Instrukcja obsługi Frigidaire GLHS69EJPB

Frigidaire lodówka GLHS69EJPB

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Frigidaire GLHS69EJPB (22 stron) w kategorii lodówka. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/22
PN: 241856000 (April 2007)
Important Safety Instructions ............. 2
Installation ............................................ 3
Connecting Water Supply .................... 4
Door Removal Instructions.................. 5
Mechanical Temperature Controls ...... 6
Electronic Temperature Controls ........ 6
Automatic Ice & Water Dispenser ....... 9
Normal Operating Sounds & Sights ... 14
Care and Cleaning ................................ 15
Warranty ................................................ 16
Before you Call ..................................... 17
Features at a Glance ............................ 21
Use & Care Manual
Refrigerator
Side by Side
READ AND SAVE THESE INSTRUCTIONS
Got Questions?
Need Parts or Service?
Before Calling Your
Local Repair Service - CALL:
(United States)
1-800-944-9044
(Canada)
1-800-668-4606
√√
√√√ Resolve many service issues over the
phone at your convenience!
√√
√√
√If we can’t resolve your service issue,
we’ll schedule a reputable local
service technician for you!
√√
√√√ Order Genuine Electrolux Parts &
Accessories
√√
√√
√Purchase Extended Warranty
Protection
Solutions Hotline
2
IMPORTANT SAFETY INSTRUCTIONS
FOR YOUR SAFETY
• Do not store or use gasoline, or other flammable liquids in
the vicinity of this or any other appliance. Read product
labels for warnings regarding flammability and other
hazards.
• Do not operate the refrigerator in the presence of
explosive fumes.
• Avoid contact with any moving parts of automatic ice
maker.
• Remove all staples from the carton. Staples can cause
severe cuts, and also destroy finishes if they come in
contact with other appliances or furniture.
CHILD SAFETY
Destroy or recycle the carton, plastic bags, and any exterior
wrapping material immediately after the refrigerator is
unpacked. Children should NEVER use these items to play.
Cartons covered with rugs, bedspreads, plastic sheets or
stretch wrap may become airtight chambers, and can quickly
cause suffocation.
ELECTRICAL INFORMATION
•The refrigerator must be plugged into its own
dedicated 115 Volt, 60 Hz., 15 Amp, AC only electrical
outlet. The power cord of the appliance is equipped with a
three-prong grounding plug for your protection against
PROPER DISPOSAL OF YOUR REFRIGERATOR OR
FREEZER
WARNING WARNING
WARNING WARNING
WARNING
Please Read All Instructions Before Using This
Refrigerator.
WARNING WARNING
WARNING WARNING
WARNING
These Guidelines Must Be Followed To Ensure That
Safety Mechanisms In This Refrigerator Will Operate
Properly.
IMPORIMPORIMPORIMPORIMPOR TTTTTANTANTANTANTANT
Pressing and holding the On/Off button for 3 seconds,
located on the left side of the temperature control panel
(Electronic controls), or turning the Freezer and Fresh Food
controls to “0” (Mechanical controls) will disable your
refrigerator’s cooling system, but does not disconnect the
power to the light bulb and other electrical components. To
turn off power to your refrigerator you must unplug the
power cord from the electrical outlet.
Risk of child entrapment
Child entrapment and suffocation
are not problems of the past.
Junked or abandoned refrigerators
or freezers are still dangerous –
even if they will sit for “just a few
days.” If you are getting rid of your
old refrigerator or freezer, please
follow the instructions below to
help prevent accidents.
Before you throw away your old refrigerator/ freezer:
• Remove doors.
• Leave shelves in place so children may not easily climb
inside.
• Have refrigerant removed by a qualified service
technician.
Grounding type
wall receptacle
Power cord with
3-prong grounded plug
Do not, under
any circumstances,
cut, remove,
or bypass the
grounding prong.
electrical shock hazards. It must be plugged directly into a
properly grounded three prong receptacle. The receptacle
must be installed in accordance with local codes and
ordinances. Consult a qualified electrician. Avoid
connecting refrigerator to a Ground Fault Interruptor (GFI)
circuit. Do not use an extension cord or adapter plug.
• If the power cord is damaged, it should be replaced by an
authorized service technician to prevent any risk.
• Never unplug the refrigerator by pulling on the power
cord. Always grip the plug firmly, and pull straight out
from the receptacle to prevent damaging the power cord.
• Unplug the refrigerator before cleaning and before
replacing a light bulb to avoid electrical shock.
• Performance may be affected if the voltage varies by
10% or more. Operating the refrigerator with insufficient
power can damage the compressor. Such damage is
not covered under your warranty.
• Do not plug the unit into an electrical outlet controlled by a
wall switch or pull cord to prevent the refrigerator from
being turned off accidentally.
CA CA CA CA CAUTIONUTIONUTIONUTIONUTION
To avoid personal injury or property damage, handle
tempered glass shelves carefully. Shelves may break
suddenly if nicked, scratched, or exposed to sudden
temperature change.
3
This Use & Care Manual provides general operating
instructions for your model. Use the refrigerator only as
instructed in this Use & Care Manual. Before starting the
refrigerator, follow these important first steps.
LOCATION
• Choose a place that is near a grounded electrical outlet.
Do Not use an extension cord or an adapter plug.
• If possible, place the refrigerator out of direct sunlight
and away from the range, dishwasher or other heat
sources.
• The refrigerator must be installed on a floor that is level
and strong enough to support a fully loaded refrigerator.
• Consider water supply availability for models equipped
with an automatic ice maker.
INSTALLATION
INSTALLATION
3. Check both doors to be sure seals touch cabinet on all four
sides.
LEVELING
All four corners of your refrigerator must rest firmly on a solid floor.
Your refrigerator is equipped with adjustable front rollers to help level
your unit. To ensure proper door seal and assist door closing, the
refrigerator should be tilted 1/4” (6 mm), front to back.
To Level Your Refrigerator:
1. Remove toe grille. (See
“To Remove Toe Grille”
.)
2. Use flat-blade screwdriver or 3/8” socket wrench to adjust
front rollers.
Raise
CA CA CA CA CAUTIONUTIONUTIONUTIONUTION
Do Not install the refrigerator where the temperature
will drop below 55°F (13°C) or rise above 110°F (43°C).
The compressor will not be able to maintain proper
temperatures inside the refrigerator.
Do Not block the toe grille on the lower front of your
refrigerator. Sufficient air circulation is essential for the
proper operation of your refrigerator.
Installation Clearances
• Allow the following clearances for ease of installation,
proper air circulation, and plumbing and electrical
connections:
Sides & Top ------------------ 3/8”
Back---------------------------- 1”
DOOR OPENING
NONO
NONO
NOTETE
TETE
TE
If your refrigerator is placed with the door hinge side
against a wall, you may have to allow additional space so
the door can be opened wider.
Your refrigerator should be positioned to allow easy access to a
counter when removing food. For best use of drawers and freezer
baskets, the refrigerator should be in a position where both the
refrigerator and freezer doors can be fully opened.
NONO
NONO
NOTETE
TETE
TE
The refrigerator doors are designed to shut by themselves
within a 20 degree opening.
4
CONNECTING HOUSEHOLD WATER SUPPLY TO REFRIGERATOR
WARNING WARNING
WARNING WARNING WARNING
To avoid electric shock, which can cause death or
severe personal injury, disconnect the refrigerator from
electrical power before connecting a water supply line
to the refrigerator.
CA CA CA CA CAUTIONUTIONUTIONUTIONUTION
To Avoid Property Damage:
•Copper tubing is recommended for the water supply
line. Water supply tubing made of ¼” plastic is not
recommended since it greatly increases the potential
for water leaks. Manufacturer will not be responsible
for any damage if plastic tubing is used for supply
line.
• DO NOT install water supply tubing in areas where
temperatures fall below freezing.
• Chemicals from a malfunctioning softener can
damage the ice maker. If the ice maker is connected
to soft water, ensure that the softener is maintained
and working properly.
IMPORIMPOR
IMPORIMPORIMPOR TT
TTTANTANT
ANTANTANT
Ensure that your water supply line connections comply with
all local plumbing codes.
Before Installing The Water Supply Line, You Will Need:
•Basic Tools: adjustable wrench, flat-blade screwdriver,
and PhillipsTM screwdriver
• Access to a household cold water line with water pressure
between 30 and 100 psi.
• A water supply line made of ¼ inch (6.4 mm) OD, copper
tubing. To determine the length of copper tubing needed,
you will need to measure the distance from the ice maker
inlet valve at the back of the refrigerator to your cold water
pipe. Then add approximately 7 feet (2.1 meters), so the
refrigerator can be moved out for cleaning (as shown).
• A shutoff valve to connect the water supply line to your
household water system. DO NOT use a self-piercing type
shutoff valve.
• A compression nut and ferrule (sleeve) for connecting the
water supply line to the ice maker inlet valve.
NONO
NONO
NOTETE
TETE
TE
Water line kit number 5303917950, available from your
appliance dealer at additional cost, contains 25 feet (7.6
meters) of ¼ inch OD copper tubing, a saddle type shutoff
valve (nonpiercing), (2) ¼ inch brass compression nuts, (2)
ferrules/sleeves, and instructions for installing a water
supply line.
To Connect Water Supply Line To Ice Maker Inlet Valve
1. Disconnect refrigerator from electric power source.
2. Place end of water supply line into sink or bucket. Turn ON
water supply and flush supply line until water is clear. Turn
OFF water supply at shutoff valve.
3. Unscrew plastic cap from water valve inlet and discard
cap.
4. Slide brass compression nut, then ferrule (sleeve) onto
water supply line, as shown.
5. Push water supply line into water valve inlet as far as it will
go (¼ inch). Slide ferrule (sleeve) into valve inlet and
finger tighten compression nut onto valve. Tighten another
half turn with a wrench; DO NOT over tighten.
6. With steel clamp and screw, secure water supply line to
rear panel of refrigerator as shown.
7. Coil excess water supply line (about 2½ turns) behind
refrigerator as shown and arrange coils so they do not
vibrate or wear against any other surface.
8. Turn ON water supply at shutoff valve and tighten any
connections that leak.
9. Reconnect refrigerator to electrical power source.
10. To turn ice maker on, lower wire signal arm (side mounted)
or set the ice maker’s On/Off power switch to the “I”
position (rear mounted).
IMPORIMPOR
IMPORIMPORIMPORTT
TTTANTANT
ANTANTANT
After connecting the water supply, refer to
“How to Prime
the Water Supply System”
for important information about
priming an empty water supply system.
Your refrigerator’s water supply system includes
several tubing lines, a water filter, a water valve and a
water tank. To ensure that your water dispenser works
properly, this system must be completely filled with
water when your refrigerator is first connected to the
household water supply line.
Copper water line
from household water supply
(Include enough tubing in loop to allow
moving refrigerator out for cleaning.)
Ferrule
(Sleeve)
Copper
water line
Water Valve
Valve Inlet
Water Valve
Bracket
Steel
Clamp
Plastic Water Tubing
to Ice Maker
Fill Tube
Brass
Compression
Nut
5
DOOR REMOVAL INSTRUCTIONS
DOOR REMOVAL INSTRUCTIONS:
If it is necessary to move the refrigerator through narrow doorways, follow these
steps to remove the doors.
Adjustable
Wrench
Socket
Wrench Set
OR
Phillips head
and
Flat Head
Screw Driver
™
Tools Necessary:
3/8”
Fixed
Wrench
Top Hinge
Cover Screw
Bottom
Hinge
Screw
Top
Hinge
Screw
Before you start:
1Make sure the electrical power cord is unplugged from the wall outlet.
2Remove any food from the door shelves.
3Close the doors.
To remove the hinge cover: (some models)
1Remove the three screws from the cover over the top door hinges.
2Pull the cover forward about a half inch and lift it off.
To remove the refrigerator door:
1Remove top hinge cover screw on refrigerator door and remove cover. (some models)
2Trace lightly around the door’s top hinge with a pencil. This makes reinstallation easier.
3Remove the two screws from the top hinge. Lift the door off of the bottom hinge and set it
aside.
4Remove the three bottom hinge screws and hinge, if necessary.
To remove the freezer door:
1Detach the multi-wire cable connector located above the top hinge. Grasp both sides of
the connector firmly and pull apart.
2Remove top hinge cover screw on freezer door and remove cover. (some models)
3Trace lightly around the door’s top hinge with a pencil. This makes reinstallation easier.
4Detach the water tube from the connector located below the freezer door. The connector
releases when you press its outer sleeve inward.
5Remove the screws from the top hinge and pull the multi-wire cable through it.
6Lift the door off of the bottom hinge. Lay the door on its side to avoid damage to the
Remove the three bottom hinge screws and hinge, if necessary.
To reinstall the refrigerator and freezer doors, reverse the above steps.
Hinge
Screws
Cover Screw
Top Hinge
Top Hinge
Cover
OR
6
ELECTRONIC TEMPERATURE CONTROLS
ALLOWING COOLING TIME BEFORE USE
To ensure safe food storage, allow your refrigerator to operate with the doors closed for at least 8 to 12 hours before placing food inside. During
this cooling period, you do not need to adjust the controls, which are preset at the factory.
SETTING COOLING TEMPERATURES
Your refrigerator comes with a state-of-the-art electronic digital control system. The system’s control panel is located at the top of the the fresh
food compartment.
The two digital displays on the left half of the control panel indicate the current settings or temperatures of your freezer and fresh food
compartments. The models with a 2-digit temperature display are for reference only, and do not display the current accurate compartment
temperature. Should you desire to see what the current accurate temperature is, place a separate thermometer inside the freezer or fresh
food compartment in the desired location.
MECHANICAL TEMPERATURE CONTROLS
COOL DOWN PERIOD
To ensure safe food storage, allow the refrigerator to operate with the doors closed for at least 8 to 12 hours before loading it with
food.
REFRIGERATOR & FREEZER CONTROLS
TEMPERATURE ADJUSTMENT
• After 24 hours, adjust the controls as needed. Adjust temperatures gradually; move the knob in small increments, allowing the
* IMPORTANT
Turning the Freezer and Fresh Food Controls to “0” turns off the
compressor and prevents your refrigerator from cooling, but does not
disconnect the power to the light bulb and other electrical components.
To turn off power to your refrigerator you must unplug the power cord
from the electrical outlet.
NOTE
When changing control settings, wait 24 hours for the temperature to stabilize before making additional changes.
EDIUGTNEMTSUJDAERUTAREPMET
mraWooTsItnemtrapmoCdooFhserFfI sdrawoTylthgilSlortnoCdooFhserFnruT redloC .
dloCooTsItnemtrapmoCdooFhserFfI sdrawoTylthgilSlortnoCdooFhserFnruT dloC .
mraWooTsItnemtrapmoCrezeerFfI sdrawoTylthgilSlortnoCrezeerFnruT redloC .
dloCooTsItnemtrapmoCrezeerFfI sdrawoTylthgilSlortnoCrezeerFnruT dloC .
ffOrotaregirfeRnruToT* oTslortnoCdooFhserFdnarezeerFnruT .0
Refrigerator & Freezer Controls
(Features may vary according to model.)
temperature to stabilize.
• For colder temperatures, turn the knob towards Colder.
• For warmer temperatures, turn the knob towards Cold.
To maintain temperatures, a fan circulates air in the refrigerator and freezer compartments. For good circulation, do not block cold air
vents with food items.
7
(Single Digit Display - Features may vary.)
NONONONONOTETETETETE
The advanced electronic control system in your
refrigerator includes additional display modes that
service professionals can use to rapidly diagnose
performance issues.
TEMPERATURE ADJUSTMENT
To adjust the temperature to a higher or lower setting, press
the Up (Cold) or Down (Colder) button closest to the display.
The first time you press the button, the display shows current
setting you entered. Each press of the button after that
changes the setting by one.
The display shows your new setting momentarily, then
changes back to the current temperature.
ELECTRONIC TEMPERATURE CONTROLS
Numeric Display
Freezer Fresh
Food
Warmest 1 1
Factory Setting 6 6
Coldest 9 9
Temperature Display (2-Digit)
Freezer Fresh Food
F° C° F° C°
Warmest 6° -14° 47° 8°
Factory Setting 0° -18° 37° 3°
Coldest -6° -21° 33° 1°
IF TEMPERATURE DISPLAYS FLASH...
If ever you see both temperature displays continously flashing,
it may indicate that the control system has detected a
performance problem. Call your service representative, who
can interpret the flashing message.
To maintain temperatures, a fan circulates air in the refrigerator
and freezer compartments. For good circulation, do not block
cold air vents with food items.
Temperature Adjustment Guide
If Fresh Food compartment is too warm
Adjust Fresh Food control one degree
colder by pressing Down (Colder) button.
If Fresh Food compartment is too cold
Adjust Fresh Food control one degree
warmer by pressing the Up (Cold) button.
If Freezer compartment is too warm
Adjust Freezer control one degree colder
by pressing Down (Colder) button.
If Freezer compartment is too cold
Adjust Freezer control one degree warmer
by pressing the Up (Cold) button.
8
TURNING THE COOLING SYSTEM ON AND OFF
You can disable the cooling system in your refrigerator by pressing the On/Off button located on the left side of the temperature
control panel. To ensure that you do not accidentally turn off the cooling system, the button does not work unless you press
and
hold
it for three seconds. Once you disable the cooling system, all refrigeration to the freezer and fresh food compartments stops.
To turn the cooling system back on, you must again press
and hold
the On/Off button for three more seconds.
TEMPERATURE CONTROLS
NONONONONOTETETETETE
Pressing the On/Off button on the control panel disables your refrigerator’s cooling system but does not disconnect power to
lights and other electrical components. To turn off power to your refrigerator you must unplug the power cord from the wall
outlet.
Each time you make settings on the control panel, a single audible tone acknowledges your input.
Air Filter Status Light (not available on all models)
Green Filter OK.
Yellow Air filter is about 80 percent used. Please order
new one.
Red Air filter is 100 percent used. Please change
now.
AIR FILTER INDICATOR & STATUS LIGHTS
Your refrigerator’s air filter needs to be replaced from time to
time. You can monitor the need for replacement by referring to
the status light while the air filter is “ON”. To turn on the air
filter, press the “Air Filter” button. To turn off the air filter, press
the “Air Filter” button. To RESET the air filter, press the “Air
Filter” button and hold for 3 seconds.
Cooling System On/Off Button Indicator
RESPONDING TO ALARMS (Audible Tones & Indicator
Lights)
Your refrigerator’s control system can convey the following
information through audible tones and the alarm indicator
lights.
Door
Ajar
Flashing
Green
9
9
9
99 Freezer or
refrigerator door
has been open
for over five
minutes.
Close door to disable and
reset alarm.
REPLACING THE AIR FILTER
In general, you should change the air filter every six months to
ensure optimal filtering of refrigerator odors. You may want to
adjust this time period depending on the types and amounts of
food you typically store in your refrigerator.
To replace your air filter:
1Push the plastic bubble tab located on the side of the air
filter housing. This releases the hinged bottom half to drop
open.
2Remove the old filter and discard it.
3Unpackage the new filter and place it inside the hinged
bottom half of the housing.
4Push the hinged bottom
half upward until the tab
snaps into closed position.
5Press and hold the Filter
Reset button on the
electronic control panel for
3 seconds. When the
Filter OK light comes on,
the status has been reset.
6Press and hold the Filter
Reset button for 3
seconds again to turn off
the filter status system.
To order new air filter cartridges, contact the dealer
where you bought your refrigerator, contact Electrolux
Solutions Hotline at 1-800-944-9044, or go to our web
site at www.frigidaire.com. It would be beneficial to order
some cartridges when you first install your refrigerator.
Be sure and ask for air filter replacement cartridge, part
# 241504902.

Specyfikacje produktu

Marka: Frigidaire
Kategoria: lodówka
Model: GLHS69EJPB

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Frigidaire GLHS69EJPB, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje lodówka Frigidaire

Frigidaire

Frigidaire FRTE1622AW Instrukcja

19 Lutego 2025
Frigidaire

Frigidaire FRT17G5JSK Instrukcja

14 Stycznia 2025
Frigidaire

Frigidaire PRDA1922AF Instrukcja

7 Stycznia 2025
Frigidaire

Frigidaire FRSG2115AV Instrukcja

7 Stycznia 2025
Frigidaire

Frigidaire FFPH44M4LM Instrukcja

15 Października 2024
Frigidaire

Frigidaire FRT15HB3DQ Instrukcja

15 Października 2024
Frigidaire

Frigidaire FGHT2146KR Instrukcja

14 Października 2024
Frigidaire

Frigidaire FRS6KR5JSW Instrukcja

14 Października 2024
Frigidaire

Frigidaire FFPT12F3MM Instrukcja

14 Października 2024
Frigidaire

Frigidaire FFET1022UB Instrukcja

13 Października 2024

Instrukcje lodówka

Najnowsze instrukcje dla lodówka

Richome

Richome KC-9339 Instrukcja

23 Marca 2025
Infiniton

Infiniton FGC-262C80XEV Instrukcja

18 Marca 2025
Toshiba

Toshiba GR-RS600WI-PMY37 Instrukcja

18 Marca 2025
Guzzanti

Guzzanti GZ-352A Instrukcja

17 Marca 2025
Bosch

Bosch KGN27NBDAG Instrukcja

13 Marca 2025
Hotpoint

Hotpoint HTSD18A011A1 Instrukcja

12 Marca 2025
Hisense

Hisense HRBF46 Instrukcja

11 Marca 2025
Ardes

Ardes AR5I50P Instrukcja

11 Marca 2025
AEG

AEG NSK6F181CS Instrukcja

11 Marca 2025
Bushman

Bushman DC285L-X Instrukcja

10 Marca 2025