Instrukcja obsługi FoodSaver V2460

FoodSaver Pakowacz próżniowy V2460

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla FoodSaver V2460 (6 stron) w kategorii Pakowacz próżniowy. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/6

Features

For important safety information and helpful tips, please refer to the FoodSaver Reference Guide

included in your kit. Questions? Visit us at www.foodsaver.com or call 1-800-777-5452 (U.S.) or

1-877-804-5383 (Canada), Mon-Fri 8am-8pm, Sat 9am-6pm EST. Get tips on vacuum packaging

and order FoodSaver accessories.

Accessory Hose

Storage

Appliance Control

Panel

Easy-lock Latch

Pen Storage

Roll Storage

Compartment

Bag Cutter and

Cutter Bar

Easy-Clean Drip Tr ay

Vacuum Channel

Foam Gasket

Extra-wide Sealing Strip

Features of Your FoodSaver Appliance

QuickStart

V2420/V2440/V2460/V2480

Shown V2420; V2440, V2460 and V2480 operate in the same manner except where noted.

Vacuum & Seal Button

This button has three uses:

1. Press to vacuum package and seal

your food air-tight with a single

touch. Shuts off automatically.

2. Press to cancel process at any point.

3. Press to vacuum canisters when using

model V2460.

Canister Vacuum Button

(Models V2420, V2440 & V2480)

Press to achieve best vacuum

for canisters and accessories.

Features

Shown V2420; V2440, V2460 and V2480 operate in the same manner except where noted.

Advanced Design Features

Adjustable Food Settings

Select food type to optimize

the seal – Dry (normal seal time)

for foods without liquid; Moist

(longer seal time) for juicy foods

Accessory Port

Attach accessory

hose here and use

to vacuum package

with FoodSaver

Canisters and

Accessories

Two Speed Settings

Select speed to optimize

vacuum for different size bags

and canisters – Normal for

average-sized bags, canisters

and all accessories; Fast for

larger-sized bags and canisters

The user-friendly, intuitive control panel makes it easy for you to get the most out of your FoodSaver

Advanced Design Features.

CrushFree™Instant Seal Button

This button has three uses:

1. Press to immediately stop the vacuum

process and begin sealing the bag. Use

to prevent crushing delicate items such

as bread, cookies and pastries.

2. Press to create a seal when making

bags from a FoodSaver Roll.

3. Press to create a seal on Mylar bags

(such as a potato chip bag) to keep

food sealed air-tight.

Seal Indicator Light

This light has two uses:

1. Constant light indicates

sealing process is engaged.

2. Flashes to indicate error.

Bags & Rolls

1. Place item(s) in bag, allowing at least 3 inches of

space between bag contents and top of bag.

2. Open appliance lid and place open end of bag

into Vacuum Channel (I).

3. Close lid and use Latch (D) to lock.

4. Press appropriate Food Setting Button (L) –

Choose Moist for juicy foods or for foodsDry

without liquid. Appliance will default to Dry setting.

5. Press appropriate Speed Setting Button (N) –

Choose Normal for average-sized bags, canisters

and all accessories or Fast for larger-sized bags and

canisters. Appliance will default to Normal speed.

6. Press Vacuum & Seal Button (O) to begin vacuum

and sealing process. Motor will continue to run until

bag is fully vacuumed, then will automatically seal.

7. When Seal Indicator Light (Q) turns off, unlock

latch, lift lid and remove bag. Refrigerate or freeze

if needed. (See FoodSaver Reference Guide for food

safety tips.)

Note: Let appliance cool down for 20 seconds after

each use. Always store appliance with the Latch

(D)

in the unlocked position.

1. Open appliance lid and place roll into Roll

Storage Compartment (F).

2. Lift up Bag Cutter Bar (G).

3. Pull bag material to the outer edge of the

Sealing Strip (K) (G)and lower the Cutter Bar .

4. Close and lock the lid using the Latch (D).

5. Press Seal button (R).

6. When Seal Indicator Light (Q) turns off,

sealing is complete. Unlock latch and lift lid.

7. You now have one sealed end and need to cut

the bag to the length you need. Pull out enough

bag material to hold item to be vacuum packed,

plus 3 inches.

8. Gently press and slide Bag Cutter (G) across

the length of the roll.

Now you are ready to vacuum package with your

new bag (see below).

Getting Started

Registering your appliance is quick and easy at www.foodsaver.com. If you register on our website, you will be

eligible for special bag and accessory introductory offers. Refer to the registration card in the box.

How to Make a Bag from a FoodSaver Roll

How to Vacuum Package with FoodSaver Bags

Place Bag on Sealing Strip Close and Latch Lid Press Seal Button

Place Bag in Vacuum Channel Close and Latch Lid Press Vacuum & Seal Button

345

2 3 6

Specyfikacje produktu

Marka:	FoodSaver
Kategoria:	Pakowacz próżniowy
Model:	V2460
Rodzaj zasilania:	ATX
Szerokość produktu:	244 mm
Głębokość produktu:	244 mm
Ilość portów Ethernet LAN (RJ-45):	1
Karta graficzna:	GMA 950
Kanały wyjścia audio:	7.1 kan.
Liczba portów USB 2.0:	4
Producent procesora:	Intel
Liczba gniazd pamięci:	4
Bez kody korekcyjnego:	Tak
Maksymalna pojemność pamięci:	4 GB
Gniazdo procesora:	LGA 775 (Socket T)
Rodzaj płyty:	ATX
Ilość gniazd USB 2.0:	4
Liczba portów PS/2:	2
Układ audio:	Realtek ALC888
Kontroler LAN:	Realtek RTL8111B
Liczba portów VGA (D-Sub):	1
System operacyjny:	Microsoft Windows 2000 / XP / XP 64-bit / Vista / Vista 64-bit
Pamięć karty graficznej podsystemu graficznego:	224 MB
Liczba równoległych portów komunikacyjnych:	1
Ilość gniazd SATA:	4
Wejście audio CD/AUX:	Tak
Gniazdo stacji dyskietek:	Tak
Gniazdo rozszerzeń:	1 x PCI Express x16\n- 1 x PCI Express x1\n- 2 x PCI\n- 1 x HDMR
Ilość gniazd COM:	1
Obsługa procesora FSB:	1333 Mhz