Instrukcja obsługi Garmin etrex vista cx
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Garmin etrex vista cx (2 stron) w kategorii Nawigacja. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/2
Quit/
Compass
Key
Power/
Backlight
key
hiking companion
quick reference guide
eTrex® Vista Cx
Marking a Waypoint
To mark your current location:
1. Press and hold to open the Enter
Mark Waypoint Page.
2. To accept the waypoint with the
default information, highlight , OK
and press .Enter
OR
To change any information on the
Mark Waypoint Page, highlight the
appropriate field, and press to open the on-screen Enter
keypad. After entering and confirming your changes,
highlight , and press .OK Enter
To create a new waypoint using the Map Page:
1. Open the Map Page, and use the to move Rocker
the pointer ( ) to the map item you want to mark as a
waypoint.
2. Press and quickly release to Enter
capture the pointer location.
If you highlighted a map feature,
an information page appears.
Highlight , and press to Save Enter
save the item as a waypoint.
OR
If the map item selected contains
no information, a “No map information at this point. Do you
want to create a user waypoint here?” message appears.
Highlight Yes Enter, and press .
Finding Map Items
To find an item from your current location:
1. Press and hold the key to open the Find Menu.Menu
2. Highlight a category icon (Waypoints Cities Exits, , , for
example), and press .Enter
3. Use the to highlight an item, and press to Rocker Enter
open the information page for the selected item.
Going to a Destination
To Go To a highlighted map item:
1. Use the to highlight the item you want to navigate Rocker
to on the Map Page.
2. Press and quickly release to capture the pointer Enter
location ( ) and open the information page.
3. Highlight Go To Enter, and press to begin navigation.
4. Follow the magenta route created on the Map Page. You
can also use the Compass Page to help you navigate to
the point.
To initiate a Go To from the Find Menu:
1. Press the key to open the Find Menu.Find
2. Highlight the Waypoint Enter icon, and press to open the
Waypoints Page.
3. Use the to select a waypoint, and press . Rocker Enter
The Waypoint Page opens.
4. Highlight Go To Enter, and press to begin navigation.
To go to a recently found item:
1. Press the key to open the Find Find
Menu.
2. Highlight the icon, Recent Finds
and press to open the Recent Enter
Finds Page.
3. Use the to select an item to Rocker
go to, and press to open the Enter
information page for the item.
4. Highlight Go To Enter, and press to begin navigation.
190-00514-01 Rev. A © Copyright 2006 Garmin Ltd. or its subsidiaries Printed in Taiwan
To find an item from another location using the Find
Menu:
1. Press the key to open the Find Menu.Find
2. Highlight a category icon (Waypoints Cities Exits, , , for
example), and press .Enter
3. Press the key to open the Options Menu.Menu
4. Highlight , and press .Change Reference Enter
5. Use the to select a reference point on the map, Rocker
and press . The list changes to show items nearest Enter
to the new map location.
Waypoints ListFind Menu Information Page
GPS antenna
In/Out (Zoom)
keys
Enter/Rocker
key
Menu/Find
key
Color LCD display
NOTE: For the Find Menu to display all of the categories shown above, MapSource detailed map
data must be downloaded to the microSD™ or TransFlash™ card. (Refer to the owner’s manual for
detailed information.)
Using the Keypad Main Pages
The eTrex Vista Cx has four recurring main pages and one that
displays only with each start-up. Press and release the key Quit
to cycle through the page sequence.
Map Page
Satellite Page
Compass Page—guides you to your destination.
Altimeter Page—tracks elevation and pressure.
Main Menu—contains advanced features and settings.
Altimeter PageCompass Page Main Menu
Satellite Page—appears only at start-up and shows the GPS
receiver status, satellite locations, satellite signal strength, and the
receiver’s current location.
Map Page—shows a detailed map of the area around your
current location.
(Press down to Enter. Move to the side or up or down to scroll,
move the cursor, or increase or decrease values.)
Route Setup
Routes List
Route on Map
Power/Backlight key—press and hold to turn
the unit on or off. Press and release to adjust the
backlighting, view the date or time, and view
the battery capacity.
In/Out Zoom keys—from the Map Page, press
to zoom in or out. From any other page, press to
scroll up or down a list.
Menu/Find key—press and release to view op-
tions for a page. Press twice to view the Main
Menu. Press and hold to display the Find Menu.
Quit/Compass key—press to cycle through the
main pages. Press and release to cancel data
entry or exit a page. Press and hold to turn the
compass on or off.
Enter/Rocker key—press and release to enter
highlighted options and data or confirm on-
screen messages. Press and hold to mark your
current location as a waypoint. Move up, down,
right, or left to move through lists; highlight
fields, on-screen buttons, or icons; enter data; or
to move the map panning arrow.
Getting Started
To install the batteries:
1.
Remove the battery
cover from the back of
the unit by turning the
D-Ring 1/4 turn counter-
clockwise and pulling the
cover away.
2.
Insert two AA batteries,
and replace the
battery cover.
3. Turn the D-Ring 1/4
turn clockwise to lock
the cover in place.
To turn on the eTrex
Legend Cx:
1. Press and hold the
Power key. A tone sounds, and the Introduction Page
appears, followed by the Satellite Page.
The GPS receiver begins searching for satellite signals.
When the receiver has signals from at least three
satellites, the display at the top of the page indicates
position accuracy and location coordinates.
2.
Press the key repeatedly until the Map Page appears. Quit
You are now ready to begin GPS-aided navigation.
To adjust the backlight level:
1. Press and quickly release the key to Power
open the backlight adjustment slider.
2. Press up on the to increase the Rocker
brightness, or press down to decrease.
3. Press or the key to close the Enter Quit
backlight adjustment window.
Battery compartment
PUSH TO EJECT
Locking
pin slot
microSD™
or
TransFlash™
card slot
Creating a Route
To create and use a route:
1. Access the Routes Page from the Main
Menu. The page has a button, an New
Active button, and space for a list of
saved routes.
2. Use the key to highlight the Rocker
New Enter button, and then press to
display the Route Setup Page.
3. With an empty row (dashed) in the
route list highlighted, press to display the Find Enter
Menu.
4.
Use the Find Menu to select a route
waypoint from one of the Find Menu
map item groups. Display the information
page for the selected item, highlight the
on-screen button, and press to Use Enter
add it to the route list of via points.
5. To add more via points to your route,
repeat the process.
6. When you have completed the route,
highlight the button to begin Navigate
calculation of the route and navigation
using the Map Page.
7. Follow the instructions at the top of the
Map Page, the magenta route overlay
on the map, and turn-by-turn pop-up
prompts.
8.
To stop navigation at any time, press
the key, select ,Menu Stop Navigation
and press . The route is automatically saved to the Enter
Routes List. To resume navigation, return to the Options
Menu, select , and press .Resume Navigation Enter
Specyfikacje produktu
| Marka: | Garmin |
| Kategoria: | Nawigacja |
| Model: | etrex vista cx |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Garmin etrex vista cx, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Nawigacja Garmin
25 Września 2024
9 Sierpnia 2024
4 Lipca 2024
4 Lipca 2024
4 Lipca 2024
4 Lipca 2024
4 Lipca 2024
4 Lipca 2024
4 Lipca 2024
4 Lipca 2024
Instrukcje Nawigacja
- Nawigacja Pioneer
- Nawigacja Audi
- Nawigacja Sygic
- Nawigacja Toyota
- Nawigacja Panasonic
- Nawigacja Mio
- Nawigacja Kia
- Nawigacja Medion
- Nawigacja Marquant
- Nawigacja Seat
- Nawigacja Mazda
- Nawigacja Skoda
- Nawigacja Volvo
- Nawigacja Suzuki
- Nawigacja Kenwood
- Nawigacja JVC
- Nawigacja Becker
- Nawigacja Tacx
- Nawigacja Navitel
- Nawigacja GoClever
- Nawigacja Prestigio
- Nawigacja Navman
- Nawigacja TomTom
- Nawigacja Magellan
- Nawigacja Raymarine
- Nawigacja Binatone
- Nawigacja A-Rival
- Nawigacja Apelco
- Nawigacja LX NAV
- Nawigacja GlobalTronics
- Nawigacja Audiovox
- Nawigacja Navigon
- Nawigacja Eagle
- Nawigacja Targa
- Nawigacja Autovision
- Nawigacja Sungoo
- Nawigacja Danew
- Nawigacja Snooper
- Nawigacja VDO Dayton
- Nawigacja Macrom
- Nawigacja Packard Bell
- Nawigacja Mappy
- Nawigacja Fujitsu Siemens
- Nawigacja Igo
- Nawigacja Pentagram
- Nawigacja Route 66
- Nawigacja Falk
- Nawigacja Bullit
- Nawigacja Viamichelin
- Nawigacja Xzent
- Nawigacja Navteq
- Nawigacja Igo 8
- Nawigacja Keomo
- Nawigacja RoHS
- Nawigacja Invion
- Nawigacja VW
- Nawigacja Raystar
- Nawigacja Eclipse
- Nawigacja Holux
- Nawigacja Roadnavigator
- Nawigacja WayteQ
- Nawigacja GoRider
Najnowsze instrukcje dla Nawigacja
5 Października 2024
5 Października 2024
5 Października 2024
5 Października 2024
5 Października 2024
5 Października 2024
5 Października 2024
5 Października 2024
5 Października 2024
28 Września 2024