Instrukcja obsługi Fujifilm X-M1

Fujifilm aparat fotograficzny X-M1

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Fujifilm X-M1 (4 stron) w kategorii aparat fotograficzny. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/4

Key Features:



Powered 18" Sub-woofer

Loudspeaker System with JBL

DrivePack®technology for portable

or installed use



3600 watts peak power, 1800 watts

continuous



18-inch Differential Drive®

low-frequency driver for extended

low-frequency output



Stylized and ergonomically designed

powder-coated die-cast aluminum

handles



Eight 3-inch ﬂy track suspension

points and twenty-four M10 ﬁttings

(optional detachable ﬂying ﬁttings

and forged eye bolt kits available)



Optional DPAN or DPCN

(CobraNet™) digital audio input

modules available for HiQnet™

network control

Applications:



High-impact audio/visual

presentations

 Theatrical sound design

 Houses of Worship

 Sound reinforcement rental companies

 Live performance venues

 Performing arts centers

 Corporate learning centers

 Themed entertainment venues

The VPSB7118DP is a powered 18"

integrated sub-woofer loudspeaker

system featuring 3600 watts of peak

output power, 1800 watts continuous,

and onboard digital signal processing.

Designed in cooperation with Crown

International, the JBL DrivePack®

DP-1 features leading-edge

technology such as patented high

efﬁciency Class-I power ampliﬁer

technology. Network control and

monitoring is optionally available via

System Architect software.

The VPSB7118DP transducer is

JBL’s 2268G 18" diameter Differential

Drive®woofer.

Speciﬁcations:

Frequency Response (+/-3 dB): 39 Hz - 145 Hz

Frequency Range (-10 dB): 29 Hz - 165 Hz

Maximum Peak Output1: 129 dB SPL 1m

Transducer Section:

Low Frequency Section: JBL 2268G, 457 mm (18 in) dia., 76 mm (3 in) Dual Coil,

Differential Drive®, Direct Cooled

Bandpass Nominal Impedance: 4 ohms

System:

DP1 Internal Ampliﬁcation Output

(at nominal load): 3600 Watts Peak, 1800 Watts Continuous

DP1 Output Section: 1-Channel, Class I

Audio Input connector: XLR with loop-through

Network control connector: Ethernet, RJ45 (DPAN, DPCN options)

Signal Processing: DSP based, resident in Input Module. See page 2 For

input module speciﬁcations.

System Management: DSP based limiters for mechanical and thermal

protection

AC Power Operating Range: Auto Select 90-132VAC/216-264VAC, 50/60 Hz

AC Line Voltage: 50/60 Hz, Auto-Detect; 120V/240V (-15%, +10%)

AC Input Connector: Neutrik PowerCon (NAC 3MPA)

AC Loop-thru: Neutrik PowerCon (NAC 3MPB)

AC Current Requirement: 6A per system at 120V, 3A per system at 240V

Enclosure:

Box Construction: 5/8 in. multi-ply exterior grade Baltic birch. Internally

braced. Black DuraFlex™ ﬁnish.

Suspension System: 8 standard air-cargo 3 in. track and 24 M10 ﬁttings.

Grille: 14 Gauge Black powder-coated perforated steel with

foam backing.

Dimensions (H x W x D): 514.4 x 701.8 x 812.8 mm

20.25 x 27.63 x 32 in.

Net Weight: 54 kg (129 lb)

1Measured with IEC shaped noise in free ﬁeld conditions.

Powered 18"

Integrated

Subwoofer System

VPSB7118DP

VPSP7118DP-AN (Optional network input module)

VPSB7118DP-CN (Optional input module with digital audio)

DPIP (Standard dbx Input Module)

JBL DrivePacks are equipped with a modular input bay and are available in several

versions. The standard DPIP input module features analog audio inputs and

sophisticated onboard digital signal processing technology. Precision bandpass

limiting, pre-equalization ﬁlters and automatic self-test functions ensure optimized

performance. Front panel controls include a 32-position detented rotary attenuator

calibrated in 0.5 dB steps which provides a 16 dB range of control. This can be

useful for setting up downﬁll shading or overall system gain structuring. Another

feature is the “Enable Subwoofer Filter” button. This is a momentary-contact type

switch which enables or disables the selected function. On subwoofer applications,

the low-pass frequency is set to 80 Hz. For full-range systems used with subwoofers,

the high-pass is raised to 80 Hz.

DPAN (Optional HiQnet Network Input Module with Analog Audio)

In addition to all of the features included on the standard input module, the DPAN

adds 100 Mb Ethernet networking functionality and HiQnet compatability. It enables

remote control and monitoring via HiQnet System Architect™ software. Network

Control and Monitoring is enabled by the JBL DP-SCP (DrivePack Software Control

Panel) supplied within HiQnet System Architect. Network capabilities include

monitoring of status, input and output levels, clipping, temperature, load faults and

gain reduction. Additional control features available in software include load

supervision, dynamic processing, ten internal pre-e.q.ﬁlter presets, delays, onboard

noise and sine-wave generators, network device event logging, and user alert

messaging.

DPCN (Optional HiQnet Network Input Module with Digital Audio)

In addition to all of the features included on the DPAN, the DPCN input module adds

CobraNet™ to the mix and offers the ability to direct up to 64 audio channels on one

network, with digital audio and remote control and monitoring via Ethernet combined

on a single cable. DPCN includes the option to use an analog input as a backup

audio source providing you complete reliability and ﬂexibility to cover any situation.

With HiQnet System Architect providing the software user interface, the HiQnet

communications protocol provides remote access to digital speaker preset ﬁles in the

JBL DrivePack. As with the DPAN, user-addressable features include ten internal pre-

e.q. ﬁlter presets, up to 2 seconds of delay per channel, onboard noise and sine-wave

generators, network device event logging, and user alert messaging.

JBL DrivePack input modules are used to implement crossovers, equalization, time alignment, and

protection for the attached speaker system. Speaker-dependent settings are not user-conﬁgurable

from any version of the input module. The following options are available for connectivity, audio

signal path and control functionality.

Specyfikacje produktu

Marka:	Fujifilm
Kategoria:	aparat fotograficzny
Model:	X-M1
Kolor produktu:	Czarny
Rodzaj zasilania:	Bateria
Wysokość produktu:	66.5 mm
Szerokość produktu:	116.9 mm
Głębokość produktu:	39 mm
Waga produktu:	280 g
Typ HD:	Full HD
Technologia baterii:	Litowo-jonowa (Li-Ion)
Obsługiwane systemy operacyjne Mac:	Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion, Mac OS X 10.8 Mountain Lion
Typ ekranu:	TFT
Rozdzielczość wyświetlacza aparatu:	920000 px
Długość przekątnej ekranu:	3 "
Obsługiwane typy kart pamięci:	SD, SDHC, SDXC
Pojemność pamięci wewnętrznej:	- MB
Zakres temperatur (eksploatacja):	0 - 40 °C
Zakres wilgotności względnej:	10 - 80 %
Nagrywanie wideo:	Tak
Wi-Fi:	Tak
Standardy Wi- Fi:	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Obsługiwane formaty plików wideo:	H.264, MOV
Skrócona instrukcja obsługi:	Tak
Rodzaj baterii:	NP-W126
Liczba baterii:	1
Baterie w zestawie:	Tak
HDMI:	Tak
Długość ogniskowa:	- mm
Pictbridge:	Tak
Wersja USB:	2.0
Cyfrowe zbliżenie:	- x
Waga (łącznie z baterią):	330 g
Rozdzielczość statycznego obrazu:	4896 x 3264, 4896 x 2760, 3264 x 3264, 3456 x 2304, 3456 x 1944, 2304 x 2304, 2496 x 1664, 2496 x 1408, 1664 x 1664
Typ aparatu/kamery:	Obudowa bezlusterkowca
Megapiksele:	16.3 MP
Rozmiar przetwornika obrazu:	- "
Typ przetwornika obrazu:	CMOS
Maksymalna rozdzielczość obrazu:	4896 x 3264 px
Stabilizator obrazu:	Nie
Obsługiwane proporcje obrazu:	1:1, 3:2, 16:9
Suma megapikseli:	16.5 MP
Format kompresji zdjęć:	JPG
Format czujnika:	Advanced Photo System type-C (APS-C)
Rozdzielczości wideo:	1280 x 720,1920 x 1080 px
Maksymalna rozdzielczość filmu:	1920 x 1080 px
Zoom optyczny:	- x
Regulator ostrości:	Automatyczne/Ręczne
Tryby autofokusa:	Continuous Auto Focus, Multi Point Auto Focus, Tracking Auto Focus
Pomocniczy promień przy Auto Focus (AF):	Tak
Wykrywanie obiektów z automatyczną regulacją ostrości (AF):	Twarz
Balans bieli:	Auto, Custom modes, Fluorescent, Incandescent, Shade
Tryby scenerii:	Portrait, Sports, Landscape (scenery)
Opóżnienie samowyzwalacza:	2, 10 s
Efekty fotograficzne:	Black&White, Sepia, Vivid
System plików:	DPOF 1.1, Exif 2.3, RAW
Czułość ISO:	200,400,800,1600,3200,6400,12800,25600,Auto
Tryby naświetlania:	Aperture priority AE, Manual, Shutter priority AE
Kontrola naświetlania:	Program AE
Korekcja naświetlania:	± 2EV (1/3EV step)
Czułość ISO (min):	200
Czułość ISO (maks):	25600
Tryby lampy błyskowej:	Auto, Red-eye reduction, Slow synchronization
Proporcje obrazu:	3:2
Pole widzenia:	100 %
Rodzaj złącza HDMI:	Mini
Wbudowany flesz:	Tak
Ostrość:	TTL
Gniazda pamięci:	1
Minimalna ogniskowa (35mm equiv):	- mm
Maksymalna ogniskowa (35mm equiv):	- mm