Instrukcja obsługi Futaba FP3EG


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Futaba FP3EG (12 stron) w kategorii Sterowanie radiowe. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/12
Futaba
DIGITAL PROPORTIONAL
RADIO CONTROL
Thank you for purchasing a Futaba digital proportional
radio control set.
Please read this manual thoroughly before using your
new
set.
CONTENTS
FEATURES
....................... 1
CONTENTS
AND
RATINGS
............. 2
TRANSMITTER
FP
T3EG
.............. 3
NEUTRAL
LEVER.
.................. 3
CONVERSION
TO SELF-NEUTRAL
........ 3
OPENING THE TRANSMITTER REAR COVER
AND
LOADING
THE
BATTERIES
......... 4
CONVERTING TRANSMITTER TO
NiCd SYSTEM
..................... 4
SERVO REVERSING
................. 5
RECEIVER FP-R3F & SERVO
............
5
RECEIVER, SERVO, & SWITCH HARNESS.
... 6
THROTTLE->RUDDER
MIXING
ADJUSTMENT.
............... 7
RUDDER
DUAL
RATE
................ 8
FPS24&
S27
EXPLODED
VIEWS.
......... 9
IMPORTANT: _______________________________________________________
AN FCC CLASS C LICENSE IS REQUIRED TO OPERATE THIS SYSTEM. WRITE TO THE
FEDERAL COMMUNICATIONS COMMISSION AS LISTED BELOW FOR AN APPLICA-
TION FORM #505.FEDERAL COMMUNICATIONS COMMISSION
P.O.
BOX
1010
Gettysburg, PA 17325
*AII prices and specifications subject change without notice.
•FEATURES
The FP-3EG is a high quality 3 channel, expanded digital proportional radio control set.
The receiver and servo power is a four-battery; 4.8V (Ni-Cad)/6.0V (Dry-Cell). The
transmitter power supply is 9.6V (Ni-Cad)/10.5V (Dry-Cell). 3FG with S24 servos
only comes with Ni-cads for both
TX
and RX. Speed and torque of our servo are the
highest in its class.
Transmitter FP-T3EG
•Rudder dual rate (dual-rate on, dual-rate
off). The desired rudder angle can be se-
lected when dual-rate on.•Servo reversing switch
at rudder and
nd throttle channel.
•Throttle and rudder mixing is adjustable
up to the limit point.
•Three channel transmitter. Third channel
has a click knob and can be conveniently
used as a subchannel.
•Throttle
lever
has
a
neutral
shift
device,
but can be instantly changed to a ratchet
type.
Semi-open gimbal sticks provide maximum
feel.
Neck band provided as standard. Com-
fortable operation is possible by hooking
the band around your neck.
•Seven pen-cell battery power supply can
also be changed to Ni-Cad battery (NT-8C).
Beautiful exterior based on human engine-
ering. Easy-to-use design.
Servo FP-S24
•Highest output torque (4.5kg-cm/62.7oz-in.
or greater) of any servo in its class.
•Output
gear
is
supported
at
the
top
and
bottom by ball bearings for excellent
neutral characteristics, long life,
and
smooth operation.
Large 20m/m diameter coreless motor fea-
tures high torque near neutral and exact
tracking of even minute rudder movements.
Indirect drive system extends the life
of
the potentiometer substantially.
Watertight/dustproof.
Besides the FP-S24, FP-S27, watertight
servo is available with this system.
1
Receiver FP-R3F
•Miniature type, light, weight, rugged con-
struction.
•Crystal is replaceable from the outside.
•3P mini-connectors are compatible with
existing sets.
3 channel specifications.
•Newly developed receiver use Futaba Cus-
tom I/C, BA633. This I/C is extremely
stable against power supply voltage fluctu-
ations.
•Adjacent frequency interference is mini-
mized by the use of an RF amplifier circuit
and ceramic filter.


Specyfikacje produktu

Marka: Futaba
Kategoria: Sterowanie radiowe
Model: FP3EG

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Futaba FP3EG, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą