Instrukcja obsługi Furuno FA-150

Furuno Niesklasyfikowane FA-150

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Furuno FA-150 (4 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/4
FA-150 UAIS TRANSPONDER
Operator’s Guide
The purpose of this Operator's Guide is to provide basic operating procedures for this equipment. For more
detailed information see the Operator's Manual.
MENU ENT
DISP DIM
FA-150
NAV
STATUS
PWR
UNIVERSAL AIS
Opens the menu.
Shifts cursor; chooses menu
items and options; enters
alphanumeric data.
Terminates keyboard input;
changes screen.
Adjusts panel dimmer and
LCD contrast.
Displays nav status menu,
which sets up for a voyage.
Turns the power on and off.
Chooses a display screen; closes menu.
[FURUNO]
HDG: 111°
SOG: 10
kn
COG: 111°
CPA: 6.19
TCPA: 12'59"
INTRD: 1
Selected target
(circle filled in black)
Target (hollow circle)
Own ship
course marker
Display range RNG: 6 DETAIL:[ENT]
Target name
Heading
Speed
Course
CPA
TCPA
NM
Dangerous target
(Target whose CPA and TCPA are lower
than CPA and TCPA alarm settings.)
Lost target
Number of dangerous
targets
Data for target
selected
NM
Plotter display
www.furuno.co.jp
All brand and product names are trademarks, registered trademarks or service marks of their respective holders.
2
SOLAS MODE OPERATIONS
How to set up for a voyage
1. Press the NAV STATUS key.
[NAV STATUS]
NAV STATUS: 0
***
STATUS DETAIL
***
UNDER WAY USING
ENGINE
2. If your navigation status is different
from that shown, do a) and b) below. If
it is the same as shown, go to step 3.
a) Press the ENT key.
b) Press ▲ ▼ or to choose
appropriate status and then
press the ENT key.
3. Press ► to show page 2 of the NAV
STATUS menu.
[DESTINATION]
WX
*************
(0/0)
[NEW?]
4. NEW is selected; press the ENT key.
[DESTINATION]
WX
ENTER A NEW
DESTINATION
QUIT:[NAV STATUS]
5. Press the ENT key. Use the
CursorPad to enter destination and
then press the ENT key.
6. Press ► to show page 3 of the NAV
STATUS menu.
[ARRIVAL TIME]
WX
DATE - -/- - -[UTC]:
TIME[UTC]: - -*- -
7. DATE is selected; press the ENT key.
8. Use the CursorPad to enter the date
of arrival and then press the ENT key.
9. TIME is selected; press the ENT key.
10. Use the CursorPad to enter the
estimated time of arrival and then
press the ENT key. Use 24-hour
notation.
11. Press ► to show page 4 of the NAV
STATUS menu.
[CARGO TYPE & CREW]
WX
CREW: 0
TYPE NO: 00
**** TYPE DETAIL****
NOT AVAILABLE
12. CREW is selected; press the ENT key.
13. Use the CursorPad to enter number of
crew and then press the ENT key.
14. TYPE NO. is selected; press the ENT
key.
15. Use the CursorPad to choose type of
vessel and then press the ENT key.
16. Press ► to show page 5 of the NAV
STATUS menu.
[DRAUGHT]
W
DRAUGHT: m0.0
17. Press the ENT key.
18. Use the CursorPad to enter ship’s
draught, and then press the ENT key.
19. Press the DISP key to close the menu.
How to send a message
1. Press the MENU key.
2. Use ▼ ▲ or to choose MSG and then
press the ENT key.
[MSG]
CREATE MSG
TX LOG
RX LOG
3. CREATE MSG is selected; press the
ENT key.
[CREATE MSG]
SET MSG TYPE
SET MSG
SEND MSG
4. SET MSG TYPE is selected; press the
ENT key.
[SET MSG TYPE]
ADRS TYPE: BROAD CAST
MMSI : - - - - - - - - -
MSG TYPE : NORMAL
CHANNEL: ALTERNATE
MMS
5. ADRS TYPE is selected; press the
ENT key.
BROAD CAST
ADRS CAST
6. Choose ADRS CAST or BROAD CAST
as appropriate. Press the ENT key.
7. For BROAD CAST, go to step 8. For
ADRS CAST, “MMSI” is selected; press
the ENT key, use the CursorPad to
enter MMSI number of receiving vessel
and then press the ENT key.
8. MSG TYPE is chosen; press the ENT
key.
SAFETY
NORMAL
9. Choose message type: NORMAL
(message other than safety) or
SAFETY (important navigational or
meteorological warning). Press the
ENT key.
10. CHANNEL is chosen; press the ENT
key.
ALTERNATE
BOTH A & B
A
B
11. Choose which channel to transmit your
message over.
12. Press the ENT key.
13. Press the MENU key to return to the
CREATE MSG sub-menu.
14. Choose SET MSG and press the ENT
key.
15. Use the CursorPad to enter your
message. Use ▼ or ▲ to choose
character; ◄ or ► to shift the cursor.
16. Press the ENT key to return to the
CREATE MSG sub-menu.
17. Choose SEND MSG; press the ENT
key to send your message.
18. Press ◄ to choose YES; press the
ENT key.
How to set CPA/TCPA
1. Press the MENU key.
2. Use ▲ ▼ or to choose USER
SETTINGS and then press the ENT
key.
3. Use ▲ ▼ or to choose CPA/TCPA
ALARM and then press the ENT key.
[CPA/TCPA ALARM]
CPA : nm6.00
TCPA : 60 min
ALARM MODE : ON
ALARM BUZZER: ON
QUIT[MENU]
4. CPA is selected; press the ENT key.
5. Use the CursorPad to enter CPA and
then press the ENT key.
6. TCPA is selected; press the ENT key.
7. Use the CursorPad to enter TCPA and
then press the ENT key.
8. ALARM MODE is selected; press the
ENT key.
9. Choose ON to enable the CPA/TCPA
alarm feature; OFF to disable it. Press
the ENT key.
10. ALARM BUZZER is selected; press
the ENT key.
11. Choose ON to enable the CPA/TCPA
audio alarm, or OFF to disable it. Press
the ENT key.
12. Press the DISP key to close the menu
INLAND AIS OPERATIONS
How to select INLAND AIS mode
1. Press the NAV STATUS key.
[NAV STATUS]
NAV STATUS: 15
AIS MODE: SOLAS
***
STATUS DETAIL
***
NOT DEFINED
(DEFAULT)
3
2. Push ▼ to select AIS MODE then
press the ENT key.
SOLASRX
INLAND
3. Select INLAND then press the ENT
key.
How to enter voyage-related data
1. Press the NAV STATUS key.
[NAV STATUS]
NAV STATUS: 0
AIS MODE: INLAND
***
STATUS DETAIL
***
UNDER WAY USING
ENGINE
2. Press ► to show the DESTINATION
sub-menu.
[DESTINATION]
WX
*************
(0/0)
[NEW?]
3. NEW is selected; press the ENT key.
[DESTINATION]
WX
ENTER A NEW
DESTINATION
QUIT:[NAV STATUS]
4. Press the ENT key. Enter destination
(20 characters max.) then press the
ENT key.
5. Press ► to show the ARRIVAL TIME
sub-menu.
[ARRIVAL TIME]
WX
DATE - -/- - -[UTC]:
TIME[UTC]: - -*- -
6. DATE[UTC] is selected; press the ENT
key.
7. Enter the date of arrival then press the
ENT key.
8. TIME[UTC] is selected; press the ENT
key.
9. Enter the estimated time of arrival then
press the ENT key. Use 24-hour
notation.
10. Press ► to show the DRAUGHT
sub-menu.
[DRAUGHT]
WX
SOLAS DRAUGHT: m0.0
INLAND DRAUGHT:
0.00m
11 SOLAS DRAUGHT is selected; press
the ENT key.
12. Enter SOLAS draught then press the
ENT key.
13. INLAND DRAUGHT is selected; press
the ENT key.
14. Enter inland draught then press the
ENT key.
15. Press ► to show the CARGO TYPE
sub-menu.
[CARGO TYPE]
WX
TYPE NO.: 00
**** TYPE DETAIL****
NOT AVAILABLE
16. TYPE NO. is selected; press the ENT
key.
17. Select type of vessel/cargo then press
the ENT key.
18. Press ► to go to the ERI CODE
sub-menu.
[ERI CODE]
WX
ERI CODE: 8000
****CODE DETAIL****
VESSEL,
TYPE UNKNOWN
19. ERI CODE is selected; press the ENT
key.
20. Enter four-digit ERI code then press
the ENT key.
21. Press ► to go to the NO. OF
PERSONS sub-menu.
[NO. OF PERSONS]
WX
CREW: _ _ _
PASSENGER: _ _ _ _
SHIPBOARD PERSONNEL
_ _ _
NO. OF PERSONS: 0
22. CREW is selected; press the ENT key.
23. Enter number of crew then press the
ENT key.
24. PASSENGER is selected; press the
ENT key.
25. Enter number of passengers then
press the ENT key.
26. SHIPBOARD PERSONNEL is
selected; press the ENT key.
27. Enter number of shipboard personnel
then press the ENT key.
28. NO. OF PERSONS is selected; press
the ENT key.
29. Enter the total number of persons then
press the ENT key.
30. Press ► to go to the LENGTH&BEAM
sub-menu.
[LENGTH&BEAM]
WX
LENGTH OF SHIP
m0.0
BEAM OF SHIP: 0.0 m
31. Enter the length and beam of your ship,
pressing the ENT key after entering
each item.
32. Press ► to go to the OTHER
sub-menu.
[OTHER]
W
DYNAMIC INFORMATION
RATE: AUTO
HAZARDOUS CARGO:
UNKNOWN
UN/LOADED: UNKNOWN
33. DYNAMIC INFORMATION RATE is
selected; press the ENT key.
AUTO
10SEC
5SEC
2SEC
34. Select option then press the ENT key.
35. HAZARDOUS CARGO is selected;
press the ENT key.
NUMBER OF CONES 0
NUMBER OF CONES 1
NUMBER OF CONES 2
NUMBER OF CONES 3
B-FLAG
UNKNOWN
36. Select appropriate item then press the
ENT key.
37. UN/LOADED is selected; press the
ENT key.
UNKNOWN
LOADED
UNLOADED
38. Select appropriate item then press the
ENT key.
39. Press the DISP key to close the menu.
How to send an ETA message
1. Press the MENU key.
2. Select MSG then press the ENT key.
[MSG]
TEXT
ETA/RTA
NO. OF PERSONS
EMMA WARNING
WATER LEVEL
3. Select ETA/RTA then press the ENT
key.
[ETA/RTA]
CREATE MSG
ETA LOG
RTA LOG
4. CREATE MSG is selected; press the
ENT key.
[CREATE MSG]
SET MSG TYPEE
SET DESTINATION
SET ETA
SEND MSG
5. SET MSG TYPE is selected; press the
ENT key.
[SET MSG TYPE]
MMSI : 000000000
CHANNEL: ALTERNATE
RETRY TIMES: 3
MMS
6. MMSI is selected; press the ENT key.

Specyfikacje produktu

Marka: Furuno
Kategoria: Niesklasyfikowane
Model: FA-150

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Furuno FA-150, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Niesklasyfikowane Furuno

Furuno

Furuno 1751 Mark-2 Instrukcja

22 Września 2024
Furuno

Furuno GP-1650WDF Instrukcja

21 Września 2024
Furuno

Furuno GP-33 Instrukcja

16 Września 2024
Furuno

Furuno 1761 Mark-2 Instrukcja

15 Września 2024
Furuno

Furuno DRS2D Instrukcja

15 Września 2024
Furuno

Furuno TZTL15F Instrukcja

15 Września 2024
Furuno

Furuno Verado Instrukcja

15 Września 2024
Furuno

Furuno GP-330B Instrukcja

14 Września 2024
Furuno

Furuno 1761 Mark-3 Instrukcja

14 Września 2024
Furuno

Furuno GP-7000F Instrukcja

14 Września 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Black Diamond

Black Diamond BD1121530000ALL1 Instrukcja

15 Października 2024
Husqvarna

Husqvarna K 970 SmartGuard Instrukcja

15 Października 2024
Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024