card into the card slot on the computer.

2Go to .www.garmin.com/support/software/marine.html

3Select next to the software bundle that Download

corresponds with your chartplotter.

NOTE: The software download includes updates for all

devices connected to the chartplotter. Select the correct

bundle that corresponds to the chartplotter to be updated.

You can select See All Devices in this Bundle to confirm the

devices included in your download.

4Read and agree to the terms.

5Select .Download

6If necessary, select .Run

7If necessary, select the drive associated with the memory

card, and select > .Next Finish

8Extract the files to the memory card.

NOTE: The software update can take several minutes to load

onto the memory card.

January 2017 Printed in Taiwan 190-02162-02_0A

Updating the Device Software

Before you can update the software, you must obtain a

software-update memory card or load the latest software onto a

memory card.

1Turn on the chartplotter.

2After the home screen appears, insert the memory card into

the card slot.

NOTE: In order for the software update instructions to

appear, the device must be fully booted before the card is

inserted.

3Follow the on-screen instructions.

4Wait several minutes while the software update process

completes.

5When prompted, leave the memory card in place and restart

the chartplotter manually.

6Remove the memory card.

NOTE: If the memory card is removed before the device

restarts fully, the software update is not complete.

Specifications

Specification Measurement

Transmit power 250 W (RMS)

Maximum depth* 244 m (800 ft.)

Frequencies** From 150 to 240 kHz

Operating temperature range From 0° to 50°C (from 32° to 122°F)

Storage temperature range From -40° to 70°C (from -40° to 158°F)

*Dependent upon the water conditions.

**Dependent upon the chartplotter or fishfinder model.

Garmin® and the Garmin logo are trademarks of Garmin Ltd. or its subsidiaries,

registered in the USA and other countries. These trademarks may not be used without

the express permission of Garmin.

Specyfikacje produktu

Marka:	Garmin
Kategoria:	Niesklasyfikowane
Model:	GT8HW-IH

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Garmin GT8HW-IH, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Niesklasyfikowane Garmin

Garmin GDT 43 Instrukcja

14 Października 2024

Garmin Edge Power Mount Instrukcja

9 Października 2024

Garmin Approach Z30 Instrukcja

7 Października 2024

Garmin GMM 170 Instrukcja

4 Października 2024

Garmin GMR 18 xHD Instrukcja

4 Października 2024

Garmin GT30-TH Instrukcja

3 Października 2024

Garmin GT51M-TH Instrukcja

2 Października 2024

Garmin Panoptix PS60 Instrukcja

1 Października 2024

Garmin GPS 17HVS Instrukcja

30 Września 2024

Garmin GPSMAP 8015 MFD Instrukcja

30 Września 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Black Diamond BD1121530000ALL1 Instrukcja

15 Października 2024

Husqvarna K 970 SmartGuard Instrukcja

15 Października 2024

Stihl HT 70 Instrukcja

15 Października 2024

Ernesto H14270 Instrukcja

15 Października 2024

Uniden BT MIC KIT Instrukcja

15 Października 2024

Vaude Omnis Bike 26 Instrukcja

15 Października 2024

ART ProChannel II Instrukcja

15 Października 2024

Aukey DR02J Instrukcja

15 Października 2024

Master Lock 653EURD Instrukcja

15 Października 2024

Roland FR-18 Diatonic Instrukcja

15 Października 2024