Instrukcja obsługi Fuji Micro Genforce F6200RI

Fuji Niesklasyfikowane Micro Genforce F6200RI

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Fuji Micro Genforce F6200RI (29 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/29

Petrol Powered Inverter Generators

User Manual

[Revision 2.0 March 2017]

RETAIN THIS MANUAL FOR FUTURE REFERENCE

PLEASE READ THIS MANUAL CAREFULLY BEFORE USE

The product is NOT supplied with engine oil, although traces of oil from the manufacturing

process may be present. It is essential to add adequate engine oil of the correct type to the

engine before use see –Checking and Changing Engine Oil. Failure to add engine oil will void the

product warranty.

Petrol Powered Inverter Generators

E&OE © MIT 2 2017

Safety

Safety messages are designed to alert you to possible dangers or hazards that could cause death, injury or

equipment or property damage if not understood or followed. Safety messages have the following symbols:

You WILL be KILLED or

SERIOUSLY INJURED if you do

not follow instructions.

You CAN be KILLED or

SERIOUSLY INJURED if you do

not follow instructions.

You CAN be INJURED if you do

not follow instructions or

equipment damage may occur.

It is important that you read and

understand the instruction manual before

use and keep the manual in a safe place

for future reference. Safety information

presented here is generic in nature some –

advice may not be applicable to every

piece of equipment.

All safety precautions must be observed to

reduce the risk of personal injury when

operating the equipment.

The term “equipment" refers to your

product, be it electrical mains, battery or

petrol engine powered.

IMPORTANT Handle the equipment –

safely and carefully.

BEFORE USE - If you are not familiar with

the safe operation/handling of this

equipment, or are in any way unsure of any

aspect of suitability or correct use for it

your application, you should complete

training conducted by a person or

organization qualified in safe use and

operation of this equipment, including

fuel/electrical handling and safety.

WARNINGS

 Read all safety warnings and all

instructions. Failure to follow warnings

and instructions may result in electric

shock, fire and/or serious injury.

 Never run a petrol engine in confined

areas.

 Do not operate the equipment in

flammable or explosive environments,

such as in the presence of flammable

liquids, gases or dust. Engine and

equipment may create sparks or heat

that may ignite vapours, dust etc

 Keep clear of moving parts.

 This equipment may be a potential

source of electric shock if misused.

 Do not operate the equipment if it is

damaged, malfunctioning or is in an

excessively worn state.

 Do not allow others to use the

equipment unless they have read this

manual and are adequately trained .

 When using the equipment, basic

safety precautions detailed here must

always be followed to reduce the risk

of fire, electric shock, personal injury

and material damage.

 When wiring electrically powered

equipment, follow all electrical and

safety codes.

 sure all power sources conform to En

equipment voltage requirements and

are disconnected before connecting

equipment.

General Work Area Safety

Work areas should be clean and well it.

Do not e the equipment operat if

bystanders, animals etc are within

operating range of the equipment or the

general work area.

Personal Safety

Keep packaging away from children - risk

of suffocation! Operators must use the

equipment correctly. When using the

equipment, consider conditions and pay

due care to persons and property.

Prevent unintentional starting of the

equipment - ensure equipment and power

source switches are in the OFF position

before connecting or moving the

equipment. Do not carry equipment with

hands/fingers touching any controls.

Remove any tools or other items that are

not a part of the equipment from it before

starting or switching on.

Stay alert and use common sense when

operating equipment. Do not overreach.

Keep proper footing and balance at all

times. Do not use equipment when tired or

under the influence of drugs, alcohol or

medication. This equipment is not intended

for use by persons with reduced physical,

sensory or mental capabilities.

You must wear appropriate protective

equipment when operating, servicing, or

when in the operating area of the

equipment to help protect from serious

injury, including eye injury, inhalation of

toxic fumes, burns, and hearing loss.

Always wear eye protection. Protective

equipment such as respirators, non-skid

safety shoes, hard hat, hearing protection

etc should be used for appropriate

conditions. Other people nearby should

also wear appropriate personal protective

equipment. Do not wear loose clothing or

jewellery, which can be caught in moving

parts. Keep hair and clothing away from

the equipment.

If devices are provided for the connection

of dust extraction and collection facilities,

ensure these are connected and properly

used. Use of dust collection can reduce

dust-related hazards.

General Equipment Use and Care

Do not force the equipment. Use the

correct equipment for your application. The

correct equipment will perform better and

be safer within its design parameters. Do

not use the equipment if the ON/OFF

switch malfunctions any equipment that –

cannot be controlled with the ON/OFF

switch is dangerous and must be repaired.

Use the equipment and accessories etc. in

accordance with these instructions, taking

into account working conditions and the work

to be performed. Using the equipment for

operations different from those intended

could result in hazardous situations.

Before use, inspect the equipment for

misalignment or binding of moving parts,

loose components, damage or any other

condition that may affect its operation. If

damaged, have the equipment repaired by an

authorized service center or technician before

use.

Always keep the equipment and accessories

(cutting tools, nozzles, bits etc) properly

maintained. Keep the equipment, controls

and handles dry and free from dirt, oil and

grease.

Store the equipment out of reach of children

or untrained persons. To avoid burns or fire

hazards, let the equipment cool completely

before transporting or storing. Never place

the equipment in places where there are

flammable materials, combustible gases or

combustible liquids etc.

The equipment is not weatherproof, and

should not be stored in direct sunlight, at high

ambient temperatures or locations that are

damp or very humid.

Generator Use and Care

WARNINGS

 If the generator is for back-up power to a

house etc, it must be connected to the

building electrical system by a qualified

electrician and must comply with

relevant laws and electrical codes. If not

connected correctly, use of the

generator may present electrocution,

electric shock, explosion and fire

hazards.

 The generator creates high voltage and

current electricity. Do not connect

incompatible devices.

 Never insert any object other than

compatible connectors into any

generator output connector.

 Do not operate the equipment with wet

hands or clothing.

 When using the generator, ensure to

keep it and all connected cables away

from other electrical cables.

 Operate the generator on solid, level

surfaces only, with at least 1m (3’)

between it and other equipment or

objects.

Petrol Powered Inverter Generators

E&OE © MIT 3 2017

General Fuel Safety

Petrol/fuel/gasoline is extremely

flammable keep clear of –

naked flames or other ignition

sources.

 Do not spill fuel. If you spill fuel, wipe

it from equipment immediately if fuel –

gets on your clothing, change them

immediately

 Do not smoke near fuel.

 Always shut off the engine before

refuelling.

 Do not refuel a hot engine.

 Open the fuel cap carefully to allow

any pressure build-up in the tank to

release slowly.

 Always refuel in well ventilated areas.

 Always check for fuel leakage. If fuel

leakage is found, do not start or run

the engine until all leaks are fixed.

General Service Information

 Have the equipment serviced or

repaired at authorized service centres

by qualified personnel only.

 Replacement parts must be original

equipment manufacturer (OEM) to

help ensure that equipment safety is

maintained.

 Do not attempt any maintenance or

repair work not described in this

instruction manual.

 After use, the equipment and

components may still be hot allow –

the equipment to cool and disconnect

spark plugs and/or electrical power

sources and/or batteries from it before

making adjustments, changing

accessories or performing repair or

maintenance.

 Do not make adjustments while the

equipment is running.

 Perform all service related activities

under suitable conditions, such as a

workshop etc.

 Replace any worn, damaged or

missing warning labels immediately.

 Do not clean equipment with solvents,

flammable liquids or harsh abrasives.

DANGER

Running petrol engines in confined areas CAN KILL IN

MINUTES. Engine exhaust fumes contain carbon-

monoxide a deadly gas that you cannot smell or see. –

NEVER run a petrol engine in confined areas EVEN IF

windows and doors are open. ONLY run petrol engines

OUTDOORS and away from doors, windows and

vents.

Do not operate the equipment in hazardous locations,

such as where there may be a risk of fire or explosions

from flammable liquids, gases or dust.

Do not operate the equipment in confined areas where

exhaust gases, smoke or fumes could reach dangerous

concentrations.

Do not refuel petrol engines while they are running.

Never smoke while refuelling petrol engines.

For generators, the electrical output is potentially lethal

and must only be connected to a fixed electrical

installation by an appropriately licensed person.

Be aware that the equipment may include hazardous

components, such as blades, hot surfaces and moving

parts.

Specyfikacje produktu

Marka:	Fuji
Kategoria:	Niesklasyfikowane
Model:	Micro Genforce F6200RI

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Fuji Micro Genforce F6200RI, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Niesklasyfikowane Fuji

Fuji GW690II Instrukcja

23 Września 2024

Fuji ST-705 Instrukcja

23 Września 2024

Fuji V2 Instrukcja

23 Września 2024

Fuji Professional GW690III Instrukcja

23 Września 2024

Fuji 35-SE Instrukcja

23 Września 2024

Fuji 350-FS Instrukcja

23 Września 2024

Fuji GSW690II Instrukcja

23 Września 2024

Fuji GX680 Instrukcja

23 Września 2024

Fuji AX Multi Program Instrukcja

23 Września 2024

Fuji HD-S Instrukcja

23 Września 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Black Diamond BD1121530000ALL1 Instrukcja

15 Października 2024

Husqvarna K 970 SmartGuard Instrukcja

15 Października 2024

Stihl HT 70 Instrukcja

15 Października 2024

Ernesto H14270 Instrukcja

15 Października 2024

Uniden BT MIC KIT Instrukcja

15 Października 2024

Vaude Omnis Bike 26 Instrukcja

15 Października 2024

ART ProChannel II Instrukcja

15 Października 2024

Aukey DR02J Instrukcja

15 Października 2024

Master Lock 653EURD Instrukcja

15 Października 2024

Roland FR-18 Diatonic Instrukcja

15 Października 2024