Instrukcja obsługi Furman P-8 PRO C

Furman Listwa zasilająca P-8 PRO C

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Furman P-8 PRO C (20 stron) w kategorii Listwa zasilająca. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/20

PROTECTION

EXTREME

VOLTAGE

P-8 PRO C

P-8 PRO C POWER CONDITIONER

CLASSIC SERIES OWNER’S MANUAL

CONDITIONNEUR D’ALIMENTATION P-8 PRO C / P-8 PRO C ACONDICIONADOR DE ENERGíA

SéRIE CLASSIqUE GUIDE DE L’UTILISATEUR / SERIE CLÁSICA MANUAL DEL PROPIETARIO

DIN-00033-A

ENGLISH

Page 1

FRANÇAIS

Page 7

ESPAÑOL

Page 13

P-8 PRO C OWNER’S MANUAL

P-8 PRO C GUIDE DE L’UTILISATEUR

P-8 PRO C MANUAL DEL PROPIETARIO

The AC plug on your new 20 Amp Furman product is a NEMA 5-20P. The blades are oriented

perpendicular to each other to disnguish the 20 Amp plug from the more familiar 15 Amp

plug, the NEMA 5-15P which has two parallel blades. All products that are rated for 20 Amps

must use the perpendicular blade plug to obtain a UL (Underwriters’ Laboratory) safety lisng.

We recognize that using an unfamiliar plug may be an inconvenience to our customers, but this

is a maer of public safety.

So where do I plug in the NEMA 5-20P?

Devices with a NEMA 5-20P plug will require a 20 Amp or higher rated circuit. Please noce

NEMA 5-20R receptacles have one T-shaped contact that can accept either the horizontal

parallel blade or the vercal perpendicular blade. According to the Naonal Electrical Code, if

one wishes to ulize loads in excess of 15 Amps, the electrical wiring, circuit breakers, and receptacles must

be rated at least 20 Amps. Locaons without 20 Amp receptacles should be inspected and upgraded to the

proper NEMA specicaon by a licensed professional. The NEMA 5-20P (Plug) is designed to be used with a

NEMA5-20R (Receptacle), prey simple – right?

Is there any alternative?

Yes! You may adapt the NEMA 5-20P to a 15 Amp outlet with the intenon to draw no more than 12

Amperes connuously. Furman has designed the ADP-1520B in compliance with UL specicaons just for

this purpose. Please contact your Furman dealer to verify the ADP-1520B is right for your applicaon. In a

business locaon, a local re inspector may not allow the use of adaptors deemed noncompliant. The safety listed ADP-1520B would be a

worthy consideraon in such instances.

The ADP-1520B is UL and CSA compliant.

OK, suppose I use an improper adapter with a 15A outlet and then I draw 20

Amps anyway. What will happen?

Probably nothing serious, since most commercial and many residenal circuits are at least 20 Amps. However, some residences do

use 15 Amp circuits; if you aempt to draw more than 12 Amps, the circuit breaker on the ADP-1520B will “trip”. In order to avoid this

inconvenience, check the electrical service panel, locate and conrm the size of the breaker installed, if the 12A breaker trips reduce the

load to below 12 Amperes. Avoid repeated nuisance trips which can result in damaged equipment or in extreme cases re. Note nuisance

trips can be an indicaon of electrical faults in equipment or the electrical system, yet usually it’s due to high current draws

What Kind of Plug is This, Anyway?

15A outlet 20A

outlet

P - 8 P R O C

FURMAN P-8 PRO C FEATURES

• SMP+ with extreme voltage shutdown

• LiFT (Linear Filtering Technology) with zero ground contaminaon

• Eight rear panel outlets and one front panel outlet

• BNC connector on the rear panel allows you to aach any standard (12V 0.5 Amp) goose-neck lamp to illuminate

the rear of your rack

• 2400 Wa rang, with a high in-rush 20 Amp circuit breaker

• Rugged road-worthy steel chassis

• 10 foot power cord with NEMA 5-20P plug

• Three year limited warranty

INTRODUCTION

Thank you for purchasing a Furman P-8 PRO C Power Condioner and Congratulaons on your choice. The P-8 PRO C fea-

tures Furman’s venerable Series Mul-Stage Protecon Plus (SMP+) circuit as well as our exclusive Linear Filtering Technol-

ogy (LiFT). Together, these technologies comprise what is, without queson, the worlds most advanced and comprehensive

transient voltage surge suppressor / condioner.

SMP+ (SERIES MULTI-STAgE PROTECTION PLUS)

Furman’s SMP+ surge suppression virtually eliminates service calls. Tradional surge suppression circuits “sacrice” them-

selves when exposed to mulple transient voltage spikes, requiring the dismantling of your system, and repair of your

surge suppressor. Not so with SMP+. With Furman’s SMP+, damaging transient voltages are safely absorbed, clamped, and

dissipated. Unique to Furman’s SMP+ is its clamping voltage level. While other designs oer clamping voltages that are well

above 330 Vpk, Furman’s SMP+ clamps at 188 Vpk, (133 VAC RMS). This level of protecon is only available with Furman’s

SMP+ technology. Addionally, Furman’s trusted over-voltage circuitry protects against frequent and accidental connecons

to 208 or 240 VAC, by shung o the incoming power unl the over voltage condion is corrected.

LIFT (LINEAR FILTERINg TEChNOLOgy)

Unfortunately, tradional AC lters/condioners have been designed for unrealisc laboratory condions. Prior technol-

ogies, whether mulple pole lter or convenonal series mode, could actually harm audio and video performance more

than they help, due to the resonant peaking of their anquated, non-linear designs. Under certain condions, these designs

can actually add more than 10 dB of noise to the incoming AC line! Worse sll, lost digital data, the need to re-boot digital

pre-sets, or destroyed digital converters are frequently caused by excessive voltage spikes and AC noise contaminang the

equipment ground. Furman’s SMP+ with LiFT takes another approach, ensuring opmal performance through linear ltering

and no leakage to ground.

SAFETy INFORMATION

To obtain best results from your Furman P-8 PRO C Power Condioner, please read this manual carefully before using.

WARNING

To reduce the risk of electrical shock, do not expose this equipment to rain or moisture. Dangerous high voltages are present

inside the enclosure. Do not remove the covers. Refer servicing to qualied personnel only.

IMPORTANT SAFETY INSTRUCTIONS

(Please read prior to installaon)

1. Please read and observe all safety and operang instrucons before installing your P-8 PRO C unit. Retain these instruc-

ons for future reference.

2. Your P-8 PRO C unit should not be used near water – for example, near a bathtub, kitchen sink, laundry tub, in a wet base-

ment, near a swimming pool, etc.

ENgLISh FRANÇAIS ESPAÑOL

P-8PRO C

Specyfikacje produktu

Marka:	Furman
Kategoria:	Listwa zasilająca
Model:	P-8 PRO C

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Furman P-8 PRO C, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Listwa zasilająca Furman

Furman M-8S Instrukcja

22 Września 2024

Furman M-8Dx Instrukcja

22 Września 2024

Furman AC-215A Instrukcja

22 Września 2024

Furman SS-6B-Pro Instrukcja

21 Września 2024

Furman M-8x2 Instrukcja

18 Września 2024

Furman PL-8 C Instrukcja

18 Września 2024

Furman PL-PRO C Instrukcja

18 Września 2024

Furman PL-PLUS C Instrukcja

18 Września 2024

Furman SS-6B Instrukcja

17 Września 2024

Furman P-8 PRO C Instrukcja

17 Września 2024

Instrukcje Listwa zasilająca

Najnowsze instrukcje dla Listwa zasilająca

Bauhn AP5W-0624 Instrukcja

15 Października 2024

Bauhn AP6W-0324 Instrukcja

15 Października 2024

Hama PowerCube 00223195 Instrukcja

9 Października 2024

CyberPower P0420SUD0-DE Instrukcja

9 Października 2024

CyberPower B0520SC0-DE Instrukcja

9 Października 2024

GoGen SP16A5 Instrukcja

7 Października 2024

Geist RCMW248-103PH6TL21-OD Instrukcja

3 Października 2024

Middle Atlantic RLNK-1015V Instrukcja

2 Października 2024

Middle Atlantic PD-DC-45 Instrukcja

2 Października 2024

Bachmann Desk 2 Instrukcja

1 Października 2024